[News] Papermaking Process - Trimming | Wear-resistant and sharp-cutting spray nozzle

The "CP, CM, CTM" series is a spray nozzle that suppresses the adhesion of paper dust and maintains trimming accuracy with stable flow and pressure.

The "CP・CCP" series is a straight spray nozzle that injects the strongest straight jet flow, with a wide range of operating pressure and flow types, capable of accommodating various usage conditions. The "CP-STB" series is designed with a rectifier attached to the CP series, maintaining a stable straight jet flow even in curved piping where turbulence occurs. The "UT+CP" series features a ball joint attached to the CP series, allowing for adjustment of the spray direction up to 40 degrees, enabling fine-tuning of trimming position and angle. The "CM, CMP-T," "CM-FB," and "CTM" series have a body that separates the nozzle part from the strainer part, allowing for the replacement of the worn nozzle part. These nozzles have a nozzle tip made of ceramic (the CTM series uses carbide), which is resistant to wear and maintains performance over a long period. Additionally, the "CM-FB" series is designed to minimize the adhesion of paper dust to the nozzle body, featuring a small diameter and tapered shape, making it effective in environments troubled by paper dust. *Other spray nozzles are also available in a rich lineup. For quotes, custom orders, or any concerns regarding nozzles, please feel free to contact us. Phone and online consultations are also available at any time.*

• nozzle

● The production time for casting prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly creating sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be created in a single molding process. This allows for the verification of multiple types in a short period.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

Dear Sir/Madam, I would like to express my congratulations on the continued prosperity of your company. Thank you very much for your exceptional support. We would like to inform you that our company will be closed for winter holidays during the following period. We apologize for any inconvenience this may cause and kindly ask for your understanding. 1. Winter Holiday Period From Thursday, December 28, 2023, to Thursday, January 4, 2024. 2. Business Operations After the Winter Holiday Period We will resume normal operations from Friday, January 5, 2024.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.