Notice of Participation in "InterAqua 2026 17th Comprehensive Water Solutions Exhibition"

A rich selection of pipes, fittings, and irregular pipes allows for detailed responses to user needs!

The WE pipe is a single-layer pipe made of high-density polyethylene, available in sizes that conform to ISO standards. Nominal diameter: W150 to W1500 【Features】 ○ Good results were obtained in the JWWA K-14-2017 chlorine water resistance test. ○ It applies the international standard ISO4427, which originated in Europe, where the penetration rate of polyethylene pipes is the highest in the world. This allows for the use of a wide variety of fittings. ○ Made from black high-density polyethylene with excellent weather resistance, making it suitable for exposed piping. ○ The delivery of long pipes enables labor-saving construction and shortening of construction periods, leading to cost reductions. ○ Particularly in the field of large-diameter piping, our WE not only provides product supply but also has extensive experience in engineering and piping installation work. ○ Polyethylene pipes are flexible and have excellent seismic resistance. ● Public Interest Incorporated Foundation Japan Sewage Works New Technology Organization Construction Technology Examination Certificate Applicable pipe types: WE-13.6, WE-11, WEETAX-11 / Applicable nominal diameters: W150, W200, W250, W300

• Piping Materials

A rich selection of pipes, fittings, and irregular pipes allows for detailed responses to user needs!

WED pipes are dual-layer pipes made of high-density polyethylene, available in sizes that conform to ISO standards. Nominal diameter: W40 to W350 【Features】 ○ It applies the international standard ISO4427, which originated in Europe, where the penetration rate of polyethylene pipes is the highest in the world. This allows for the use of a wide variety of fittings. ○ Made from black high-density polyethylene with excellent weather resistance, making it suitable for exposed piping. ○ Pipes with a nominal diameter of W100 or less can be delivered in long lengths (tab-wound). ○ The delivery of long-length pipes can reduce labor and shorten construction time, leading to cost savings. ○ Polyethylene pipes are flexible and have excellent seismic resistance.

• Piping Materials

Long-length delivery and flexibility enable shortened construction periods! With excellent heat resistance, abrasion resistance, and chemical resistance, we have numerous achievements in heat supply piping and chemical piping for factories!

PXE is a pipe made of cross-linked polyethylene with excellent chemical properties. Nominal diameter: 25 to 250 Maximum operating temperature: 95°C 【Features】 - Pipes with a nominal diameter of W100 or less can be delivered to the site as long-length pipes (tab wrapped). - The use of long-length pipes can reduce labor and shorten construction time, leading to cost savings. - They are flexible and can be extended while bending. - Ideal for soft ground such as marshy areas and reclaimed land, and they also have excellent seismic resistance. - They have excellent corrosion resistance and chemical resistance, and due to the addition of carbon black, they also have excellent weather resistance, making them suitable for exposed piping. - They use cross-linked polyethylene EF sockets for connecting joints, eliminating concerns about corrosion. - Their excellent wear resistance makes them suitable for transporting soil and slurry.

• Piping Materials

Lightweight, long-length, high strength, and excellent insulation performance! It is a high-performance freeze prevention pipe!

GNGWDA is increasingly being adopted for bridge attachments and suspended piping due to its unique characteristics of lightweight, flexibility, and earthquake resistance that are not found in other types of pipes. Nominal diameter: W40 to W100 (The conduit dimensions conform to ISO standards.) 【Features】 ○ The composite pipe structure of polyethylene and aramid fibers provides high internal pressure strength, and the corrugated steel pipe structure protects against external pressure. ○ The rigid polyurethane insulation layer prevents the freezing of fluids inside the conduit. ○ Pipes with a nominal diameter of W100 or less can be delivered to the site as long-length pipes (tab-wound). ○ The use of long-length pipes allows for labor-saving in construction and shortening of construction periods, leading to cost reductions. ○ They are long and highly flexible, allowing for bending while extending the pipe. ○ They are ideal for soft ground such as marshy areas and reclaimed land, and they also excel in earthquake resistance. ○ The outermost layer is coated with low-density polyethylene with added carbon black, providing excellent weather resistance and corrosion resistance, making it suitable for exposed pipes. ○ The EF fusion and automatic butt fusion create a reliable pipeline with a unified structure. ○ It possesses sufficient weather resistance and internal and external pressure strength as a bridge attachment pipe.

