An introduction article about "@mobi" has been published in Robot Digest.

An intuitively operable interface! Reducing the development costs of autonomous mobile robot systems!

"@mobi" is a software package that enables the functionality of autonomous mobile robots, reducing the development costs of such robots. It can be applied to robots of various shapes, sizes, and drive methods, achieving high-precision control both indoors and outdoors, as well as on uneven terrain. In addition to the standard specification package, we can also kit it for your transport carts. For example, by incorporating it into an Automated Guided Vehicle (AGV), you can develop an Autonomous Mobile Robot (AMR). 【Features】 ■ High customization capabilities - Kitting for customer controllers is also possible - REST API is available, allowing for the creation of unique customer applications ■ Easy operation - Automatic route generation and combined route settings with virtual lines are possible ■ Compatible with a wide variety of autonomous mobile robots - Environments: factories, indoors, outdoors, uneven terrain, etc. - Shapes: wheels, crawlers, independent two wheels, steering, etc. ■ Reliable support - Our experienced engineering team supports the realization of your systems * A renewed promotional video is currently available for free! * For more details, please access the "Related Links" below, and be sure to check it out.

• Software (middle, driver, security, etc.)

High-reliability wireless transmission and reception device compliant with ISO13849-1! Control from long distances using the 920MHz band.

The product is a wireless transmission and reception device "@seguro wes" that complies with functional safety standards enabling safe wireless emergency stops. It can be used in combination with either a contact transmitter that connects to safety devices such as waterproof, rechargeable remote controls, light curtains, and door switches, or a receiver installed on the machine to be stopped. It is suitable for installation in locations away from the main unit or outdoors, and antenna separation is also possible. 【Reasons to Choose This Product】 ■ Obtained ISO 13849-1 conformity certification from the Japan Quality Assurance Organization ■ High-reliability abnormal monitoring functions such as wireless communication interruption monitoring and power supply monitoring to prevent loss of stop control ■ Wireless communication in the 920MHz band allows for minimal interference and control from long distances ■ Built-in relay for emergency stop makes it easy to implement wireless emergency stops for various devices ■ Relay devices enable expansion of communication areas and countermeasures for dead spots in radio waves *If you wish to request a free rental, please feel free to contact us. *For more details, please refer to the PDF materials. Inquiries are also welcome.

• Communications

@mobi has significantly upgraded its features! It has become easier to use.

@mobi is an all-in-one software package that integrates all the necessary functions for autonomous mobile robots. By combining sensors, controllers, and smartphone applications, it can be easily incorporated into existing robots to achieve autonomous movement immediately. A new version, @mobi 2.6, will be released in October 2025. It features a variety of updates focused on "ease of use in the field." Making the introduction of automated transport simpler and smarter. Please feel free to contact us.

• Transport and handling robots

Enabling autonomous movement in high-difficulty environments! Customizable proprietary SLAM software tailored to the environment, vehicle characteristics, and use cases.

This product is a 3D-LiDAR SLAM software that achieves both matching performance and lightweight, high-speed operation, even in low-feature environments. Our unique algorithm mitigates the accuracy degradation issues of conventional technologies in "high-speed driving," "vehicle slip," and "early-stage map creation." It prevents self-position loss and creates high-quality maps. This SLAM software, which has a proven track record and high environmental robustness, is also integrated into our "Autonomous Mobility Software Package @mobi," making it easy to configure autonomous mobility applications. 【Features】 - Operates using scan point clouds from LiDAR, depth cameras, etc., along with vehicle information as input. - Reduces dependency on robots and sensors, allowing integration into existing systems. - Compatible with major 2D/3D LiDARs, and can be combined with IMUs and cameras for higher accuracy, enabling sensor selection based on cost and system requirements. - Customizable according to environmental, vehicle characteristics, and use cases. - Options for 2D and 3D versions based on the applicable system. - Low dependency on OSS, with proprietary algorithms validated for lightweight operation (capable of running on embedded PC specifications). *For more details, please feel free to contact us.

• Embedded system design service
• Software (middle, driver, security, etc.)
• Other embedded systems (software and hardware)

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.

Are you struggling to explain "safety" to the client using just drawings? - The risks in blind spots are difficult to convey to the client through drawings alone. - Safety measures often become a target for cost reduction, making it hard to communicate their necessity. - There is a concern that the client might say, "It's more dangerous than I thought," after completion. Risks that are visible to design professionals are not easily understood intuitively by clients who are outside the field. This document is not just a simple explanation of sensor functions; it is a guide to visually explain "why sensors are necessary in that location." It can be used directly as explanatory material for the client. Here are three key points for utilizing this document: 1. Visualization of Risks Blind spots during vehicle departure and contact risks within the site are illustrated clearly. 2. Clarification of Selection Criteria A comparison table outlines the differences between complex sensor types such as infrared, ultrasonic, and loop coils. 3. Diagram of System Configuration It illustrates not just the sensors alone, but how they combine with components like rotating lights and control panels, providing practical assistance for electrical equipment design. Please make use of this to prevent "rework after completion" and "accident risks."

In facilities operating nurse call systems, we have made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call system. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. This helps prevent accidents caused by falls, slips, or wandering, contributing to the efficiency of medical operations. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call system. ○ Up to 5 transmitters can be registered with a single receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.