Prymix will exhibit at the "Cosmetics Industry Technology Exhibition (Pacifico Yokohama)" starting May 14!

Research and development model of the CLEARSTAR® vacuum emulsification device/system capable of automatic cleaning.

CLEARSTAR(R) is a vacuum emulsification device/system capable of CIP (Clean-in-Place) and SIP (Sterilize-in-Place). With the strong shear force and pumping capability of the Neo Kaiser(R) stirring unit located below the tank, the entire material can be uniformly stirred through external circulation (from the bottom of the tank to the external circulation piping and back to the top of the tank). ◎ The model 5 is a research prototype of CLEARSTAR(R). ◎ Scale-up is possible!

• Mixer/agitator

[Video available] Enables uniform dispersion in a short time! A particle design mixer (high-speed stirrer) that achieves sharp particle size distribution and micronization down to nanometers.

Filmix® is a mixer (dispersion stirring device) that enables sharp particle size distribution and micronization to nanometer sizes, which was difficult with conventional high-speed stirrers. Emulsification and dispersion in seconds significantly shorten research and development time. The 56-L model is capable of both batch and continuous operation on a tabletop. Once the conditions are set in batch mode, continuous experiments can be conducted by assembling a line. This single unit can be compactly used for everything from research and development to small-scale production!

• Emulsifier/Disperser
• Mixer/agitator
• Homogenizer

Telecorta has been renewed to be even more resistant to high viscosity! It demonstrates effectiveness in dissolution, dispersion, and mixing for high viscosity stirring (patent obtained). Testing is currently being accepted.

The Telecolta R is a stirring blade that generates a strong liquid flow by adopting a propeller shape while possessing dispersion power equivalent to that of a homodisperse. It exhibits strong dispersion power with the main wings that have their tips bent, and the auxiliary wings, which are slightly larger in diameter than the main wings, help reduce the entrapment of bubbles. It has been renewed to be even more effective for high-viscosity materials! *Testing for the Telecolta R is currently being accepted. For more details, please contact us using the form below.

• Emulsifier/Disperser
• Mixer/agitator
• Homogenizer

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

This is an introduction to "outer diameter film polishing," which is used for ultra-finish machining of various shaft-type workpieces. - Wouldn't you like to achieve ultra-finish machining more easily, safely, and with less variation? Please take a look at what film polishing is, along with related products and catalogs!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed without causing any thermal impact on the base material. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

We are pleased to announce that Tokyo Machine Works Co., Ltd. will be exhibiting at the "INNOVATION EXPO 2025" to be held at Tokyo Big Sight from September 10 (Wednesday) to September 12 (Friday), 2025. 【Exhibited Equipment】 - 1-ton portable autonomous mobile robot (AMR) - 2-ton portable unmanned transport vehicle (AGV) - Shutter-equipped unmanned transport vehicle - Autonomous cleaning robot, etc. 【Booth Number】 - 6-405 You will have the opportunity to see each machine up close, including demonstrations that link the equipment together. We sincerely look forward to your visit during this event. Please note that pre-registration (free of charge) is required to attend the exhibition, so we kindly ask you to register using the link below. https://www.logistech-online.com/jp/registration.php?exhibitor=EX000072 If you would like an invitation, please request it through our contact form.