We have released a catalog for ultra-small diameter super hard discharge machining electrodes with a minimum diameter of φ0.01. These electrodes are used for discharge machining. Unlike electrodes made of copper or copper tungsten, they are made of cemented carbide. Super hard carbide electrodes are used when drilling finer holes straight due to their high hardness.

This is a carbide electrode material with a minimum diameter of φ0.01, used for electrical discharge machining. A high-hardness carbide electrode is used when drilling straighter, narrower holes.

This is a micro-diameter carbide electrode for electrical discharge machining from Sanwa Creation. Although it is an electrode for electrical discharge machining, it is made of carbide alloy rather than copper or copper tungsten. It is rare for carbide alloy to be used as electrode material, but there are cases where carbide electrodes with high hardness are employed when drilling finer holes straight. ■ Material: Carbide alloy ■ Specifications: Minimum diameter φ0.01 ■ Step length: 2 mm ■ Outer diameter precision: ±0.001 mm ■ Surface roughness: Ra0.2 µm ■ Shaft dimensions φ2 x 50L (standard) *Dimensions can be custom-made. Please feel free to consult with us.

• Other consumables

Industry top class, ultra-fine pin gauges thinner than a hair! Manufactured from a minimum diameter of φ0.01 millimeters.

Industry-leading, ultra-fine pin gauges that are thinner than a hair! We manufacture from a minimum diameter of φ0.01 millimeters! They are used for measuring the inner diameter of high-precision ultra-small holes and as master gauges for calibrating measuring instruments. Additionally, they can also be used as punch pins for small diameter hole punching or as electrode materials for electrical discharge machining. They are utilized in industries such as automotive parts, watch parts, electronic components, and semiconductor-related components. We offer "integrated type" and "holder (handle) type" options. Calibration certificates and traceability diagrams can be issued as needed. If you specify the desired dimensional standards and precision, we will provide a quote. *For more details about the products, please refer to the materials. Feel free to contact us with any inquiries.

• Other measurement, recording and measuring instruments

This is an electrode for discharge machining! Long tapers and R shapes can also be added! It can process small diameters with reduced vibration accuracy. Material: copper, copper tungsten, etc.

We would like to introduce the discharge machining electrodes handled by Sanwa Creation Co., Ltd. We have a proven track record in manufacturing with tough pitch copper, copper tungsten, etc., and we can produce not only round bar electrodes but also long tapers and R shapes. Since they are manufactured through grinding processes, there is an advantage in being able to process smaller diameters with reduced runout precision compared to electrodes made through lathe processing. 【Features】 ■ Capable of producing not only round bar electrodes but also long tapers and R shapes ■ Able to process smaller diameters with reduced runout precision *For more details, please refer to the related links or feel free to contact us.

• Electric discharge machine
• Other metal materials

To customers considering the introduction of vehicle detection sensors for parking lot construction, design, and management: Are you facing any issues with the challenges you currently have or selecting the right sensors for parking lot management? Hotron offers free materials that explain how to utilize vehicle detection sensors and the benefits of their introduction! ▽ Here is the lineup of materials ◉ Basic Guide to Vehicle Detection Sensors This guide focuses on the challenges and solutions in parking lot operations, introducing the overview of vehicle detection sensors. ◉ Key Points for Introducing Vehicle Detection Sensors This material discusses the benefits of introduction based on installation locations and specific challenges. ◉ Case Studies of Vehicle Detection Sensor Implementation This document introduces the challenges before implementation and the results after introduction. For more details, please download from our website and check it out. https://www.hotron.co.jp/download/

Variable Area Flowmeters Reliable quality designed to world standards When measuring the flow of high-pressure or high-temperature liquids and gases that are not suitable for plastic, our robust "glass tube variable area flowmeter (rotameter)" allows for more accurate flow measurement. It offers a wider flow range and is suitable for various liquids and gases! Contents ■ Glass tube variable area flowmeters / Metal tube variable area flowmeter lineup ■ Custom design solutions ■ Accessories & replacement parts ■ Support for technical documentation and compliance with various regulatory requirements ■ Services and support, etc.

"Tissue Tubes" are tubes with a capacity of 3.0ml and a rack lid locking feature. Each tube has a 2D code on the bottom, allowing you to use a 2D scanner to reflect the code in a PC database, enabling efficient management of sample information. Additionally, by using our dedicated rack that holds 24 tubes, you can read the 2D codes on the bottom of the tubes in bulk. 【Features】 - The inner diameter at the mouth is wide at 13.4mm, the height is low at 25.9mm, and the inner bottom is flat, making it easy to insert and remove samples. - Particularly suitable for samples of tissue pieces/cell pieces ranging from 5mm to 7mm. - Using our dedicated rack that holds 24 tubes allows for bulk reading of the 2D codes on the bottom of the tubes. - Compatible with automatic machines due to its SBS format. *For more details, please download the PDF or feel free to contact us.

Hotron, which manufactures and sells sensors, provides bed exit sensors for hospitals, nursing, and care facilities. Hotron offers easy-to-understand video guidance on how to use the bed exit sensors wirelessly and how to set up device connections! ▼ Video Manual (YouTube) https://www.youtube.com/playlist?list=PLNVA4mTrZDqtJa6MfFRZQxwtfCSnAfxVy 【Bed Exit Sensors】 ○ Non-contact infrared sensor, simply place it - Pole-kun HB-H1 ○ Mat sensor, foldable thin mat - Mat-kun HB-UST ○ Body movement call - Ugo-kun HB-TV3 ○ Body movement call for wheelchairs - Ayumi-chan HB-WTV3 【Options】 ○ Nurse call linked wireless set - Wireless set (transmitter/receiver) HB-RS/HB-RJ ◎ For more information about the products, please contact us or download the catalog.

● To determine the sealing and waterproofing of sealed products based on pressure changes, it is not necessary to conduct tests that involve spraying water on the product or immersing it in water. ● Once the product is placed in a dedicated fixture within the inspection device, waterproofing can be quantitatively confirmed through automatic measurement. ● The target product size is W 300 × D 210 × H 100 mm or smaller. ● The target products include automotive cameras, smartphones, ECUs, small motors, and other packaging containers, and are effective for any products that require confirmation of sealing, waterproofing, and airtightness. ● For product specifications and details, please contact us.