I have added 'Moisture Detection and Optical Filters' as a technical trend keyword.

This is a mirror that reflects near-infrared light, which causes heat. It has a proven track record in projectors and lighting devices where temperature rise is a concern.

1) Are you facing such issues? ■ I want to prevent the temperature from rising due to near-infrared light emitted from the light source. ■ Projectors and lighting devices are getting too hot. ■ Is it possible to transmit visible light while reflecting near-infrared (NIR)? ■ Can the wavelength range of the mirror be customized? 2) What is a hot mirror? A hot mirror is used in projectors and lighting devices where temperature rise due to infrared radiation is a concern. By using a hot mirror, it is possible to suppress temperature rise and enable bright light source design. As for the coating, it has a special coating that transmits visible light and reflects more than 95% of near-infrared light (NIR). It is used in lighting equipment that employs halogen or xenon light sources, as well as in light source reflection mirrors for medical devices.

• LED Module
• mirror
• Sensors

This is a bandpass filter that achieves a sharp rise and high transmittance in the infrared range (905nm). It is ideal for TOF sensors and LiDAR.

Are you facing any of these issues? - Is it possible to only transmit specific wavelengths in the infrared range? - I would like a bandpass filter suitable for TOF sensors. - I heard that the wavelength used in LiDAR is 905nm; can you create a film for that? - Since light other than the desired wavelength will cause noise, I would like to widen the stop band. - Given the range of incident angles, can this be taken into account? - Is it possible to mount this on AGVs or OHTs? The 905nm bandpass filter is a filter that transmits specific wavelengths by utilizing light interference through the deposition of dielectric films. Based on our proven results in visible light, we can achieve sharp wavelength separation and high transmission rates in the infrared range (905nm) by controlling the deposition process, making it ideal for photoelectric sensors (such as TOF sensors) that require delicate light. We have standard stock items available, so please consider them. https://www.e-coating.jp/stock/cat/filmtype/bandpassfilter/

• Distance measuring device
• Image Processing Equipment
• Sensors

This is an infrared wavelength filter optimized for optics, with plasma control technology enhanced to its limits.

Infrared materials are incredibly fragile! (Weak against scratches, weak against water, weak against chemicals) This common knowledge can be overturned with our company's technology. 1) Excellent infrared transmission properties This is a filter that transmits infrared light through the formation of a multilayer film, utilizing interference effects to achieve excellent transmission rates from near-infrared to far-infrared regions. 2) Design and customization available for desired wavelength ranges We can design and deposit films tailored to the wavelength ranges requested by our customers. Please inform us of the substrate type and wavelength range when making inquiries, as we will design according to the characteristics of the substrate. 3) Measurement equipment: FT-IR available Rest assured that we will always include a measurement chart (spectral characteristics) upon shipment. 4) Component support available We can not only handle substrate procurement and film deposition but also cut to any desired shape and ship as components. However, we will need detailed drawings. 5) Cleanroom compliance Our work environment maintains the necessary cleanliness levels from film deposition to inspection, ensuring a cleanroom operation. We have a robust system in place to address minute film defects (such as foreign particles in the film).

• Plastic processing machines (cutting and rolling)
• Transport and handling robots
• Surveillance Cameras

● To determine the sealing and waterproofing of sealed products based on pressure changes, it is not necessary to conduct tests that involve spraying water on the product or immersing it in water. ● Once the product is placed in a dedicated fixture within the inspection device, waterproofing can be quantitatively confirmed through automatic measurement. ● The target product size is W 300 × D 210 × H 100 mm or smaller. ● The target products include automotive cameras, smartphones, ECUs, small motors, and other packaging containers, and are effective for any products that require confirmation of sealing, waterproofing, and airtightness. ● For product specifications and details, please contact us.

In battery manufacturing lines, if components containing copper are used, there is a possibility that metal powder may mix in, dissolve, ionize, and pass through the separator, causing a malfunction that connects the positive and negative electrodes. Such minute metal powders may not be detected during pre-shipment inspections, and even if they are found, they can lead to various issues, such as the need to increase inspection processes to detect them. Therefore, Fukuda has developed a copper-free (all stainless steel) air leak tester that can be safely used in the production lines of battery manufacturers and secondary battery manufacturing equipment manufacturers. For product specifications and details, please refer to the "Related Product Information" and "Related Catalogs" below.

This is an air leak tester for battery cases of electric vehicles (EVs). The battery case has the characteristic of being "large with a significant internal volume, and its structure may deform due to internal pressure." As a result, air leak testing generates "noise caused by its large size and capacity" and "noise caused by expansion or deformation due to internal pressurization." To mitigate this noise, this device features a newly developed smoothing function and a linear fitting correction function used in combination during measurement. Additionally, to achieve low-pressure control that is difficult to manage and to expand flow for large volumes, we provide a bypass box (CBU-600) equipped with an electro-pneumatic regulator for precise pressure control and a pressurization valve with a large effective diameter to supply high flow rates. Measurement methods: Work-Work comparison, Work-Master comparison, Fixed Master comparison Measurement pressure range: 10 kPa, 20 kPa, 50 kPa (depending on specifications) Gauge pressure sensor accuracy: ±2% F.S. Differential pressure sensor accuracy: ±0.5% F.S. Group settings: 0 to 31 groups Power supply voltage / Power consumption: AC100 to 240 V / 100 VA

Fukuda's new flagship model. - Masterless type (FLA-0200 series) - General type (FLA-0201 series) Two models of air leak testers. With the mastering correction function, high-precision measurements can be achieved in a short time. Please take a look at the catalog.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!