The email newsletter "Epsilon Communication No. 46" has been distributed.

Connect to a solar cell and operates at the maximum operating point (Pmax). It can track the maximum power point under various solar illumination, angle, and temperature conditions.

To evaluate the power generation performance of solar cells, it is necessary to actually put the solar cells in a generating state. Without connecting a load, no current will flow, and thus power generation performance cannot be measured. This device consumes the output power by converting it into heat internally when the solar cells are connected. By simply establishing a minimal measurement environment, it is possible to measure the power generation of the solar cells (the device measures voltage, current, and power every second). For tracking the maximum power point, a unique MPPT tracking method is employed, which, in addition to the conventional sequential power comparison (hill climbing method), sweeps the I-V curve output characteristics of the solar cells once per minute to explore the maximum operating point, thereby performing MPPT control. As a result, even when the maximum operating point (Pmax) changes significantly due to sudden weather changes or shading, it continues to track the maximum operating point. Additionally, when combined with a PV analyzer (I-V curve tracer), it is possible to construct a simulated system under load for outdoor exposure tests. This device is used for applications such as confirming domestic power generation amounts for new types of solar cells (perovskite type), vehicle-mounted solar cells, and OEM products.

• Testing Equipment and Devices

Solar cell strings with a system voltage of up to 400V can be measured. Reliable I-V measurement with a linear sweep within 200[ms]. [Demo units available for loan.]

The "Epsilon 400" is an IV curve tracer that supports the voltage range of 400V, which is common for many residential solar power generation systems. It has been newly renewed from the old model PVA12280! Compact and lightweight, it features simple operability and beautiful displays on a color LCD. It can store up to 9999 data points in internal memory, and it allows for approximately 1-second result display, enabling short-term measurements that are less affected by sudden changes in sunlight or shadows. 【Features】 ■ Capable of measuring 400[V] and 30[A] ■ Equipped with an automatic measurement function (manual/automatic selection available) ■ Japanese mode added to the operation guide (English also selectable) ■ Safe operation with reverse connection detection function (misuse detection) ■ Internal data storage capacity of 9999 points, suitable for large-scale power plants ■ Reliable and smooth graph display through 1024-point measurements ■ Linear sweep within 200[ms], with results displayed in about 1 second * For more details, please refer to the PDF document or feel free to contact us. * Demo units are also available for loan, so please get in touch.

• Logic Analyzer
• Other measurement, recording and measuring instruments

Solar cell strings with a system voltage of up to 1000V can be measured. Reliable I-V measurement with a linear sweep within 200 [ms]!

This is an I-V curve tracer compatible with the voltage range of 1000V, suitable for many residential and industrial solar power generation systems. It is an I-V curve tracer for solar cell strings that supports 1000V/30A. The functionality has been significantly renewed from the old PVA14300 model! It can store up to 9999 data points in internal memory, displays results in about 1 second, and allows for short-duration measurements that are less affected by sudden changes in sunlight or shading. 【Features】 - Capable of measuring 1000[V] and 30[A] (can also measure ultra-high output modules such as parallel strings and bifacial modules) - Measurement interval shortened to 5-12 seconds (varies depending on the measurement target) - Equipped with an automatic measurement function (manual/automatic selection available) - Added Japanese mode to the operation guide (English option also available) - Safe operation with reverse connection detection function (misuse detection) - Internal data storage capacity of 9999 points, suitable for large-scale power plants.

• Other measurement, recording and measuring instruments

PV strings with a system voltage of up to 1500V can be measured. Reliable I-V measurements with a linear sweep within 200 ms!

