Toyota Kikan Year-End and New Year Business Hours Notice.

Dramatically change the oil mist environment in manufacturing sites! Introducing the mist collector.

The "Mistrainer" is a product that maintains a high removal rate for one year due to its unique core-lessing filter. The mist that is suctioned is introduced into a cylindrical special filter (3 to 8 pieces). As the collected oil is discharged to the bottom, a filtration space is created at the top of the filter, maintaining high removal capability and processing air volume. The collected oil can also be discharged and reused. 【Features】 ■ Achieves high removal rate ■ Filter replacement once a year ■ ECO-friendly cost reduction *For more details, please refer to the PDF document or feel free to contact us.

• Oil Mist Collector

"SPACECOOL" blocks heat from sunlight and the atmosphere with zero energy.

[Limited to the Chubu Area] We are currently conducting trial installations! It blocks heat from sunlight and the atmosphere, reducing heat absorption and providing comfortable coolness. "SPACECOOL" is a material that lowers temperatures below that of the outside air with zero energy. Our company offers environmental improvement proposals utilizing this material, and we are conducting on-site installations limited to the Chubu area. *Areas include Mie, Aichi, Gifu, and parts of Shizuoka. SPACECOOL not only blocks heat from sunlight and the atmosphere and reduces heat absorption, but it also radiates heat into space, effectively discarding heat. In actual use in outdoor warehouses and tents, we have confirmed a temperature drop of approximately -10 degrees in perceived temperature.

• Other environmental analysis equipment

[Limited to the Chubu area] Trial installation is currently underway! It blocks heat from sunlight and the atmosphere, reducing heat absorption and providing comfortable coolness.

"SPACECOOL" is a material that lowers temperatures below that of the outside air with zero energy. Our company offers proposals for environmental improvement using this material, and we are conducting on-site installations limited to the Chubu area. *Areas include Mie, Aichi, Gifu, and parts of Shizuoka. SPACECOOL not only blocks heat from sunlight and the atmosphere to reduce heat absorption, but it also radiates heat into space to dispose of it. In actual use in outdoor warehouses and tents, we confirmed a temperature reduction of about -10 degrees in perceived temperature. It can be used for various applications, contributing to improved comfort and safety, as well as mitigating global warming. We also offer trial installations, so please feel free to contact us when needed. [Lineup] ■Film ■Membrane materials *For more details, please refer to the PDF document or feel free to contact us.

• others

If you're looking for environmentally friendly clean energy, heat pumps are the way to go.

A heat pump is a technology that gathers thermal energy from sources such as the air with low power consumption to generate and utilize a large amount of thermal energy. It is an energy-saving technology used in everyday appliances like air conditioners, refrigerators, and more recently, vending machines. By using a heat pump, it is possible to obtain more thermal energy than the electrical energy consumed, allowing for effective use of valuable energy. Additionally, it can significantly reduce CO2 emissions, contributing to the preservation of the global environment.

• Other energy equipment

[Simulation materials available] Significantly reduces power consumption and CO2! Mitsubishi Heavy Industries heat pump that uses air heat to boil water.

A heat pump is a mechanism that moves heat from a low-temperature area to a high-temperature area. In air conditioners equipped with heat pumps, heating is achieved by releasing heat collected from the outdoor air into the indoor space via a refrigerant, while cooling is done by releasing heat collected from the indoor air to the outdoor space. By adopting a two-stage compressor type "scroll rotary compressor" and an "intermediate pressure gas injection structure," significant improvements in performance and efficiency are realized. Additionally, we also handle a circulation system that maintains and heats up warmed water. 【Features】 ■ Dramatic improvement in operating performance under low outdoor temperature conditions ■ Hot water supply up to 90°C is possible even at an outdoor temperature of -25°C, with no reduction in capacity down to -7°C ■ Achieves a COP of 4.3 (in the intermediate period) with an inverter type in the 30kW class ■ Conducts high-efficiency energy-saving operation throughout the year *For more details, please refer to the external link page or feel free to contact us.

• Other pumps
• Special Pump

Are you having trouble inspecting motors that cannot be stopped? We can monitor them remotely without the need for workers to visit the site.

Are you having trouble inspecting motors that cannot be stopped? "Motor Predictive Maintenance IoT" is a system that utilizes IoT to continuously monitor the operating conditions of rotating equipment such as motors and pumps at a low cost. This product allows for remote monitoring via internet connection without the need for workers to physically visit the site. By connecting sensors to smartphones or tablets via Bluetooth and collecting data, it eliminates the need for a relay device (gateway) by utilizing the internet connection of the tablet. Developed by a pump manufacturer with expertise in the structure and failure causes of rotating equipment, this system can identify the causes of failures to some extent by frequency band. 【Features】 ■ Supports 24-hour operating motors ■ Enables predictive maintenance before breakdowns ■ Low installation and running costs ■ Safe and quick information gathering *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

Prevent on-site dangers such as "noise and vibration" that accompany workers! Shorten motor inspection time and detect abnormalities early with a simple monitoring system!

"Motor Predictive Maintenance IoT" is a system that utilizes IoT to continuously monitor the operating conditions of rotating equipment such as motors and pumps at a low cost. Inspection work in areas where "workers cannot enter" or "places that are dangerous when approached" can lead to personal accidents, so companies are advancing measures to address this issue. Our product allows for remote monitoring via internet connection without the need for workers to physically visit the site. Monitoring of vibration acceleration, vibration velocity, and temperature is possible, and vibrations in frequency bands up to 10,000 Hz can be measured over time. Sensors connect to smartphones or tablet devices via Bluetooth for data collection, and by utilizing the internet connection of the tablet device, a relay device (gateway) is unnecessary. Developed by a pump manufacturer knowledgeable about the structure and failure causes of rotating equipment, this system can identify the causes of failures to some extent by frequency band. [Features] ■ Predictive maintenance before failure occurs ■ Low installation and running costs ■ Safe and quick information gathering *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If you require a detailed technical explanation, please contact us.

The "Mechanical Stitch Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.