[Missed Broadcast] "Optimization of Drainage Monitoring: Utilizing Automatic Water Sampling Devices and TOC Analyzers"

Supports particles up to 0.8mm - Laboratory TOC/TN Analyzer QP1680

The QP1680 is a laboratory TOC/TNb analyzer. Due to its combustion oxidation method, it can handle relatively high-concentration samples that contain fine particles and salts. In addition to the type that performs combined analysis of total organic carbon (TOC) and total bound nitrogen (TNb), there are also types that measure only TOC or only TNb, allowing you to choose according to your needs. Accurate measurement of TOC and TNb is essential for optimizing industrial processes, improving product quality, and protecting the environment. The QP1680 provides efficient monitoring and reliable measurement results.

• Water quality testing

TOC analyzer with internal automatic cleaning function that reduces clogging and maintenance hassle! Demo units available for loan.

The online TOC analyzer BioTector offers several models tailored to your usage needs. The 'B7000i' is an online TOC analyzer designed for high-concentration wastewater, equipped with an internal automatic cleaning function that minimizes clogging and maintenance hassles. It can measure wastewater containing soft particles up to 2mm in diameter without dilution, allowing for automatic measurements without downtime, without the need for cleaning clogs or stopping the device. Depending on the application, various models can be selected for COD/BOD/TC, with one unit capable of handling up to 6 channels. Explosion-proof models (overseas explosion-proof) are also available. It employs a unique wet two-stage oxidation method. If there are challenges with oxidation power in the wet method, this approach overcomes those issues. 【Features】 ■ Internal automatic cleaning function ■ Reduces clogging and maintenance hassles ■ Annual operating rate of over 99% ■ Various model selections available based on application *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Other measurement, recording and measuring instruments

Simultaneous automatic measurement of TN and TP along with TOC! An online TOC analyzer that contributes to the optimization of wastewater processes.

●BioTector B7000 can measure TOC simultaneously with TN/TP. The simultaneous measurement cycle for TOC/TN/TP takes around 10 minutes, and it automatically cleans the sample tube while operating, eliminating downtime for cleaning clogged drainage. The short measurement cycle for TN/TP is well-received: some customers use it to measure only TN/TP or either one without measuring TOC. ●Measurement Time ◎TOC: <7 minutes ◎TN: TOC <7 minutes, TN <2 minutes ◎TP: TOC <10 minutes, TN/TP <8 minutes ●Measurement Range ◎TOC: Minimum 0-50 mg/L, Maximum 0-20,000 mg/L ◎TN: (Cell length 2mm) Minimum 0-19 mg/L, Maximum 0-5,000 mg/L, (Cell length 0.5mm) Minimum 2-55 mg/L, Maximum 160-15,000 mg/L ◎TP: (Cell length 10mm) Minimum 0-11 mg/L, Maximum 0-3,000 mg/L, (Cell length 5mm) Minimum 1-18 mg/L, Maximum 60-5,000 mg/L Please also check out the video summarizing "no clogging" in 50 seconds.

• Water quality testing

Auto-sampler equipped with a cooler. Easily movable to the sampling source with optional casters.

The Hack Model 2000 portable automatic water sampler with cooling type is equipped with a cooler, allowing for the refrigeration of samples. By using optional casters, it can be easily moved to the sampling source. Therefore, the power supply is compatible with both AC and DC.

• Other measurement, recording and measuring instruments

Solving the issue of corrosion caused by stagnant hydrogen sulfide in automatic water sampling, with temperature management also possible.

The automatic water sampler AS950 is a system that automatically samples water and stores it in a bottle. It features a lightweight design, low power consumption, and excellent mobility, making it ideal for sampling in wastewater treatment plants, rivers, industrial effluents, wastewater, and rainwater. You can choose from three types depending on the sampling scenario. This challenge is addressed by placing the compressor at the top. It is designed to be used in high humidity and corrosive environments, minimizing damage from rodents and water, while also considering environmental conservation.

