We will exhibit at the 25th International Measurement and Measurement Exhibition.

The accuracy is an impressive ±0.1% R.S. with a maximum flow rate of 7500 L/min! A high-precision flow meter that is also used as a secondary standard!

The "OMG Series" screw meter volumetric flow meter has a structure that allows fluids to flow linearly, resulting in significantly lower pressure loss compared to conventional gear-type meters, and it also reduces the load inside the flow meter. The measurement accuracy is very high at ±0.1 RS, making it suitable for use as a flow reference instrument. It can measure a wide range of fluids, including high-viscosity liquids such as adhesives, sealants, PVC, and polyols, as well as low-viscosity fuels like gasoline, diesel, and kerosene. Additionally, with a variety of pickup sensors, it can accommodate a temperature range of up to -40 to 200°C. 【Do you have any of these concerns?】 - The data during high-temperature tests is poor, making accurate measurement difficult. - It breaks down quickly within 3 to 5 years due to high temperatures, necessitating replacement. - I want to measure high-viscosity fluids such as grease, adhesives, and sealants.

• Hydraulic Equipment
• Other physicochemical equipment
• Flow Meter

The high-pressure screw meter OMH is a high-precision volumetric flow meter designed for high pressure, featuring a spiral gear type. It has low pressure loss and is suitable for high temperatures.

This is a high-pressure flow meter compatible with MAX 42 MPa. (*For 63 MPa compatibility, please contact us for details.) Connections include SAE, DIN, G (BSPP), and others. Compared to conventional gear meters, it has lower pressure loss, which can help reduce electricity costs for motors and other equipment. It is particularly used for performance testing of high-pressure hydraulic equipment and for cylinder position detection in tunnel boring machines. It can accommodate a wide range of liquids, from high-viscosity liquids such as adhesives, sealants, PVC, inks, and polyols to low-viscosity liquids like gasoline and diesel. There are two types of traceability options: (1) ISO/IEC 17025 calibration (equivalent to JCSS) (This does not include a system diagram or calibration certificate.) (2) Attach documents such as a report, calibration certificate, and system diagram. *For details, please contact us. Calibration is performed at approximately 5 mm²/s (equivalent to diesel oil).

• Hydraulic Equipment
• Flow Meter
• Flow Control

The screw meter OME is a helical gear type volumetric flow meter, lightweight and compact, with a wide measurement range and high precision.

OME is a helical gear type volumetric flow meter, a screw meter. It has an aluminum body, featuring a lightweight and compact design. The measurement accuracy is ±0.3% RS (1:150), providing high precision. The 1:10 range (from 1/10 of F.S.) has linearity of ±0.1%. It also supports calibration in accordance with ISO/IEC 17025 ILAC MRA (JCSS mutual recognition).

• Mixer/agitator

It is a digital flow display with a high-speed response of 1 msec or less.

The FM series digital flow meter is a pulse input type flow meter. The analog output update time is a high-speed D/A conversion of 1 msec or more.

• Piping Materials
• Flow Control
• Display

The turbine flow meter can utilize its measurement range better with lower viscosity.

The impeller rotates due to the pressure of the fluid, with the rotation speed proportional to the cumulative flow rate and the rotational velocity proportional to the instantaneous flow rate. A non-contact pickup sensor detects the movement of the blades and outputs pulses. While gear flow meters have a wider measurement range with higher viscosity, turbine flow meters can utilize their measurement range better with lower viscosity.

• Flow Meter

The turbine flow meter can maximize its measurement range with lower viscosity.

The impeller rotates due to the pressure of the fluid, with the rotation speed proportional to the cumulative flow rate and the rotational velocity proportional to the instantaneous flow rate. A non-contact pickup sensor detects the movement of the blades and outputs pulses. In contrast to gear flow meters, which have a wider measurement range with higher viscosity, turbine flow meters can maximize their measurement range with lower viscosity.

• Flow Meter

On November 6th (Thursday) to 7th (Friday), 2025, we held the "Human Body Day 2025" at the NAC Image Technology Akasaka Multi-Purpose Space. We have uploaded videos of the highlights from each company and the presentations that took place on the day to our website. We encourage you to take a look. ---[Report on Human Body Day 2025 is here]------------------- https://info.nacinc.jp/jintaiday2025-report ------------------------------------------------------------------------- On the day of the event, participants were able to experience a wide range of products in a hands-on session format, including motion capture, force plates, eye tracking, and human body analysis software. We received numerous comments from attendees expressing high satisfaction, saying, "It was great to gain various information all at once," which makes us very happy. NAC Image Technology will continue to provide "valuable products to our customers." We hope you will join us for our next event as well.

