Successfully achieved stable combustion of ammonia dedicated burners. The first in the country as a burner with an integrated heat exchanger!

Utilize waste heat at low cost! Energy-saving effects with a high-efficiency burner using preheated air! Introducing a gas burner with built-in heat exchanger for waste heat recovery.

The STBW burner is a heat recovery type burner equipped with a heat exchanger that collects combustion exhaust gases from around the gas burner combustion tube. Compared to regenerative burners and external heat exchangers, the STBW burner maintains a low initial cost while contributing to a quick return on investment with a fuel-saving efficiency of approximately 30%. By incorporating a simple heat-resistant heat exchanger, it features a low-cost structure that is less prone to clogging. The flame detection mechanism is integrated with the burner, allowing for a direct ignition method that does not require a pilot burner, resulting in excellent maintenance characteristics. 【Features】 - The price of the burner is significantly lower, offering excellent cost-effectiveness. - Self-exhaust gas recovery (recovery from the burner tip) - No need for a heat exchanger or waste heat recovery duct on the furnace side - Built-in heat exchanger made of heat-resistant metal - Excellent maintenance characteristics - Capable of high-load combustion in a sealed state *For more details, please refer to the PDF document or feel free to contact us.

• Drying Equipment
• Heating device
• Industrial Furnace

Contec Co., Ltd. has started selling the "SH-9210TSN," an industrial managed switching hub that has obtained CC-Link IE TSN recommended network wiring component certification Class B. It features dual power supply redundancy, a DC power input, eight gigabit ports, and two SFP slots. The SH-9210TSN complies with IEEE 802.3ab (1000BASE-T), IEEE 802.3u (100BASE-TX), and IEEE 802.3 (10BASE-T) standards, and is designed for use in environments where quiet operation and long lifespan are required due to its fanless design. Additionally, it achieves an operating temperature range of -10 to 65°C thanks to its excellent heat dissipation metal casing. It can be installed on a 35mm DIN rail or mounted on walls using various mounting brackets. In addition to a wide-range DC power input (12-48VDC), it supports input from two power supply lines and includes various managed functions for network management, control, and reliability enhancement.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If you require a detailed technical explanation, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is kept to a minimum. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without any thermal impact on the base material. Repairs can be conducted in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is required, please contact us.