The "Epsilon 1500" is an I-V curve tracer that supports a voltage range of 1500V, suitable for large industrial solar power generation systems. It is an I-V curve tracer for solar cell strings compatible with 1500V/30A. The functions have been significantly renewed from conventional models. It can store up to 9999 data points in internal memory, displays results in about 1 second, and allows for short-term measurements that are less affected by sudden changes in sunlight or shading. 【Features】 - Capable of measuring 1500[V] and 30[A] (can also measure ultra-high output modules such as parallel strings and bifacial modules) - Added a Japanese mode to the operation guide (English is also selectable) - Equipped with reverse connection detection for safe operation (misuse detection) - Uses MC4 connectors for measurement connections, ensuring reliable and safe measurements - Has a voltage tester function, allowing for continuous voltage measurement up to 1500[V] - Internal data storage capacity of 9999 points, suitable for large-scale power plants.

• Logic Analyzer
• Other electronic measuring instruments

[To the owners of parking lots and parking lot construction companies] "I'm worried about the possibility of colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those facing sidewalks or roadways are particularly prone to dangerous incidents such as collisions with pedestrians or between vehicles. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures at various sites and alerts the surroundings with LED lights and buzzers. The system consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *When using the exit warning system, we kindly ask customers to arrange for the switching power supply (24V), LED rotating light, control panel, circuit breaker, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. [Contents Included] ○ Vehicle Exit Warning System Configuration ○ Comparison Table of Exit Warning Sensors ○ Four Modes ○ Wide Range of Applications ○ Customer Feedback ○ Appearance Diagram / Specifications ◎ For more details, please contact us or download the catalog.

Automate pressure control and use it as a pressure/back pressure regulator! The Auto Pressure Controller "SLA/SLAMf Series" is equipped with a wealth of options and features. By combining the SLA/SLAMf Series with mass flow controllers and meters, you can achieve consistency in control (process) with the advantages of a single platform. The SLA/SLAMf Series uses a primary flow calibration system that is traceable to international standards, characterized by high precision, long-term stability of the zero point, and excellent reproducibility based on our superior measurement systems and methods. Applications: ■ Thin film processes ■ Catalyst research and pilot processes in chemical and petrochemical industries ■ Laboratory and analytical systems ■ Fuel cell technology ■ Life sciences bioreactors

In recent times, there has been a growing interest in infection control measures and facility hygiene management. Our company offers non-contact sensor products that are recommended for commercial facilities, food factories, and nursing and caregiving facilities. 【Sensors for Automatic Doors】 ● Light Touch Sensor HA-T401 … When you wave your hand in front of the automatic door, the sensor detects the movement and opens or closes the door. It is recommended for making doors that use touch switches non-contact. ● Hand Wave Sensor PF-R5, PF-U2, DHS-1 … Opens and closes the automatic door by waving your hand in front of the sensor. ● Foot Switch PF-01S/01D/03S/05 … Opens and closes the automatic door by placing your foot in the opening. 【Access Control System】 ● Face Recognition + Unmanned Temperature Measurement DS Series … Capable of detecting mask-wearing and measuring body temperature simultaneously with face recognition. ● Automatic Disinfectant Spray Dispenser PHW-03B … Automatically sprays disinfectant when you wave your hand in front of the sensor. 【Nursing and Care Sensors】 ● Infrared Bed Exit Sensor "Just Place It Pole-kun" … This bed exit sensor is installed next to the bed and alerts via nurse call when the subject enters the detection range. ◎ For more details, please download the catalog or contact us.

A world where miniaturization and high performance are advancing daily. Mobile phones now have features that were unimaginable just a few years ago. The realization of such high performance is thanks to thin film technology, which is utilized in a wide range of applications as follows: 【Applications of Thin Film Technology】 - Microelectronics - Anti-reflective coatings for glass - Antibacterial metal coatings for medical devices - Flexible solar cells Thin film technology is defined as "the process of creating, coating, and processing thin film materials on a substrate surface." We are currently publishing basic knowledge materials on glass coatings for the glass industry! ⚫ Glass Coatings ⚫ What is Low-E Glass? ⚫ Laminating and Materials of Low-E Coatings ⚫ Application Requirements ⚫ What is Low-E Coating Technology? ⚫ Glass Coating Market Please take a moment to read it. https://mono.ipros.com/news/detail/129167/

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!