【UV Inspection Application】8.1MP CoaXPress Area Camera | Supports UV Wavelength Range (200–400nm) | Compact 29mm Square

High-speed, high-pixel, high-quality camera corresponding to the UV wavelength range.

■Features This is a UV-compatible model equipped with Sony's CMOS sensor IMX487, featuring an 8.1MP camera. It combines global shutter capability with high-speed performance, supporting output up to 133.2fps, enabling high-quality imaging with significantly reduced noise. Thanks to the incorporation of an Ultra Low Power FPGA and excellent design technology, it achieves a compact housing with dimensions of 29mm square. Its low power consumption and excellent heat dissipation allow for use without cooling fans or heat sinks. The image size is a 2/3-inch sensor with 2.74μm pixels, compatible with C-mount while offering high resolution. With a resolution of 2848×2848 square pixels, it is an ideal model that meets the needs for miniaturization, speed, and high pixel count, combining high resolution and high speed. This UV camera can be considered for inspections in fields such as semiconductors, as well as in new areas where high speed is required.

• Color camera

Are you having trouble with your camera overheating?

With the CoaXPress camera from Japan Bopixel, it is possible to significantly reduce heat generation. This is a series of area scan cameras developed for high-speed image transmission in machine vision applications using 75Ω coaxial cables. It is ideal for situations where you want to extend the cable length while consistently capturing high-resolution and high-frame-rate images. We offer a diverse lineup ranging from 0.5MP to a maximum of 65MP, and there are models available where you can choose the connector orientation from the back (straight model) or the top (angle model). The camera housing is also equipped with mounting taps, allowing it to accommodate various installation positions and conditions. Thanks to a high-reliability design featuring low power consumption, low heat generation, and excellent heat dissipation with next-generation key devices, our cameras consume less power compared to other products with the same sensor and interface, achieving one of the smallest chassis sizes in the industry without the need for additional heat dissipation items.

• Color camera
• Monochrome camera
• High Speed Camera

With Japan Bopixel's "CoaXPress camera," it is possible to significantly reduce heat generation!

The transition from CCD to CMOS has accelerated the trend towards higher resolution, and the fps continues to increase, resulting in greater power consumption (and heat generation) of cameras. As a result, concerns about inspection accuracy due to thermal effects on lenses have increased, and the impact on objects and peripheral devices can no longer be ignored. At Japan Bopixel, we have successfully utilized "Ultra Low Power FPGA," which can reduce power consumption by over 50% compared to comparable FPGAs, instead of the FPGAs commonly adopted by most camera manufacturers, which are the main source of heat generation in industrial cameras. By fundamentally suppressing heat generation, we can significantly reduce the power consumption and heat of the camera, allowing us to solve thermal issues with a new approach that leverages the advantages of being a latecomer in the market. *For more details, please download the catalog or feel free to contact us.*

• Visual Inspection Equipment
• Monochrome camera
• Technical and Reference Books

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

On September 11, 2025, AC Tasarim, a cable blade manufacturer, and our company signed a sales agency agreement for Japan. This was also announced in the company's press release and on social media. Founded in Turkey in 2003, AC Tasarim manufactures flexible EMI cable shields (copper braid), polyester braid, meta-aramid braid (Nomex cable sleeves), flat copper braid busbars/ground braids, all AA59569-coded copper braids, and released AeroBraid in 2025, the world's lightest EMI braid. All manufactured copper braids are certified to military standards. AC Tasarim products hold key certifications including VDE/VG certification, German Federal Armed Forces certification, NATO NSN coding, AS9100 quality certification, and JOSCAR certification. Cable braids and EMI shielding products, essential for wire harnesses in the aerospace and defense industries, are becoming increasingly difficult to source as demand rises. TC Tasarim products are stocked by manufacturers and distributors to ensure quick response times.

Starting from September 22, 2025 (Monday), we will begin accepting orders for five new lineups tailored to various applications in the "N-SELECT" series of transport vehicles. In this new development, we will introduce the following five models that maintain the basic performance of the traditional N-SELECT while addressing more specialized needs: SC (Super Carrier) - Based on the traditional N-SELECT, this model is specialized for transporting immobile and accident vehicles. It is ideal for the automotive maintenance and towing industry. RC (Racing Carrier) - Designed with a gentle loading and unloading angle, this model is perfect for transporting sports cars and lowered vehicles. TP (Transporter) - A standard model optimized for the transportation of general passenger vehicles, suitable for a wide range of industries. ONE (Single Vehicle Loading Model) - A simple and efficient design dedicated to loading one vehicle. Recommended for small-scale transport and individual entrepreneurs. RS (Rescue) - A single vehicle loading model equipped with a crane, enhancing its capability to respond in accident scenes and tight spaces. With these lineups, N-SELECT evolves into a product group that meets a wider variety of on-site needs. We will continue to promote product development that reflects the voices from the field as the "preferred transport vehicle."