The year 2025 has begun! ~ With gratitude and challenges in our hearts this year as well ~ [Bethel Corporation]

No matter how difficult the case may be, we will respond with flexible thinking.

When asked what is the most important aspect of mold manufacturing, it is not an exaggeration to say that mold design is paramount. No matter how advanced the equipment is, how impressive the machining technology is, or how good the material selection is, if the design is haphazard, the mold may not function properly. Betel's mold design is guided by the motto "Always think," free from conventional concepts, and possesses the creativity to realize shapes that may seem impossible to manufacture. In the past, we have encountered many cases where we were told by other companies, "We were turned down..." or "No mold manufacturer could do it..." and we have brought to life several groundbreaking mold structures that defy common sense. Utilizing skilled techniques and the latest CAD systems, we respond to our customers' needs with flexible thinking. Please feel free to contact us with your requests.

• Plastic Mould

It is a chip product from Bethel with a long history of development.

This is a dental filling tip. It can be used for filling, applying medication, and coating. It has a wide variety of options and is the product with the most development achievements at our company. The bending of the tip is a special processing developed using our unique technology. We have received high praise not only from Japan but also from dental professionals overseas. Please feel free to consult us regarding product design and molding.

• Prototype Services

It's bright, so you can see well. Shining for peace of mind, better oral care.

"Picasso" is an innovative sponge brush developed to support oral care for patients with swallowing difficulties in the prevention of aspiration pneumonia. 【Main Features】 - Brightly illuminates the mouth with a high-luminance LED. - Easy to use with one hand, reducing stress during oral care!

• Prototype Services

We can provide proposals that envision commercialization from prototypes.

If you are considering the design and development of medical devices, start with prototyping using a 3D printer. You can trust us with prototyping and verification of elongated shapes and small items. First, we will ask about the intended use, the size of the model, and whether you have any drawings.

• 3D Printer

For easier use and higher quality products: BMC for medical device manufacturing.

At Betel, we handle design development and product design in-house. Our major strength lies in our ability to conduct design and design considerations that take into account all manufacturing processes from mold making to molding and assembly. *For more details, please download the PDF. Feel free to contact us for more information.*

• Prototype Services

Bethel is a specialist in manufacturing. We turn our customers' "I want it!" into reality.

Betel has all the necessary systems for manufacturing, including mold factories, molding factories, assembly factories, and clean rooms, so we can consistently handle everything from design and prototyping to mold design and production, mass production through molding, and assembly to finished products. If you entrust your concept to Betel, we will provide you with the desired product. Please feel free to contact us with your requests.

• Plastic Mould

Compact and high-performance! Offering Φ6 DC motors at a special price! Perfect for all precision equipment.

This is a super compact motor that achieves high performance while maintaining a compact design. It is ideal for devices with limited installation space and can be applied to a variety of uses. <Features> 1️⃣ Space-saving design with a compact size … Achieves further miniaturization compared to conventional products. It demonstrates its true value even in constrained installation environments. 2️⃣ Versatility without the need for customization … Capable of accommodating many applications in its standard specifications. It enables short delivery times, allowing for immediate integration into customer projects. 3️⃣ Active in diverse applications … Adopted in a wide range of fields such as medical devices, precision machinery, and robotics. It is especially suitable for areas that require lightweight and high-performance motors. <We address the following challenges> ■ Those looking for motors that can accommodate devices and equipment requiring miniaturization. ■ Those seeking high-performance motors that can be used immediately without customization. Experience the high level of technology packed into a small size.

• Brushless DC Motor

Introducing devices for measuring the thermal diffusivity of sheet-like and plate-like materials, as well as thermal evaluation devices for fiber orientation distribution!

Introducing Bethel's thermal property measurement devices. The "Thermo Wave Analyzer TA33/35" is a measurement device for the thermal diffusivity of sheet and plate materials, capable of measuring the thermal diffusivity of functional materials. The "Thermal Microscope TM" has been commercialized through joint development with the National Institute of Advanced Industrial Science and Technology's Measurement Standards Division, allowing for measurements in micro-regions and thin films. Additionally, we offer the "Thermal Imaging Scope TSI," which visualizes thermal conduction paths using infrared cameras and lasers, as well as the "Fiber Orientation Evaluation System TEFOD." 【Features of the Thermo Wave Analyzer TA33/35】 ■ High freedom of sample shape ■ Dynamic range from organic films to diamonds ■ Anisotropy evaluation through measurements in horizontal and vertical directions ■ Evaluation of defects and irregularities through distribution measurements *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

The time for celebration has come! The new production hall has started operations! While finishing work continues in other parts of the building, metal shavings are already being produced in the first machining center. Last Friday afternoon, employees and their families, along with companies involved in the construction, gathered to celebrate the achievements so far. Cold drinks, hot barbecue, and an ice cream stand were provided. During the celebration, many employees had the opportunity to tour the entire new building for the first time. Visitors were introduced to the new machines and improved logistics through guided tours of the production area. The new training room, the training center on the upper floor, and the latest conference room for customers were also unveiled. With this new building, Volkmann GmbH has secured an additional 4,500 square meters of production space. This expansion was very important, as the existing hall had already reached its limits due to the company's ongoing growth and increased production volume.

▶Issue: Before further processing the powder in the next stage (such as packaging machines), it is necessary to inspect for the presence of metal foreign objects using a metal detector. To achieve high sensitivity, the powder needs to be inspected through free fall, but due to low ceiling height and operational inconvenience, it is not possible to install the metal detector in the next stage. ▶Solution: The CEIA metal detector will be installed under a Volkmann vacuum conveyor and on a Volkmann mobile lift. The height-adjustable lift will allow the product discharge outlet of the metal detector to be adjusted to the appropriate height for the mobile container. Additionally, the vacuum conveyor can be lowered to a height that allows the mobile lift to pass through doors. The powder will be transported, for example, from an IBC container to the mobile lift and then to the metal detector via vacuum transfer. Metal foreign objects will be sorted and collected in a separate bottle. The inspected powder will be collected in a mobile container. Another vacuum conveyor is installed for the next stage, such as the packaging machine, from which the powder will be drawn from this container. Inspection and separation of metal parts can be conducted very close to the next stage, and it is also possible in more distant production areas.

The video shows that there is a tank at the bottom of the vacuum conveyor, and steam is constantly being released (in a simulated manner). If no measures are taken, the steam will enter the inside of the vacuum conveyor, condense into water droplets, and cause powder adhesion. Both our company and our customers have been troubled by such installations. This time, with the special module jointly developed with Minato Engineering Co., Ltd., we have succeeded in blocking the rising steam. From around the middle of the video, you can see that this function is turned on. You should be able to understand that the steam that was previously rising has disappeared. As a result, it has become possible to install equipment in a steam atmosphere, which was previously difficult to do, with peace of mind.

【Period: Ongoing until October 31, 2025】 For orders of 10 pieces or more: Dry T-shirt 1 piece @1,800 yen (tax included) Dry Polo Shirt 1 piece @2,300 yen (tax included) (Includes garment and one print location) For sizes 3L and above, an additional 550 yen An additional 550 yen for each additional print location Design and data production fees are required separately. (No fee if submitting complete data) We accept orders for various purposes such as events, teams, goods, souvenirs, and gifts, from one piece to mass production. We also have many other garments not listed. Please feel free to inquire.

September 1st to October 31st For events, exhibitions, and store promotions! A useful tote bag that makes a great gift Would you like to create a popular tote bag for promotional goods? We offer three convenient sizes. For more details, please contact us.