• Piping Materials

Lightweight, long-length, high strength, and excellent insulation performance! It is a high-performance freeze prevention pipe!

GNGWA is increasingly being adopted for bridge attachments and suspended piping due to its unique characteristics of lightweight, flexibility, and earthquake resistance that are not found in other types of pipes. Nominal diameter: 150S to 250S (The conduit dimensions adhere to ISO standards.) 【Features】 - The composite pipe structure of polyethylene and aramid fibers provides high internal pressure strength, and the corrugated steel pipe structure protects against external pressure. - The rigid polyurethane insulation layer prevents the freezing of fluids inside the conduit. - Pipes with a nominal diameter of W100 or less can be delivered to the site as long-length pipes (tab-wound). - The use of long-length pipes allows for labor-saving in construction and shortening of construction periods, leading to cost reductions. - The long length and excellent flexibility allow for bending while extending the pipe. - It is ideal for soft ground such as marshy areas and reclaimed land, and it also excels in earthquake resistance. - The outermost layer is coated with low-density polyethylene containing carbon black, which provides excellent weather resistance and corrosion resistance, making it suitable for exposed pipes. - Through EF fusion and automatic butt fusion, it creates a reliable pipeline with a unified structure. - It has sufficient weather resistance and internal and external pressure strength as a bridge attachment pipe.

• Piping Materials

Solving issues such as scale adhesion, corrosion, and heat loss due to water quality! Numerous achievements in hot spring piping and heat supply piping!

GNGAR is an insulated structure pipe primarily used for hot springs and hot water. Nominal diameter: 25–200 Maximum operating temperature: 95℃ 【Features】 ○ The conduit uses cross-linked polyethylene, which has characteristics such as heat resistance and chemical stability. ○ The use of EF sockets made of cross-linked polyethylene eliminates concerns about corrosion, similar to traditional metal fittings. ○ It is a long pipe that has been consistently processed for insulation, installation, and corrosion prevention in the factory. ○ Pipes with a nominal diameter of 100 or less can be delivered to the site as long pipes (tab-wound). ○ The introduction of long pipes allows for labor-saving in construction and shortening of construction periods, leading to cost reductions. ○ It is long and highly flexible, allowing for extension while bending. ○ It is ideal for exposed piping in mountainous areas and for soft ground such as marshes and reclaimed land, and it also has excellent seismic resistance. ○ The outermost layer is coated with low-density polyethylene with added carbon black, providing excellent weather resistance and corrosion resistance.

• Piping Materials

Excellent heat resistance and insulation! We can offer a wide range of fittings thanks to ISO standard conduits!

GNGRT is an insulated pipe primarily used for hot springs and hot water. Nominal diameter: W25 to W250S Maximum operating temperature: 80°C 【Features】 ○ The conduit is made from high heat-resistant polyethylene, which has characteristics such as heat resistance and chemical stability. ○ The use of EF sockets made from high heat-resistant polyethylene eliminates concerns about corrosion, similar to traditional metal fittings. ○ It is a long pipe that has undergone consistent processing for insulation, installation, and corrosion prevention within the factory. ○ Pipes with a nominal diameter of 100 or less can be delivered to the site as long-length pipes (tab-wound). ○ The introduction of long-length pipes allows for labor-saving in construction and shortening of construction periods, leading to cost reductions. ○ The long-length pipes are highly flexible and can be extended while bending. ○ They are ideal for exposed piping in mountainous areas and for soft ground such as marshes and reclaimed land, and they also excel in earthquake resistance. ○ The outermost layer is coated with low-density polyethylene containing carbon black, which provides excellent weather resistance and corrosion resistance.

• Piping Materials

A composite pipe reinforced with fibers that can withstand use under harsh conditions!

WEETDA enhances internal pressure strength and suppresses creep by wrapping aramid fibers around a high-density polyethylene double-layer pipe, creating a composite structure. Operating Pressure Nominal Diameter (Conduit dimensions are based on ISO standards.) 〇WEETDA-13.6 1.0MPa W40～W100 〇WEETDAX-13.6 1.5MPa W40～W100 〇WEETDAY-11 2.0MPa Please contact us for details. 【Features】 ○ The use of long pipes reduces labor and shortens construction time, allowing for cost savings. ○ It has excellent flexibility and can be extended while bending. ○ The outer layer is coated with low-density polyethylene containing carbon black, providing excellent weather resistance and corrosion resistance. ○ By using fittings of the same material and applying EF fusion and automatic butt fusion, it creates a highly reliable pipeline with a monolithic structure.

