Overseas (UK/Netherlands) Exhibition Participation Information

Due to the low ceiling height, this is a must-see for those who have given up on installing metal detectors and conveyors above the packaging machine!

▶Issue: Before further processing the powder in the next stage (such as packaging machines), it is necessary to inspect for the presence of metal foreign objects using a metal detector. To achieve high sensitivity, the powder needs to be inspected by free falling, but due to low ceiling height and operational inconvenience, it is not possible to install the metal detector in the next stage. ▶Solution: The CEIA metal detector will be installed under a Volkmann vacuum conveyor and on a Volkmann mobile lifting platform. The height-adjustable lifting platform will allow the product discharge outlet of the metal detector to be adjusted to the appropriate height for the mobile container. Additionally, the vacuum conveyor can be lowered to a height that allows the mobile lifting platform to pass through the door. The powder will be transported, for example, from an IBC container to the mobile lifting platform and then to the metal detector via vacuum conveying. Metal foreign objects will be sorted and collected in a separate bottle. The inspected powder will be collected in the mobile container. Another vacuum conveyor is installed for the next stage, such as the packaging machine, from which the powder will be drawn from this container. Inspection and separation of metal parts can be conducted very close to the next stage, as well as in more distant production areas.

• Powder Supply Device
• Powder Conveyor Device

All you need to transport powder is "compressed air"! Introducing Germany's cutting-edge technology!

The "VOLKMANN Vacuum Conveyor" can transport powders using only "compressed air." Even those who are concerned that "the existing space is not very large..." need not worry. Its compact design allows for easy installation. It is also suitable for those troubled by environmental issues and health risks due to dust, as its sealed structure prevents dust generation and improves the working environment. Additionally, it avoids the risk of dust explosions caused by electrical sparks, providing everyone with safe and secure powder transportation. 【Features】 ■ Easy installation due to compact design ■ Completely air-operated, eliminating ignition sources (ATEX certified) ■ Sealed structure prevents dust generation and improves the working environment ■ Transport without damage using suction plug transport ■ Easy to clean and hygienic ■ Quick and easy disassembly without tools *For more details, please refer to the PDF materials or feel free to contact us.

• Food Conveyor Equipment
• Conveyor
• Powder Conveyor Device

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

Fukuda's new flagship model. - Masterless type (FLA-0200 series) - General type (FLA-0201 series) Two models of air leak testers. With the mastering correction function, high-precision measurements can be achieved in a short time. Please take a look at the catalog.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

In facilities operating nurse call systems, we have made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call system. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. This helps prevent accidents caused by falls, slips, or wandering, contributing to the efficiency of medical operations. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call system. ○ Up to 5 transmitters can be registered with a single receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.