Elastic adhesive for flooring that excels in workability even in cold periods.

To follow the "movement" of the flooring, no lifting, cracking, or buckling! No need for underlayment or carpentry! A user-friendly adhesive that is easy to apply and has good dismantling properties!

Product Name: IB Bond 【Features】 ✓ Elastic adhesion prevents cracking and lifting ✓ No need for plywood or calking ✓ Easy to apply even in cold weather ✓ Can absorb unevenness with a special notched trowel ✓ Excellent disassembly properties, ideal for floor replacement Unlike traditional adhesives (urethane-based adhesives) that rigidly fix the movement of flooring materials, IB Bond "follows the movement" of the flooring, alleviating the stress that causes warping and lifting. IB Bond is a solvent-free modified silicone adhesive. There is no solvent odor typically associated with traditional adhesives. Being soft even in cold weather allows for quicker and easier application. * It reduces the burden on workers and can cut disassembly time by about 50% compared to traditional adhesives. * Please refer to the "Disassembly Comparison Video with Traditional Products" on our website.

• glue

Prevention of flooring cracks and uplift: No need for waste plywood or calp.

【Features】 ■ Can be directly applied to slab substrates ■ No need for backing material on the underside of the flooring due to elastic adhesive ■ Moderate elasticity that follows the expansion and contraction of the flooring, preventing cracking and lifting ■ Easy to apply even in cold weather ■ Solvent-free type that is environmentally friendly ■ Excellent dismantling properties compared to conventional rigid polyurethane adhesives, making it ideal for floor replacement For more details, please check the Iida Sangyo website. https://kenzai-orotex.jp/product/ibbond.php You can confirm the following items on the website: - Comparison of construction methods and compositions using conventional rigid types and elastic adhesives. - Videos showing that unevenness can be adjusted by holding with a notched trowel. - Results demonstrating flooring lifting tested in our own laboratory. - Installation videos are available for viewing (installation time: approximately 3 square meters, 2 minutes and 38 seconds). - Videos comparing dismantling properties with rigid adhesives (approximately 50% reduction) are available for viewing. - Product catalogs and installation manuals are available for free download, so please make use of them.

• glue

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

What is an Air Leak Tester? An "Air Leak Tester" is a device that pressurizes the inside (or outside) of a sealed workpiece with air and determines the presence of leaks based on pressure changes. When a master with no leaks and a workpiece with leaks are pressurized, the pressure on the workpiece side decreases, creating a pressure difference between the two. By measuring this pressure difference, the presence of leaks can be determined. Generally, differential pressure air leak testing is widely used, but Fukuda also offers products that utilize direct pressure leak testing and flow meters according to the leak rate, in addition to differential pressure leak testers. Since the air leak tester uses air as the measurement medium, it incurs no running costs and is environmentally friendly.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who wish to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. You can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520" depending on the application and installation location. 【Recommended for such places!】 ☑ Entrance facing a busy corridor ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passages ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing, contributing to energy-saving by minimizing wasteful power consumption ● Equipped with a light touch function, allowing the door to open and close just by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.

Japan is among the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of significant earthquakes occurring. For the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake measures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" ◎ For more details, please download the materials or contact us.