Functional safety compliant wireless emergency stop device '@seguro wes'
AT-SW2C1/AT-SW2T1/AT-SW2T2/AT-SW2R1/AT-SW2R2/AT-SW2P1/AT-SW2P2
High-reliability wireless transmission and reception device compliant with ISO13849-1! Control from long distances using the 920MHz band.
The product is a wireless transmission and reception device "@seguro wes" that complies with functional safety standards enabling safe wireless emergency stops. It can be used in combination with either a contact transmitter that connects to safety devices such as waterproof, rechargeable remote controls, light curtains, and door switches, or a receiver installed on the machine to be stopped. It is suitable for installation in locations away from the main unit or outdoors, and antenna separation is also possible. 【Reasons to Choose This Product】 ■ Obtained ISO 13849-1 conformity certification from the Japan Quality Assurance Organization ■ High-reliability abnormal monitoring functions such as wireless communication interruption monitoring and power supply monitoring to prevent loss of stop control ■ Wireless communication in the 920MHz band allows for minimal interference and control from long distances ■ Built-in relay for emergency stop makes it easy to implement wireless emergency stops for various devices ■ Relay devices enable expansion of communication areas and countermeasures for dead spots in radio waves *If you wish to request a free rental, please feel free to contact us. *For more details, please refer to the PDF materials. Inquiries are also welcome.
Inquire About This Product
Related Videos
basic information
【Common】 ■ Uses a wireless frequency of 920MHz band ■ Communication distance is 300m in line of sight ■ Multiple receivers can be controlled from a single transmitter (remote control / contact transmitter) 【Remote Control AT-SW2C1】 Image 2 ■ Waterproof and dustproof performance is IP65 ■ Built-in rechargeable battery with continuous operating time of approximately 39 hours ■ Equipped with an emergency stop button ■ Contains 3 general-purpose buttons 【Contact Transmitter AT-SW2T1/AT-SW2T2】 Images 3, 4 ■ Available in two types: integrated and separated ■ Power supply supports 12V and 24V systems ■ Emergency stop input can connect safety devices such as light curtains and emergency stop buttons ■ Provides 3 general-purpose inputs 【Receiver AT-SW2R1/AT-SW2R2】 Images 5, 6 ■ Available in two types: integrated and separated ■ Power supply supports 12V and 24V systems ■ Emergency stop output is redundant with 2 relay contacts ■ Provides 3 general-purpose outputs 【Repeater AT-SW2P1/AT-SW2P2】 Images 7, 8 ■ Available in two types: integrated and separated ■ Power supply supports 12V and 24V systems ■ Can relay up to a maximum of 3 stages
Price information
You can purchase from one unit. When placing an order, please specify the model number and quantity, and if it is a separate type, please indicate the cable length. We accommodate various sales channels, including direct sales. For details, please contact our company.
Price range
P3
Delivery Time
P3
※If in stock (please note that if cable length customization is required, it may take about one month).
Applications/Examples of results
【Applicable System Examples】 ■ Industrial Equipment ⇒ Wireless emergency stop signals for factory lines and indoor equipment ■ AGV/AMR ⇒ Emergency stop for unmanned vehicles autonomously navigating within factories ■ Automated Construction and Agricultural Machinery ⇒ Research and development of construction and agricultural machinery with autonomous movement and remote control ■ Service Robots ⇒ Research and development of autonomous mobile robots equipped with arms ■ Small Autonomous Mobile Robots ⇒ Prototyping and research and development of small robots and service robots that autonomously navigate outdoors ■ Large Autonomous Mobile Vehicles ⇒ Prototyping and development of large vehicles and large AGVs that autonomously navigate outdoors, etc. 【Use Cases You Are Utilizing】 ■ Emergency stop when unexpected behavior occurs during the prototyping and development of autonomous mobile robots (including prototyping and development in universities and research institutions, automation of construction machinery, dump trucks, excavators, and heavy load transport vehicles) ■ Emergency stop during the development and operation of AMRs/AGVs in factories coexisting with humans ■ Sending emergency stop signals from a distance when there is no emergency stop button nearby on a long manufacturing line ■ Ability to stop and control testing equipment from inside the vehicle during environmental testing of the vehicle
Line up（8）
| Model number | overview |
|---|---|
| AT-SW2C1 | Remote control |
| AT-SW2T1 | Integrated contact transmitter |
| AT-SW2T2 | Separate type contact transmitter (standard cable length: 5m) *Cable length can be customized up to a maximum of 15m. |
| AT-SW2R1 | Integrated receiver |
| AT-SW2R2 | Receiver separation type (standard cable length: 5m) *Cable length can be customized up to a maximum of 15m. |
| AT-SW2P1 | Integrated repeater |
| AT-SW2P2 | Relay-type separation (standard cable length: 5m) *Cable length can be customized up to a maximum of 15m. |
| AT-SW1 Series | Newly designed items not recommended for purchase *Available for purchase only to customers who have purchased in the past. |
catalog（6）
Download All Catalogs
CAD data（3）
| Model number | overview | File |
|---|---|---|
| @seguro-wes_Wireless Emergency Stop Device-CAD_Remote_AT-SW1C1-20240607 | The dimensions of the following model numbers are the same, so please refer to this one. Remote control: AT-SW2C1, AT-SW1C1 |
|
| @seguro-wes_Wireless Emergency Stop Device-CAD_Receiver Integrated_AT-SW1R1-NZ-20240607 | The dimensions of the following model numbers are the same, so please refer to this. Integrated receiver: AT-SW2R1, AT-SW1R1-NZ Separated receiver (main unit): AT-SW2R2A, AT-SW1R2A-NZ Integrated contact transmitter: AT-SW2T1, AT-SW1T1 Separated contact transmitter (main unit): AT-SW2T2A, AT-SW1T2A Integrated repeater: AT-SW2P1 Separated repeater (main unit): AT-SW2P2A |
|
| @seguro-wes_Wireless Emergency Stop Device-CAD_Receiver Separation Type (Antenna Section)_AT-SW1R2B-20240607 | The dimensions of the following model numbers are the same, so please refer to this. Receiver separation type (antenna part): AT-SW2R2B, AT-SW1R2B Contact transmitter separation type (antenna part): AT-SW2T2B, AT-SW1T2B Repeater separation type (antenna part): AT-SW2P2B |
|
News about this product（3）
Company information
We are a design company specializing in the development of devices, systems, and services utilizing in-vehicle software, IoT, and robotics technologies. Leveraging our software development capabilities, we provide comprehensive support from pioneering research and prototype development to mass production. The foundation of our efforts is "realizing the value that our client companies seek." With this commitment, we work together with our clients to create a safe, secure, comfortable, and convenient society.