We are currently publishing a catalog of ultra-small diameter pin gauges with a minimum diameter of φ0.01 millimeters. These are top-class in the industry, thinner than a hair! We manufacture from a minimum diameter of φ0.01 millimeters. Applications: master pin gauges, punch pins for small hole punching, and electrode materials for electrical discharge machining, etc.

Industry top class, ultra-fine pin gauges thinner than a hair! Manufactured from a minimum diameter of φ0.01 millimeters.

Industry-leading, ultra-fine pin gauges that are thinner than a hair! We manufacture from a minimum diameter of φ0.01 millimeters! They are used for measuring the inner diameter of high-precision ultra-small holes and as master gauges for calibrating measuring instruments. Additionally, they can also be used as punch pins for small diameter hole punching or as electrode materials for electrical discharge machining. They are utilized in industries such as automotive parts, watch parts, electronic components, and semiconductor-related components. We offer "integrated type" and "holder (handle) type" options. Calibration certificates and traceability diagrams can be issued as needed. If you specify the desired dimensional standards and precision, we will provide a quote. *For more details about the products, please refer to the materials. Feel free to contact us with any inquiries.

• Other measurement, recording and measuring instruments

We would like to introduce the features of ceramic pin gauges that are not found in carbide or steel pin gauges.

Standard Type Diameter: φ0.1 to φ6 Tolerance: ±0.3μm to ±1μm Roundness: 0.3μ to 0.8μ Surface Roughness: Ra0.05 to Ra0.2 Ultra Small Diameter Type Diameter: φ0.03 to φ0.99 Tolerance: ±1μm Material: Zirconia Ceramics Applications - For measuring the inner diameter of small holes - Master pin gauge for calibrating measuring instruments, etc. Used in various applications as small diameter pins.

• Inspection fixture

This is a carbide pin gauge that enables accurate inner diameter measurement on a micron order.

The "High-Precision Small Diameter Pin Gauge for Inner Diameter Measurement" is a carbide pin gauge that enables accurate inner diameter measurements on the micron order. It allows for precise measurements in the micron range for inner diameter measurement. Although there is an additional cost, we also issue a "Calibration Certificate" and a "Traceability System Diagram." 【Features】 - Ultra-precision can be used as a master pin gauge - Custom sizes can be made with an outer diameter (φD) of 0.1 to 10mm and a total length of 40 to 60mm - Individual orders can be made for φ6.001 to φ10.000 - Can also be manufactured in zirconia material Production can be done from a single piece. Conversely, we also offer set sales in units of several dozen to a hundred pieces. For more details, please contact us or download the catalog.

• Other measurement, recording and measuring instruments
• Other inspection equipment and devices

The time for celebration has come! The new production hall has started operations! While finishing work continues in other parts of the building, metal shavings are already being produced in the first machining center. Last Friday afternoon, employees and their families, along with companies involved in the construction, gathered to celebrate the achievements so far. Cold drinks, hot barbecue, and an ice cream stand were provided. During the celebration, many employees had the opportunity to tour the entire new building for the first time. Visitors were introduced to the new machines and improved logistics through guided tours of the production area. The new training room, the training center on the upper floor, and the latest conference room for customers were also unveiled. With this new building, Volkmann GmbH has secured an additional 4,500 square meters of production space. This expansion was very important, as the existing hall had already reached its limits due to the company's ongoing growth and increased production volume.

▶Issue: Before further processing the powder in the next stage (such as packaging machines), it is necessary to inspect for the presence of metal foreign objects using a metal detector. To achieve high sensitivity, the powder needs to be inspected through free fall, but due to low ceiling height and operational inconvenience, it is not possible to install the metal detector in the next stage. ▶Solution: The CEIA metal detector will be installed under a Volkmann vacuum conveyor and on a Volkmann mobile lift. The height-adjustable lift will allow the product discharge outlet of the metal detector to be adjusted to the appropriate height for the mobile container. Additionally, the vacuum conveyor can be lowered to a height that allows the mobile lift to pass through doors. The powder will be transported, for example, from an IBC container to the mobile lift and then to the metal detector via vacuum transfer. Metal foreign objects will be sorted and collected in a separate bottle. The inspected powder will be collected in a mobile container. Another vacuum conveyor is installed for the next stage, such as the packaging machine, from which the powder will be drawn from this container. Inspection and separation of metal parts can be conducted very close to the next stage, and it is also possible in more distant production areas.

The video shows that there is a tank at the bottom of the vacuum conveyor, and steam is constantly being released (in a simulated manner). If no measures are taken, the steam will enter the inside of the vacuum conveyor, condense into water droplets, and cause powder adhesion. Both our company and our customers have been troubled by such installations. This time, with the special module jointly developed with Minato Engineering Co., Ltd., we have succeeded in blocking the rising steam. From around the middle of the video, you can see that this function is turned on. You should be able to understand that the steam that was previously rising has disappeared. As a result, it has become possible to install equipment in a steam atmosphere, which was previously difficult to do, with peace of mind.

【Period: Ongoing until October 31, 2025】 For orders of 10 pieces or more: Dry T-shirt 1 piece @1,800 yen (tax included) Dry Polo Shirt 1 piece @2,300 yen (tax included) (Includes garment and one print location) For sizes 3L and above, an additional 550 yen An additional 550 yen for each additional print location Design and data production fees are required separately. (No fee if submitting complete data) We accept orders for various purposes such as events, teams, goods, souvenirs, and gifts, from one piece to mass production. We also have many other garments not listed. Please feel free to inquire.

September 1st to October 31st For events, exhibitions, and store promotions! A useful tote bag that makes a great gift Would you like to create a popular tote bag for promotional goods? We offer three convenient sizes. For more details, please contact us.