SPACECOOL wins the Good Design Gold Award for 2024!

Dramatically change the oil mist environment in manufacturing sites! Introducing the mist collector.

The "Mistrainer" is a product that maintains a high removal rate for one year due to its unique core-lessing filter. The mist that is suctioned is introduced into a cylindrical special filter (3 to 8 pieces). As the collected oil is discharged to the bottom, a filtration space is created at the top of the filter, maintaining high removal capability and processing air volume. The collected oil can also be discharged and reused. 【Features】 ■ Achieves high removal rate ■ Filter replacement once a year ■ ECO-friendly cost reduction *For more details, please refer to the PDF document or feel free to contact us.

• Oil Mist Collector

"SPACECOOL" blocks heat from sunlight and the atmosphere with zero energy.

[Limited to the Chubu Area] We are currently conducting trial installations! It blocks heat from sunlight and the atmosphere, reducing heat absorption and providing comfortable coolness. "SPACECOOL" is a material that lowers temperatures below that of the outside air with zero energy. Our company offers environmental improvement proposals utilizing this material, and we are conducting on-site installations limited to the Chubu area. *Areas include Mie, Aichi, Gifu, and parts of Shizuoka. SPACECOOL not only blocks heat from sunlight and the atmosphere and reduces heat absorption, but it also radiates heat into space, effectively discarding heat. In actual use in outdoor warehouses and tents, we have confirmed a temperature drop of approximately -10 degrees in perceived temperature.

• Other environmental analysis equipment

If you're looking for environmentally friendly clean energy, heat pumps are the way to go.

A heat pump is a technology that gathers thermal energy from sources such as the air with low power consumption to generate and utilize a large amount of thermal energy. It is an energy-saving technology used in everyday appliances like air conditioners, refrigerators, and more recently, vending machines. By using a heat pump, it is possible to obtain more thermal energy than the electrical energy consumed, allowing for effective use of valuable energy. Additionally, it can significantly reduce CO2 emissions, contributing to the preservation of the global environment.

• Other energy equipment

[Simulation materials available] Significantly reduces power consumption and CO2! Mitsubishi Heavy Industries heat pump that uses air heat to boil water.

A heat pump is a mechanism that moves heat from a low-temperature area to a high-temperature area. In air conditioners equipped with heat pumps, heating is achieved by releasing heat collected from the outdoor air into the indoor space via a refrigerant, while cooling is done by releasing heat collected from the indoor air to the outdoor space. By adopting a two-stage compressor type "scroll rotary compressor" and an "intermediate pressure gas injection structure," significant improvements in performance and efficiency are realized. Additionally, we also handle a circulation system that maintains and heats up warmed water. 【Features】 ■ Dramatic improvement in operating performance under low outdoor temperature conditions ■ Hot water supply up to 90°C is possible even at an outdoor temperature of -25°C, with no reduction in capacity down to -7°C ■ Achieves a COP of 4.3 (in the intermediate period) with an inverter type in the 30kW class ■ Conducts high-efficiency energy-saving operation throughout the year *For more details, please refer to the external link page or feel free to contact us.

• Other pumps
• Special Pump

Are you having trouble inspecting motors that cannot be stopped? We can monitor them remotely without the need for workers to visit the site.

Are you having trouble inspecting motors that cannot be stopped? "Motor Predictive Maintenance IoT" is a system that utilizes IoT to continuously monitor the operating conditions of rotating equipment such as motors and pumps at a low cost. This product allows for remote monitoring via internet connection without the need for workers to physically visit the site. By connecting sensors to smartphones or tablets via Bluetooth and collecting data, it eliminates the need for a relay device (gateway) by utilizing the internet connection of the tablet. Developed by a pump manufacturer with expertise in the structure and failure causes of rotating equipment, this system can identify the causes of failures to some extent by frequency band. 【Features】 ■ Supports 24-hour operating motors ■ Enables predictive maintenance before breakdowns ■ Low installation and running costs ■ Safe and quick information gathering *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

Prevent on-site dangers such as "noise and vibration" that accompany workers! Shorten motor inspection time and detect abnormalities early with a simple monitoring system!

