Remove magnetic foreign substances from slurry! Magnet drum type magnetic separator 'MAGPICER / Wet Type'

【Solid-liquid separation / Separation of magnetic and non-magnetic materials / Moisture content adjustment / Foreign matter removal】 ◇ Drum-type "magnetic separator" capable of continuous magnetic selection processing.

- "Dehydration mechanism" + "Automatic discharge mechanism" + "Continuous magnetic separation processing" (Increase production efficiency without stopping the manufacturing line!) 1. Functions ◆ Liquid separation ◆ Magnetic/non-magnetic separation ◆ Moisture content adjustment (concentration control) ◆ Removal of magnetic foreign substances 2. Benefits ◆ Increased production efficiency for the next process through dehydration/moisture content adjustment of recovered materials ◆ No filters or consumables required ◆ Achieves high magnetic force of 0.9 Tesla (excluding some large models) over a wide area of the magnet drum surface with permanent magnets, capturing difficult-to-separate magnetic and non-magnetic substances in the liquid ◆ Continuous magnetic separation processing without stopping the manufacturing process due to the automatic discharge mechanism for magnetic substances adsorbed on the magnet drum

• Separation device
• Solid-liquid separation filter
• Filtration Equipment

Understand the 'sludge recovery methods for coolant fluids' for grinding and cutting processes! Numerous examples such as 'significantly reduced cleaning and maintenance frequency / achieved cost reduction'!

The high-dimensional magnet array "FINE MAG" removes fine sludge and continues to demonstrate excellent dewatering and degreasing performance over a long period. <Voices of 14 Site Managers> 1. Maintenance-free, no liquid replacement for 7 years 2. Zero degreasing in shaving processing, contributing to extended pump life 3. Successfully achieved significant cuts in maintenance costs 4. Contributed to the recovery of particulate sludge through secondary filtration 5. Significant reduction in sludge accumulation in the coolant tank of machining centers 6. The lifespan of cutting fluid in machining centers for castings has doubled 7. Quality improvement through ultra-hard sludge recovery 8. Greatly reduced costs and time loss in cleaning 9. Stable quality that maintains the obvious. Over 30 years of trust and results 10. Grinding sludge sold to scrap dealers as valuable material 11. Achieved high dewatering performance of sludge and high durability of rollers 12. Significant reduction in maintenance such as coolant liquid replacement and cleaning 13. Reduced operational costs due to increased lifespan of the magnetic drum 14. Recovery rate is three times that of conventional machines, and cleaning frequency is one-third of what it used to be.

• Separation device
• Solid-liquid separation filter
• Filtration Equipment

We are pleased to announce that Tokyo Machine Works Co., Ltd. will be exhibiting at the "INNOVATION EXPO 2025" to be held at Tokyo Big Sight from September 10 (Wednesday) to September 12 (Friday), 2025. 【Exhibited Equipment】 - 1-ton portable autonomous mobile robot (AMR) - 2-ton portable unmanned transport vehicle (AGV) - Shutter-equipped unmanned transport vehicle - Autonomous cleaning robot, etc. 【Booth Number】 - 6-405 You will have the opportunity to see each machine up close, including demonstrations that link the equipment together. We sincerely look forward to your visit during this event. Please note that pre-registration (free of charge) is required to attend the exhibition, so we kindly ask you to register using the link below. https://www.logistech-online.com/jp/registration.php?exhibitor=EX000072 If you would like an invitation, please request it through our contact form.

Contec has added a BTO menu for the Windows 11-based embedded OS - Windows 11 IoT Enterprise LTSC 2024 to its industrial computer "MR4310 series" and has started accepting orders.

Contec has developed the Ethernet wireless converters "RP-WAH-SR12" and "RP-WAH-SR22," which utilize 920MHz sub-gigahertz wireless (IEEE 802.11ah) to enable Ethernet communication wirelessly even at distances of up to 1 km. Sales began on August 21, 2025. The new products are compact IEEE 802.11ah compliant wireless LAN converters that can be installed in various locations. The new Wi-Fi standard "IEEE 802.11ah," which utilizes sub-gigahertz wireless communication, became available in Japan in September 2022. It operates in the 920MHz band without the need for a license and can be used outdoors. Compared to conventional 920MHz wireless communication, it enables high-speed communication and the establishment of long-distance networks, making it expected to be utilized in large factories, plants, and farms. The new Ethernet wireless converters are designed to be lightweight and compact, allowing for installation in various locations such as walls and DIN rails with the included mounting brackets. Additionally, they support external antennas, enabling the construction of flexible wireless LAN systems.

Contec has developed a super compact business computer equipped with the Intel(R) Core(TM) Ultra processor (Series 1), and has started accepting orders for the business computer "LPC-500 Series" (hereinafter referred to as the new product) from August 28, 2025. The new product is a super compact business computer featuring the Intel(R) Core(TM) Ultra 5 processor 125U (Series 1, Meteor Lake-U). It is equipped with "Intel(R) AI Boost," which integrates an NPU into the CPU, allowing for the execution of AI functions such as image recognition and voice processing at high speed and low power consumption while reducing the load on the CPU and GPU. With ultra-compact dimensions of 150(W) × 150(D) × 33(H) mm, it comes with a vertical stand and VESA mounting brackets, enabling installation in tight spaces on desks, behind displays, or inside equipment without restriction. It adopts a BTO (Build to Order) method that allows customers to freely choose memory capacity, storage, OS, and more, enabling the order of a PC with specifications optimal for their needs and budget starting from just one unit.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed without causing any thermal impact on the base material. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.