Chemical Industry Daily News, October 30, 2024 Edition, Advertising Announcement

The liquid contact materials have been upgraded to SUS, PTFE, and FFKM, allowing for a wider range of compatible liquids compared to our previous model (CHD-20A)! Suitable for solvent transfer in areas where open flames are prohibited.

**CHD1 Series** CHD1-20ASUS (for solvents) CHD1-20ASUS-V (for solvents / with ball valve) CHD1-20ASUS-N (for solvents / with gun nozzle) ● Oil-free air motor type ● Lightweight and compact body ● Inexpensive **Features** ● Safe and secure due to air drive ● Dedicated for JIS standard 200L closed drums (large cap G2) ● For low viscosity solvents (below 100cP) ● Discharge rate of 20L/min (with nozzle) ● Discharge only **Applications** Used not only in metal plating factories and semiconductor manufacturing but also in chemical plants, pharmaceutical warehouses, and other sites. Additionally, it is used in water treatment, pharmaceuticals, laboratories, schools, and hospitals. For areas with high volatility, high flammability, explosion-proof zones, and no open flames, please use the air-operated model (CHD1-20ASUS-N). **Suitable for use in the following areas!** ■ Lithium batteries (secondary batteries) ■ Dyeing, semiconductor, disinfectant manufacturing, automotive, and electrical appliance factories ■ Surface treatment in metal plating factories ■ New energy sector **Compatible with the following liquids!** ■ Alcohol ■ Thinner ■ Acetone ■ Methanol ■ MEK, etc.

• Other pumps

You can easily tell if the liquid in the drum is full or empty with just one touch!

"Sensor-type Liquid Level Gauge for 200L Drums" GDB-CF / For Full GDB-CL / For Empty (For low-viscosity oil, kerosene, diesel, wastewater, and waste liquids) *Not suitable for solvents or chemicals that can damage materials. "Benefits" ● You can check whether the liquid inside the drum is full or empty without tilting the drum or peering inside, using each product. ● You can confirm when the drum is full or empty during liquid transfer. ● The sensor can be adjusted according to the desired liquid level line using a position adjustment adapter. ● Lightweight and affordable. ● Enables management of liquids inside the drum. ● Usable liquids include low-viscosity oil, kerosene, diesel, water, wastewater, and waste liquids. *Not suitable for solvents or chemicals that can damage materials. "Features" ● Dedicated to JIS standard 200L drums. *Can be attached to the small plug of the drum (G3/4). ● Confirmation work can be done within 3 minutes from startup (automatic stop after 3 minutes). ● The full and empty indicators light up in red and alert with a 15-second buzzer. ● Uses four AA batteries (approximately 1,000 uses). ● This product is for indoor use only. *Do not use outdoors.

• Other pumps

A liquid level gauge that can be connected to an air pump to check whether the liquid in a JIS standard 200L drum is full or empty.

"Sensor-type Liquid Level Gauge for 200L Drum" GDA-HH / For Full (Oil, Kerosene, Diesel, Solvent) *Not suitable for corrosive substances like chemicals GDA-HL / For Empty (Oil, Kerosene, Diesel, Solvent) *Not suitable for corrosive substances like chemicals "Benefits" ● You can check whether the liquid inside the drum is full or empty without tilting or peering into the drum. ● You can confirm when the drum is full or empty during liquid transfer. ● The sensor can be adjusted according to the desired liquid level line using a position adjustment adapter. ● Lightweight and affordable. ● Enables management of liquids inside the drum. ● Suitable liquids include low-viscosity oil, kerosene, diesel, and solvents. *Not suitable for corrosive substances like chemicals. "Features" ● Specifically designed for JIS standard 200L drums. *Can be attached to the small plug (G3/4) of the drum. ● Since it is air-driven, the liquid level gauge can be used in areas where open flames are prohibited. ● Can be used in combination with air-driven handheld pumps (ACH, AMVH, AMH1 series). ● After the pump stops, only GDA-HL can discharge additionally. The pump operates while pulling the dispensing ring. ● This product is for indoor use only. *Do not use outdoors.

• Liquid level control/level switch

Non-contact detection of liquid in the container! A liquid level gauge that displays the remaining amount on an LCD panel. With the wireless type and using a parent unit, you can manage the remaining amount in real-time with a dedicated PC application!

"JIS Standard 200L Drum, Resin Drum, IBC Container (Tank) Compatible Laser Liquid Level Gauge Standard/Wireless/Parent Unit/Repeater (GDE-CL/GDE-CLW/GDE-W/GDE-R)" GDE-CL / Standard Type, No Wireless, Battery Operated GDE-CLW / Wireless Type, AC100V GDE-W / Wireless Type Dedicated Parent Unit, AC100V GDE-R / Wireless Type Dedicated Repeater, AC100V (Oil, Kerosene, Diesel) *Solvents and chemicals are not compatible due to laser sensing considerations "Features" ● Measurement in various containers such as drums (display in %, L, mm) Can also be used for other containers if the maximum liquid height is set (display in % and mm / L display not available) * % indicates the remaining liquid ratio from the total, L (liters) indicates the remaining liquid volume, mm indicates the remaining height from the bottom layer relative to the total liquid * Small plug (G3/4) can be attached to the drum ● Select units from "%, L, mm" and display on the LCD panel (JIS Standard 200L Drum) ● Set the height at which a sound will be emitted during "%" measurement ● Sends liquid volume data to the USB-connected parent unit every 30 seconds ● Can manage up to 15 units in real-time within a dedicated PC application ※Please note that this is available for sale in Japan only.

• Liquid level control/level switch

We will be exhibiting at the "New Manufacturing and New Services Exhibition for Small and Medium Enterprises" from December 16 (Tuesday) to 18 (Thursday), 2025. Please feel free to stop by our booth. We look forward to meeting everyone.

Would you like to have that product certified as "Accredited calibration"? Our company conducts calibration of pressure category "leak gauges" as a registered business under the Measurement Law Calibration Business Registration System (JCSS). Additionally, we are accredited by the Japan Accreditation Board (JAB) as a calibration organization compliant with the international standard ISO/IEC 17025, and we perform calibration of "flow rate," issuing calibration certificates with symbols. Fukuda is an accredited calibration organization compliant with international MRA.

[To the owners of parking lots and parking lot construction companies] "I'm worried about the possibility of colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those facing sidewalks or roadways are particularly prone to dangerous incidents such as collisions with pedestrians or between vehicles. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures at various sites and alerts the surroundings with LED lights and buzzers. The system consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *When using the exit warning system, we kindly ask customers to arrange for the switching power supply (24V), LED rotating light, control panel, circuit breaker, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. [Contents Included] ○ Vehicle Exit Warning System Configuration ○ Comparison Table of Exit Warning Sensors ○ Four Modes ○ Wide Range of Applications ○ Customer Feedback ○ Appearance Diagram / Specifications ◎ For more details, please contact us or download the catalog.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.

● The production time for casting prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly creating sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be created in a single molding process. This allows for the verification of multiple types in a short period.