"Motor Predictive Maintenance IoT" is a system that utilizes IoT to continuously monitor the operating conditions of rotating equipment such as motors and pumps at a low cost. Inspection work in areas where "workers cannot enter" or "places that are dangerous when approached" can lead to personal accidents, so companies are advancing measures to address this issue. Our product allows for remote monitoring via internet connection without the need for workers to physically visit the site. Monitoring of vibration acceleration, vibration velocity, and temperature is possible, and vibrations in frequency bands up to 10,000 Hz can be measured over time. Sensors connect to smartphones or tablet devices via Bluetooth for data collection, and by utilizing the internet connection of the tablet device, a relay device (gateway) is unnecessary. Developed by a pump manufacturer knowledgeable about the structure and failure causes of rotating equipment, this system can identify the causes of failures to some extent by frequency band. [Features] ■ Predictive maintenance before failure occurs ■ Low installation and running costs ■ Safe and quick information gathering *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

Prepare for the unexpected with predictive maintenance to detect machine abnormalities early! We utilize IoT to prevent troubles before they occur.

Are you fully prepared for troubles such as sudden machine stoppages? "Motor Predictive Maintenance IoT" is a system that utilizes IoT to continuously monitor the operating conditions of rotating equipment such as motors and pumps at a low cost. This product allows for remote monitoring without the need for workers to physically visit the site, using internet connections. Monitoring of vibration acceleration, vibration velocity, and temperature is possible, with vibrations in the frequency range up to 10,000 Hz measured over time. Sensors connect to smartphones or tablet devices via Bluetooth for data collection, eliminating the need for a relay device (gateway) by utilizing the internet connection of the tablet. Developed by a pump manufacturer knowledgeable about the structure of rotating equipment and causes of failure, this system can identify the causes of failure to some extent by frequency band. 【Features】 ■ Predictive maintenance before failure occurs ■ Low installation and running costs ■ Safe and quick information gathering *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

● The production time for casting prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly creating sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be created in a single molding process. This allows for the verification of multiple types in a short period.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

This time, the ACS-5000 is available as a facial recognition terminal compatible with FaceMe Security's add-on feature "Face Terminal," enabling access control management that combines "advanced anti-spoofing features" with high-speed facial recognition powered by edge AI. ■ Main Features 1. Accelerated Authentication Processing FaceMe Security is optimized for the MediaTek Genio 700's NPU, achieving faster facial recognition processing and reduced CPU load compared to processing solely on the CPU. It ensures stable authentication without delays even during peak times such as clocking in and out, contributing to alleviating congestion. 2. Advanced "Anti-Spoofing" Optimized for the IR + RGB camera mounted on the ACS-5000, it can quickly detect fraudulent authentication using photos, videos, or 3D masks within 0.6 seconds, ensuring reliable identity verification. 3. Door Control Without Additional Equipment FaceMe Security can directly control the digital I/O of the ACS-5000, allowing for the construction of an access control management system without the need for additional equipment. This simplifies system configuration and reduces implementation costs.

Features: ●Core 3 N355/N150 ●DDR5 SODIMM x 1 (up to 16GB) ●HDMI 1.4, VGA, LVDS ●2.5GbE x 3, SATA 6Gb/s, GPIO 8-bit ●USB 3.2 Gen 2 x 2, RS-232/422/485 x 2, RS-232 x 2 ●Mini PCIe x 1, M.2 2230 E-Key x 1, M.2 3052 B-Key x 1 ●DC input 9V～36V

Features: ● Equipped with Intel Core Ultra 5 125H/Ultra 7 155H・155U ● DDR5 5600MHz SO-DIMM x2 slots (up to 96GB) (sold separately) ● LVDS x 1, eDP x 1, DP x 1, HDMI x 1 ● LAN x 3, SATA 6Gb/s x 1, 8-bit GPIO ● USB 3.2 Gen2 x 2, USB 2.0 x 4 ● M.2 2280 M-Key x 1 (PCIe 4.0 [x4]/SATA), M.2 3052 B-Key x 1, M.2 2230 E-Key x 1 ● DC 9~36V input * Heat spreader and fan-equipped heat sink sold separately GENE-MTH6-FAN: Fan-equipped heat sink GENE-MTH6-HSP: Heat spreader * Memory, storage, and OS are sold separately.