Easy to take out! Utility model registration for partition shelves for metal masks.

Only the necessary features! Simple rack for metal masks.

▶ This is a storage shelf for metal masks with a focus on simplicity and a frame. ▶ Dimensions of the target metal mask: 650×550×30 [mm] (customizable) ▶ Storage capacity: 15 pieces per shelf (30 pieces per unit) ▶ It is easy to manage as it can be organized on the shelf, and the sliding mechanism makes retrieval effortless. ▶ The sliding dividers compress the gaps that were necessary for inserting fingers. ▶ It is also possible to adjust to the size of the customer's metal masks. [Features] - Made of stainless steel, it is less likely to suffer from durability degradation over time due to rust.

• Printed Circuit Board
• Other mounting machines
• rack

Here are some good points about the product that we heard from customers who adopted it!

【Dedicated Shelf with Slide Function for Metal Masks】 We are currently sharing the positive feedback we've received from customers who have adopted our product, along with photos in our catalog data! 1. Working while wearing anti-static gloves 2. Wanting to compress the storage space for metal masks 3. Handling metal masks in a clean room 4. Frequent changes in the layout of the manufacturing line If any of these apply to you, please consider our products!

• Other mounting machines
• rack
• Other clean room equipment and facilities

Compressed storage with sliding dividers! A sturdy metal mask storage shelf!

▶ This is a storage shelf for metal masks with a frame. ▶ It can store 52 metal masks, each assumed to be 30mm thick and weighing approximately 4kg. ▶ The sliding dividers compress the gaps that were necessary for inserting fingers. ▶ The dimensions can be customized to fit your metal masks. ▶ We can also accept inquiries for custom external dimensions and the number of masks stored per unit. [Features] - Made of stainless steel, it is less likely to experience deterioration over time due to rust. - It is easy to move and set up with casters and adjusters.

• Printed Circuit Board
• Other processing machines
• Other mounting machines

Achieve an easy-to-access and efficient storage shelf for metal masks with sliding dividers!

【Features】 ■ High storage efficiency - Can store 52 sheets of 650×550×30mm - Shelf bottom area is approximately 0.8m², saving space ■ Slide mechanism - The slide mechanism compresses the gap needed for retrieval, improving storage efficiency - A grip area is created, making retrieval very easy even while wearing safety gloves! ■ Attention to detail - Made primarily of stainless steel for clean usage - Equipped with casters for easy movement, allowing flexible adaptation to line construction - Customization options available for size and storage capacity, among other details

• Printed Circuit Board
• Other mounting machines
• rack

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.

Are you struggling to explain "safety" to the client using just drawings? - The risks in blind spots are difficult to convey to the client through drawings alone. - Safety measures often become a target for cost reduction, making it hard to communicate their necessity. - There is a concern that the client might say, "It's more dangerous than I thought," after completion. Risks that are visible to design professionals are not easily understood intuitively by clients who are outside the field. This document is not just a simple explanation of sensor functions; it is a guide to visually explain "why sensors are necessary in that location." It can be used directly as explanatory material for the client. Here are three key points for utilizing this document: 1. Visualization of Risks Blind spots during vehicle departure and contact risks within the site are illustrated clearly. 2. Clarification of Selection Criteria A comparison table outlines the differences between complex sensor types such as infrared, ultrasonic, and loop coils. 3. Diagram of System Configuration It illustrates not just the sensors alone, but how they combine with components like rotating lights and control panels, providing practical assistance for electrical equipment design. Please make use of this to prevent "rework after completion" and "accident risks."

In facilities operating nurse call systems, we have made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call system. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. This helps prevent accidents caused by falls, slips, or wandering, contributing to the efficiency of medical operations. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call system. ○ Up to 5 transmitters can be registered with a single receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.