• Piping Materials

A composite pipe reinforced with fibers that can withstand use under harsh conditions!

By wrapping aramid fibers around high-density polyethylene conduits and creating a composite structure, we enhance internal pressure strength and suppress creep. Operating Pressure Nominal Diameter (Conduit dimensions follow ISO standards) 〇WEETA-13.6　　1.0MPa　　 W150S～W600 〇WEETAX-13.6　 1.5MPa　　 W150S～W400 〇WEETAY-11　　 2.0MPa　　 Please inquire 【Features】 ○ The delivery of long pipes enables labor-saving construction and shortens construction periods, allowing for cost reduction. ○ Excellent flexibility allows for bending while extending the pipe. ○ The outermost layer is coated with low-density polyethylene containing carbon black, providing excellent weather resistance and corrosion resistance. ○ By using the same material for joints and employing EF fusion and automatic butt fusion, a reliable pipeline with an integrated structure is achieved. ● Certification from the Japan Fire Equipment Safety Center for fire extinguishing equipment 　Certification Number PL-022 　Applicable Pipe Types: WEETA-13.6 / Applicable Nominal Diameters: W75, W100, W150, W150S ◎ For nominal diameters below W100, please refer to the WEETDA page.

• Piping Materials

Our company will be exhibiting at the "16th Advanced Functional Materials Week Tokyo" held at Makuhari Messe, specifically at the "8th Coating Japan: Paints and Coating Equipment Exhibition." This exhibition is a specialized event where functional paints, coating equipment, surface treatment technologies, and more will be showcased all in one place. A wide range of engineers from industrial fields such as electronics and automotive to architecture and building materials will be in attendance. At this exhibition, you can discover new products and technologies, consult directly with engineers, discuss estimates and implementation timelines, and learn about industry trends. We sincerely look forward to your visit.

■Accelerating Next-Generation Polymer Design: Digital Chemistry Platform■ With the evolution of molecular simulation technology, we have entered an era where phenomena at the atomic and molecular levels can be reproduced and analyzed on computers. Furthermore, by combining this with machine learning, it has become possible to achieve high-precision material predictions and designs even with limited experimental data. Schrödinger strongly supports the enhancement of your analytical capabilities and the efficiency of research and development through cutting-edge molecular simulation and AI/ML technologies, as well as our unique digital platform that integrates these technologies. At this exhibition booth, our specialized staff will clearly introduce an overview of these technologies and case studies, and will also answer any questions you may have. *During the exhibition, we will hold a seminar at our booth. Location: Our exhibition booth Theme: Accelerating Next-Generation Polymer Material Development with Machine Learning and Atomic-Level Simulation 【Exhibition Information】 Exhibition Name: 14th High-Performance Plastics Exhibition within High-Functionality Materials Week Dates: November 12 (Wednesday) to 14 (Friday), 2025, 10:00 AM to 6:00 PM (ends at 5:00 PM on the last day) Venue: Makuhari Messe Halls 1-3 Booth Number: 15-10

We will showcase flexible busbars that can also be used in vehicles. Additionally, we will display various power supplies for precision welding machines, as well as automatic machines and processing electrodes.

NVIDIA, a partner company of ADLINK Japan, will hold the "Latest Technology Session by NVIDIA Partners" at the 2025 Japan IT Week [Autumn], where ADLINK Japan's Kiuchi will present on the theme "Introduction to Embedded AI Solutions for TCO Reduction." This is an open seminar that is free and does not require prior registration, so please join us.

This exhibition is one of the largest comprehensive exhibitions for embedded and edge technology in Japan, focusing on design philosophy based on AI, secure by design, and building resilient supply chains. It provides an overview of the entire embedded ecosystem, covering everything from institutional and market trends to on-site implementation, allowing attendees to experience the forefront of transformation in embedded technology. At the D-Link booth, we will introduce our "4G/5G M2M products," which can be widely used from offices and stores to embedded devices, factory equipment, and in-vehicle systems, along with the cloud management platform "D-ECS" that streamlines operations after implementation. We will also showcase the "DIS series," an industrial switch with excellent durability, featuring a wide operating temperature range from -40°C to 75°C and compliance with IP protection ratings.