An article about the ultrasonic cleaning device was published in the December issue of 【Sonosys】 Transistor Technology.

Leave the latest ultrasonic cleaning to Sonosys.

Ultrasonic Cleaning Spray Nozzle For non-contact single substrate cleaning, we offer a megasonic nozzle with either a single nozzle, dual nozzle, or triple channel, and any combination of frequencies ranging from 600kHz to a maximum of 9MHz. The transducer of this megasonic nozzle generates megasonics and sends them through a fluid (such as pure water) to clean the surface of the substrate. Megasonic Immersion Transducer This is a megasonic immersion transducer with frequencies of 400kHz, 600kHz, 1MHz, and 2MHz. A sealed transducer made of stainless steel or plastic (e.g., PP, PVDF, or PFA) is installed at the bottom or side of an existing tank. In addition to standard systems for substrate sizes of 4", 6", and 8", custom immersion transducers are also available. The highly adaptable configuration allows the megasonic system to be used in bath-tank cleaning processes, improving cost-effectiveness. Frequencies available are 400kHz, 600kHz, 1MHz, and 2MHz.

• Ultrasonic Oscillator
• Other cleaning machines
• Ultrasonic Cleaner

A collaborative product of Rehila's nozzle technology and Sonosys's ultrasonic technology.

Particles (droplets) formed by the ultrasonic spray nozzle are broken up by the vibrations of the piezo element. In other words, unlike pressurized systems, the particles do not have speed. As a result, they either fall naturally or float due to the influence of the wind. Therefore, carrier air is used to transport the formed particles for application.

• Ultrasonic Oscillator
• nozzle
• Coating Machine

Features: ● Equipped with Intel Core Ultra 5 125H/Ultra 7 155H・155U ● DDR5 5600MHz SO-DIMM x2 slots (up to 96GB) (sold separately) ● LVDS x1, eDP x1, DP x1, HDMI x1 ● LAN x3, SATA 6Gb/s x1, 8-bit GPIO ● USB 3.2 Gen2 x2, USB 2.0 x4 ● M.2 2280 M-Key x1 (PCIe 4.0 [x4]/SATA), M.2 3052 B-Key x1, M.2 2230 E-Key x1 ● DC 9~36V input * Heat spreader and fan-equipped heat sink sold separately GENE-MTH6-FAN: Fan-equipped heat sink GENE-MTH6-HSP: Heat spreader * Memory, storage, and OS are sold separately.

Features: ● Equipped with Intel Core i3-N305 / Processor N97 ● DDR5 4800MHz SO-DIMM x1 slot (up to 16GB) (sold separately) ● LVDS Dual Channel 18/24 bit x1, VGA x1, HDMI x1 ● Intel 2.5GbE x2, SATA 6Gb/s x1, 8bit GPIO ● USB 3.2 Gen2 x2, USB 2.0 x4 ● Full size mPCIe/mSATA ● M.2 3052 B-Key x1, M.2 2230 E-Key x1 ● DC 9~36V input * Heatsink included * Memory, storage, and OS sold separately

Features: ● Equipped with Intel Core Ultra 5 225H/7 255H (Arrow Lake) ● DDR5 6400MHz dual-channel SODIMM x 2 (up to 96GB) (sold separately) ● LVDS x 1, eDP x 1, HDMI x 1 ● LAN x 3, SATA 6Gb/s x 1, 8-bit GPIO ● USB 3.2 Gen2 x 2, USB 2.0 x 4 ● M.2 2280 M-key x 1, M.2 3052 B-key x 1, M.2 2230 E-key x 1 ● Supports DC input of 9 to 36V ● Fan-equipped heat sink available separately GENE-MTH6-FAN: Heat sink with fan GENE-MTH6-HSP: Heat spreader (requires heat dissipation in the enclosure) * This model does not include OS/memory/storage.

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four ways: left, center, right, with 4 spots and 12 spots settings. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor modes with a single model. 【Recommended for such places!】 ☑ Entrances facing busy corridors ☑ Counters or signs near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.

Japan is among the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of significant earthquakes occurring. For the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake measures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" ◎ For more details, please download the materials or contact us.