"IR Series High-Temperature Furnace Brochure Now Available" Maximum 1800℃ / High-speed Heating and Cooling / Temperature Control Performance [with Observation Video] Suitable not only for observation during heating but also as a heating furnace.

It is a compactly designed high-temperature heating observation device. It can be used on your microscope or micro-scope.

The IR-TPS is a high-temperature stage for microscopes that has been developed to achieve the contradictory goals of "high functionality and low cost." In addition to the standard configuration, advanced system equipment can be built with high-quality options. It can be used for research such as material analysis and quality control under precise temperature control in air, inert gas, or vacuum environments. 【Features】 ○ Uniform high-temperature heating of the sample at a speed of up to 1500°C within 60 seconds using infrared concentration ○ Energy-saving clean heating ○ Easy maintenance For more details, please contact us or refer to the catalog.

• Analytical Equipment and Devices

Tests can be conducted while observing the condition of the material surface [using a dual-swing crosshead], keeping the sample position centered to capture any changes!

The "CATY-T3H SYSTEM" is a tabletop-sized high-temperature tensile observation device that allows for thermal fatigue testing while observing the state of the sample surface in real-time. It can be used with simple operations and supports high-temperature and high-speed heating. By adopting a dual-swing crosshead, it maintains the sample's position in the center even if the sample piece expands or contracts, thereby minimizing the displacement of the observation position. By combining with optional units, it can also accommodate tests such as bending observation. 【Features】 ■ Capable of high-temperature and high-speed heating up to 1500°C * However, this depends on the shape and thermal capacity of the sample. ■ Testing of not only metallic materials but also composite materials of surface-mounted components is possible. ■ Stress measurement, low-cycle fatigue testing, and creep testing can be conducted in gas flow or vacuum conditions. ■ Realization of combined testing for thermal fatigue under stress and real-time observation. * For more details, please refer to the documentation. Feel free to contact us with any inquiries.

• Strength Testing Equipment

Real-time observation of ultra-high temperatures! A system that enables high-speed heating and cooling, allowing for the observation and recording of behavioral changes in real-time to fulfill your desire to see "now."

The high-temperature observation stage "IR-18SP" for microscopes is a product that allows for the heating observation of samples placed on a microscope stage. Despite its compact furnace body, it can achieve rapid heating from room temperature to 1500°C in just 30 seconds, and it enables ultra-high temperature heating up to a maximum temperature of 1800°C. 【Features】 ■ Capable of high-temperature heating up to 1800°C ■ Simple structure for easy maintenance ■ The furnace itself has a hermetic chamber structure, allowing heating in a free atmosphere ■ High-speed response enables precise temperature control ■ Allows for "in-situ observation" with microscopes, endoscopes, and laser microscopes ■ Capable of recording and analyzing videos linked to temperature ■ Compact and usable on a tabletop It is compatible with metal microscopes, endoscopes, laser microscopes, etc., and systems utilizing existing microscopes can also be proposed.

• Testing Equipment and Devices

Rapid heating at approximately 50°C/sec using focused light heating method, with the possibility of rapid cooling when the heating lamp is turned off. Compatible with various atmospheres.

The "IR Series" (IR Series) of focusing heating furnaces manufactured by Yokokura Seisakusho, used by various research institutions around the world, is an IR image furnace that utilizes near-infrared focusing heating. It features a clean environmental structure that allows for ultra-fast heating and cooling. The product lineup includes the "IR-HP (6 Parabolic Radiation)," which dramatically expands the temperature distribution area compared to conventional heating furnaces with rapid heating and cooling from six directions; the "IR-QP (4 Elliptical Shared Focusing)," which offers double the temperature distribution area and rapid heating compared to conventional heating furnaces with rapid heating and cooling from four directions; and the "IR-TP (2 Elliptical Shared)," which enables microscopic observation compared to conventional heating furnaces with rapid heating and cooling from two directions. 【Main Features】 - Clean, energy-efficient, high performance - Vacuum and gas replacement + observation - High-speed heating with low power (1500°C in 30 seconds with only 4kW) - Heater uses tungsten filament with a high heating temperature of 3400K - Watt density is 10 to 20 times higher than nichrome heaters - Real-time temperature control available - Compact size For more details, please contact us or refer to the catalog.

• Electric furnace

To customers considering the introduction of vehicle detection sensors for parking lot construction, design, and management: Are you facing any issues with the challenges you currently have or selecting the right sensors for parking lot management? Hotron offers free materials that explain how to utilize vehicle detection sensors and the benefits of their introduction! ▽ Here is the lineup of materials ◉ Basic Guide to Vehicle Detection Sensors This guide focuses on the challenges and solutions in parking lot operations, introducing the overview of vehicle detection sensors. ◉ Key Points for Introducing Vehicle Detection Sensors This material discusses the benefits of introduction based on installation locations and specific challenges. ◉ Case Studies of Vehicle Detection Sensor Implementation This document introduces the challenges before implementation and the results after introduction. For more details, please download from our website and check it out. https://www.hotron.co.jp/download/

"Electronic contracts for national and local governments are also available with 'paperlogic Electronic Contracts'" In December of last year (2023), we inquired about our service 'paperlogic Electronic Contracts' regarding the 'Law and Orders Related to Regulations on New Business Activities' utilizing the Digital Agency's gray zone resolution system. As a result, we received a response from the Digital Agency stating that 'paperlogic Electronic Contracts' can be used as an electronic record in place of paper contracts for national and local government contracts. "'paperlogic' is endorsed by the Digital Agency" In this inquiry, we received confirmation that 'paperlogic Electronic Contracts' can be utilized as an electronic record in place of paper contracts for national and local government contracts. From now on, you can confidently use 'paperlogic Electronic Contracts' not only for contracts between private companies but also for all types of contracts in local government practices, including administrative contracts and discretionary contracts. For business document digital transformation and electronic contract services, feel free to consult with paperlogic.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If you require a detailed technical explanation, please contact us.