I went to the International Confectionery Fair - ISM & ProSweets 2025 for a visit!

The device is half the size, but its capacity is surprisingly double! Here’s why Russell Finex's vibrating screens are loved worldwide!

RUSSELL FINEX's vibrating screen offers: ☆ Capacity: It demonstrates more than double the capacity compared to spring-type vibrating screens. Therefore, with RUSSELL FINEX's vibrating screen, you can operate with one machine instead of two. ☆ Noise: No Noise, No Dance. You won't be bothered by noise during operation! It operates at a noise level below 80 dB, so earplugs are unnecessary. ☆ Cleaning: Easy disassembly and cleaning without tools, and it is also suitable for draining! 【Features】 ■ More than double the capacity compared to our conventional vibrating screens. ■ Low noise level below 80 dB, so earplugs are unnecessary. ■ Easy disassembly and cleaning without tools, and it is also suitable for draining! ■ A structure that protects operators from harmful substances such as dust and smoke generated from the product. *For more details, please download the PDF or contact us directly.

• Sieve/Shaker

A food printer that can accurately fill sauces and liquids without dirtying the belt.

You can accurately print your preferred design or pattern on the product. A patented sensor detects the product, allowing for precise filling of liquids and sauces. It applies the material from edge to edge without spilling. As a result, it is possible to keep the belt clean without getting it dirty. This also helps prevent waste of raw materials, making it recommended for cost savings and reducing food loss. It can also be used as a depositor.

• Food Processing Equipment

Leave the processing of cooking oil and waste oil to the High Temperature Filter.

The RUSSELL FINEX High Temperature Filter can filter up to 250°C and is a filtration device with a very high number of repeat users for waste oil treatment. ☆Benefits of Introduction☆ 1. Automation of filtration Filtration can be performed without operator involvement. 2. No bags or cartridges to replace There is no need to replace filter cartridges or bags, allowing for continuous processing (filtration) without stopping production. 3. Utilizing the characteristics of the High Temperature Filter, the filtration technology minimizes product loss to the greatest extent. 4. Easy maintenance due to tool-free machine design. 5. Lastly, the key feature of this device is the position of the motor. The keywords are offset and thermal conduction.

• Sieve/Shaker
• Other powder equipment
• Steel

Completely sealed!! Therefore, there is no worry about powder leakage. The RUSSELL FINEX vibrating sieve air lock model is loved and used worldwide.

★ Aero Lock Model Completely locks the upper and lower decks using a special method called Aero Lock, eliminating concerns about product powder leakage. ★ Processing capacity is more than double, but the size of the device is half. ★ It's a vibration sieve that makes no noise; it operates quietly. ★ The ease of maintenance is world-class. Can be disassembled and cleaned without tools!! No need for draining!!

• Sieve/Shaker
• Other powder equipment
• Steel

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If you require a detailed technical explanation, please contact us.

A "non-contact switch" that allows you to open and close doors simply by waving your hand, without directly touching the doorknob or switch! By adopting microwave technology, the risk of malfunction due to condensation in environments with temperature differences, such as cold storage warehouses, is significantly reduced. It reduces the risk of virus and bacterial infections in places where hygiene is a concern, such as food factories, hospitals, nursing facilities, and restaurant kitchens. 【Features】 ○ Reduces the risk of virus infection by allowing door operation without contact ○ Waterproof and dustproof (IP55 design), allowing the main unit to be washed with water (note: the wall surface (back side) is not applicable) ○ LED display and response sound allow for easy confirmation of detection status ○ Two pattern settings for one-shot and latch output are possible ○ The thinnest in the industry! Only 22mm thick! ◎ For more details, please download the catalog or contact us.

Japan is among the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of significant earthquakes occurring. For the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake measures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" ◎ For more details, please download the materials or contact us.

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four ways: left, center, right, with 4 spots and 12 spots settings. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor modes with a single model. 【Recommended for such places!】 ☑ Entrances facing busy corridors ☑ Counters or signs near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.