• Water quality testing

【Key Points of This Seminar】 - What is "push-type"? The true nature of common waste in the workplace - Basic principles of pull production and steps for on-site implementation - The concept of "downstream pull" to reduce work-in-progress and inventory - Case studies of companies that have made improvements - Specific methods for establishing a small start 【Target Audience: Improvement leaders and management】 - Those who feel there is too much "overproduction," "bottlenecks," and "wasteful movements" in the workplace - Those struggling with the gap between production planning and actual work - Those looking for ways to sustain improvement activities - Those who want to know practical methods for implementing TPS (Toyota Production System) ~ Visualizing waste to achieve "just enough, when needed" ~ "Is your workplace being 'pushed'?" In the workplace, issues such as "produced but not used" and "work-in-progress overflowing and halting flow" are common. Many of these problems may stem from push-type production, where items are made "just in case" rather than "because they are needed." A chain moves easily when "pulled," but what happens when it is "pushed"? ── This is precisely the difference between push and pull. We will teach you the system of production that "does not overproduce and does not stagnate" based on the concept of "pull production."

**Seminar Points** Improvement means changing standards for the better. There can be no improvement where there are no standards. If there are no standards, start by creating them. Standards are "rules." What to decide are "procedures," "methods," and "timing." This seminar is focused on determining "procedures" and creating "work instruction documents." **"Without standards, there is no improvement" — Learning from Toyota's teachings on documentation in the workplace** The source of Toyota's strength lies in the concepts of "improvement" and "standardization." At the core of this is a culture of making insights and skills visible in the workplace and documenting them. In other words, it is a system of knowledge transfer through documentation. Relying on the experience and intuition of veterans can be a strength in the workplace, but it also carries the risk that quality may change when people change. By ensuring that everyone performs tasks in the same way, we can achieve the same quality products (good products) in the same amount of time. First and foremost, the development of "work instruction documents" is essential. When presenting work instruction documents in video format, it is also a prerequisite that this "foundational document" is well established. *For more details, please download the PDF or contact us.*

We would like to extend our heartfelt congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will introduce a number of products, including our new product, the Pillow Packaging Full Air Tightness Inspection Machine MSQ-2003. We sincerely apologize for the inconvenience during your busy schedule, but we would like to invite you to visit us at this opportunity. 【 Exhibition Name 】 JAPAN PACK 2025 Japan Packaging Industry Exhibition https://www.japanpack.jp/ 【 Dates 】 October 7 (Tuesday) to October 10 (Friday), 2025 *4 days 10:00 AM to 5:00 PM 【 Venue / Booth Number 】 Tokyo Big Sight / East Hall 8, Booth 8-505

Kobayashi Co., Ltd. will be exhibiting at the 5th Sustainable Materials Exhibition (SUSMA) held at Makuhari Messe. This exhibition is a specialized event focused on sustainable materials (environmentally friendly materials) and their manufacturing and recycling technologies. Technicians, product planners, and management from various industrial sectors such as electronics, automotive, batteries, and construction materials, as well as manufacturers of food, beverages, daily necessities, and miscellaneous goods will be attending. We sincerely look forward to your visit.

The "Team Cohesion and Team Strength Development Seminar" is an online seminar that provides techniques for demonstrating leadership that drives members and achieves results as a team. "Become a Leader Who Unites the Team from an Excellent Player" The cornerstone of the workplace is the leadership class, such as supervisors and team leaders. It is crucial for these individuals, who know the front lines, to demonstrate leadership that drives the work and leads the members. No matter how excellent a player is, if they work alone, they will only ever be as strong as one horsepower. It’s about demonstrating strength as a team! In other words, it’s about moving people… and that requires a deep understanding of others and the ability to respond. I believe that the most important aspects are the perspective and execution needed to involve those around you, align the vectors, and propel the team forward. [What You Will Learn] ■ Delegating Work ⇒ The key points and tips for confidently delegating work instead of taking it all on yourself. ■ The Four Windows of Interpersonal Relationships ⇒ How to deeply understand yourself and help others recognize you better. ■ Mentoring Skills for Junior Colleagues ⇒ Analyzing the guidance necessary for the "Hō-Ren-Sō" (reporting, communicating, and consulting) to function through short case studies. *For more details, please download the PDF or contact us.