The date for the "Tokai Area Electrical and Electronic WEB Technology Seminar" for the 2026 fiscal year has been decided. Registration has started, so if you are interested, please apply. Multiple participants from one company are allowed, so please make use of this opportunity to acquire basic knowledge. 【April】Basic Knowledge of Resistors 【May】Technical Course on Capacitors 【June】Basics of Motors and How to Choose the Optimal Driver 【July】Fundamentals of IC Socket and Connector Selection 【September】Basics of Magnets 【October】Failure Phenomena of Chip Resistors and Their Countermeasures 【November】Temperature Protection Design Using Thermal Fuses

NDT Mart & Rental Co., Ltd. began selling its new product, the handheld magnet "YokeLite-100V," on December 25, 2025. ◆ Handheld Magnet "YokeLite-100V" The YokeLite-100V is an AC handheld magnet (gap-type magnetizer) used for magnetic particle testing (MT). With a compact design weighing approximately 2.4 kg, it is easy to handle and allows for efficient non-destructive testing work on-site. It generates a powerful alternating magnetic field, supporting the detection of defects such as cracks in welds and on metal surfaces. It features a variable yoke structure, enabling flexible adaptation to various inspection targets, including curved surfaces, corners, and fillet welds. It ensures a lifting power of over 4.5 kg, providing sufficient magnetization capability required for magnetic particle testing. Additionally, by equipping optional UV lights or white lights, it can accommodate a wide range of inspection methods, including fluorescent magnetic particle testing and visual inspections, offering excellent cost performance. This handheld magnet is useful for defect inspection and quality control in the fields of manufacturing, plant equipment, and welding inspection. It combines lightweight design with high inspection performance, contributing to improved work efficiency.

NDT Mart & Rental Co., Ltd. began selling its new electromagnetic ultrasonic thickness gauge, 'EMAT WIFI', on January 19, 2026. ◆ Electromagnetic Ultrasonic Thickness Gauge 'EMAT WIFI' The 'EMAT WIFI' is a thickness gauge that uses the electromagnetic ultrasonic (EMAT) method, which does not require a couplant (contact medium). Unlike conventional ultrasonic thickness gauges (UT), there is no need to apply a couplant; thickness measurements can be taken simply by placing the probe on the measurement target, making it ideal for beginners and screening in large-scale sites. It can measure materials with paint, scale, thick linings, and slight surface roughness, significantly reducing the hassle of pre-treatment. Additionally, it is equipped with WiFi communication capabilities, allowing for the confirmation and management of measurement data and waveforms in conjunction with smartphones and tablets. This facilitates smooth sharing of measurement results and data management on-site. It is optimal for measuring wall thickness and conducting corrosion inspections of plant equipment, piping, tanks, and steel structures. It contributes to the efficiency and reliability of thickness measurements in the field of non-destructive testing (NDT), such as maintenance inspections and equipment diagnostics.

NDT Mart & Rental Co., Ltd. began sales of its new dual thickness gauge, the 'CT3500', on January 28, 2026. ◆ Dual Thickness Gauge 'CT3500' The 'CT3500' is a portable thickness gauge that supports a wide range of coating measurements from thin films to thick films. It employs a dual measurement method using electromagnetic and eddy current techniques, allowing for automatic differentiation between ferrous and non-ferrous substrates to measure coating thickness. The measurement range accommodates up to 3,500μm, making it suitable for measuring coatings from general painting to heavy anti-corrosion coatings and linings. With a measurement speed of approximately 0.2 seconds, it allows for efficient measurements even in inspection tasks that require multiple points. It is not only compact and easy to carry, but its display features an inclined design that is easy to see from both above and the front. Additionally, the upside-down display and background color (white/black) switching enhance visibility in dark, narrow, and outdoor environments, making it suitable for quality control within factories as well as for equipment inspections and painting checks in outdoor settings. It can be utilized for a wide range of applications, including painting management of bridges and steel structures, anti-corrosion coating measurements for pipes and tanks, and quality control in manufacturing sites. The 'CT3500' is a high-performance portable thickness gauge that provides stable measurements from thin to thick films, designed for field use.