[Exhibition Announcement] We will be exhibiting at the Machine Element Technology Exhibition 2025 (Tokyo)!

A Reliable Choice to Transform Harsh Environments: High-Performance PEEK Resin Coating

The PEEK (Polyether Ether Ketone) resin, which excels in heat resistance, chemical resistance, and wear resistance, demonstrates its true value in high-temperature and high-load environments that typical resins cannot handle. In 1999, we commercialized the world's first PEEK resin coating, "PEEKCOAT," and based on over 20 years of accumulated expertise, our unique coating technology uniformly applies PEEK resin to various substrates such as metals and ceramics. ■ Features of PEEKCOAT 【Heat Resistance】 Continuous use temperature of 260°C, with no concerns about degradation due to heat. 【Chemical Resistance】 Exhibits high resistance to strong alkalis and organic solvents. 【Wear Resistance】 Suitable for sliding parts and high-load areas. 【Flame Resistance】 Does not contain halogen elements such as chlorine or fluorine, so no toxic gases are generated upon decomposition. "Is there a coating that can be used under these conditions?" Please feel free to reach out to us with that question! We will maximize the potential of PEEK resin! We can accommodate mass production as well as flexible custom specifications for individual items! We also accept requests for prototypes and evaluations tailored to your needs! If you would like detailed technical materials or sample provision, please do not hesitate to contact us!

• Surface treatment contract service

Prevention of foreign matter adhesion on cutting edges and precision molds! "Ultra" thin film release coating "NonStick STC" (trademark application pending)

"NonStick STC" is an ultra-thin release coating applicable to cutting tools and precision molds! ■ Features of NonStick STC - Smooth No roughening such as blasting is required as a pre-treatment before coating, and post-polishing of the cutting edge after coating is also unnecessary. This helps maintain the sharpness of the cutting tools. - Transparent & Thin Being colorless and transparent with a film thickness of less than 1µm, it preserves the texture of the material. Additionally, it prevents dimensional changes in molds due to coating, which is crucial for precision molds that require accuracy. - Clean It is difficult for adhesive foreign substances, such as tape adhesives, to adhere, and if they do, they can be easily removed. This prevents a decrease in the sharpness of cutting tools and contamination of molds due to foreign substance adhesion.

• Processing Contract
• Surface treatment contract service

Fluororesin coating ideal for use in high-temperature environments, such as hot melt bonding and hot pressing.

Thermo Pro Release is a high-durability, high-release fluororesin coating originally developed by Nikken Coating Industry. It demonstrates excellent release properties and durability even in high-temperature environments above 200°C, preventing resin adhesion and thread pulling during thermal welding and thermal riveting processes. With our unique evaluation technology, we can propose the optimal coating specifications tailored to the customer's usage environment (temperature range, type of resin, etc.). It also excels in abrasion resistance and adhesion, lasting longer than conventional fluororesin coatings. This reduces the effort required for mold cleaning and maintenance, contributing to improved production efficiency and reduced maintenance costs!

• Processing Contract
• Surface treatment contract service

Reliable fluoropolymer coating technology that accommodates a wide range of applications.

The excellent non-stick, chemical resistance, and heat resistance of fluoropolymer coatings make them a highly reliable surface treatment technology that continues to be adopted in various fields such as food, chemicals, semiconductors, medical, and electronic components. At Nikken Coating Industry, we utilize a variety of fluoropolymer materials such as PTFE, PFA, FEP, and ETFE, selecting the most suitable coating based on the substrate and usage conditions. ■ Features of Fluoropolymer Coatings 【Non-stick】 Difficult for sticky resins or foreign substances to adhere, offering excellent release properties, dirt resistance, and cleanability. 【Water and Oil Repellency】 Easily repels water and oil, helping to reduce liquid carryover in plating processing jigs. 【Lubricity】 A slippery surface is formed with a dynamic friction coefficient μ = 0.1 or less. 【Chemical Resistance】 High resistance to strong acids, strong alkalis, and organic solvents. 【Heat Resistance】 Capable of withstanding high-temperature environments up to 260°C (varies by material). 【Electrical Properties】 Suitable for electronic and electrical component applications, leveraging excellent insulation properties. 【Customizability】 Based on extensive experience and know-how, we propose the optimal materials from PTFE, PFA, FEP, and ETFE. We flexibly accommodate everything from mass-produced items to one-off prototypes!

• Surface treatment contract service

Features: ● Equipped with Intel 13th generation Core i3-1320PE/i5-1340PE/i7-1370PE ● Equipped with Intel Iris Xe graphics ● DDR5 SODIMM x 2 slots, expandable up to 96GB (sold separately) ● Supports dual HDMI video output ● Equipped with 2.5G LAN x 5 (4 ports support IEEE802.3 at PSE) Maximum power supply capacity when using DC12V–18V power: 20W (total for 4 ports) Maximum power supply capacity when using DC19V–36V power: 60W (total for 4 ports) ● Wide range 9–36V DC power input (terminal block type) ● Operating temperature range -25–60°C ● Onboard TPM 2.0 * This model does not include memory, storage, or OS.

Features ● Intel Core i3-1320PE/i5-1340PE/i7-1370PE ● DDE5 SODIMM x 2 (up to 96GB) (sold separately) ● 2.5 GbE x 5 (including 4 PoE ports) ● PCIe [x1] Slot x 1 & PCI Slot x 1 for expansion ● DC power input compatible with 9V to 36V ● Wide temperature operation range -20℃ to 60℃

Features: ● Compatible with Intel Core Ultra processors (Series 2) ● A1 SKU: Intel H810 chipset A2 SKU: Intel Q870 chipset ● Intel Xe LPG graphics engine ● DDR5 SODIMM ×2, up to 96GB (sold separately) ● HDMI 2.0 ×2 ● 2.5GbE LAN ×2, 1GbE LAN ×1 ● 10V–35V DC input (4-pin terminal block) ● Wide temperature range: -25°C to 60°C ● Equipped with TPM 2.0 ● Supports iAMT (A2 SKU only) * This model does not include memory, storage, or OS.

At the "11th Monozukuri World Nagoya" held at Port Messe Nagoya from April 8 (Wednesday) to April 10 (Friday), we will be showcasing various inspection products at the booth of FOVA Tech, a sales company of the Duplo Group. In the manufacturing industry, addressing labor shortages, along with achieving both productivity improvement and quality stabilization, has become an important management challenge. Our company has set the realization of a "manufacturing site that does not rely too much on people" as our development philosophy, and we have been advancing the development of automation equipment that possesses flexibility and high expandability, making it easy to adapt to existing lines. In this exhibition, we will showcase automation solutions that can optimize multiple processes integrally, and you will be able to confirm specific operational images after implementation.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.