AAEON NVIDIA Jetson AGX Orin equipped industrial AI edge PC with Jetpack 6.0.

AAEON NVIDIA Jetson AGX Orin equipped industrial AI edge PC with Jetpack 6.0.

Features: ● Equipped with Jetson AGX Orin 32GB/64GB ● Gigabit LAN ×1, 10Gigabit LAN ×1 ● USB 3.2 Gen 2 (Type-A) ×4 ● DB-9 connector ×1 (for DIO 8 channels) ● DB-9 connector ×2 (supports RS-232/422/485: Rx/Tx/RTS/CTS) ● Jetpack 6.0.0 pre-installed

• Industrial PCs

Features: ● Equipped with NVIDIA Jetson Orin NX ● Supports JetPack 6.2 Super mode ● 8GB/16GB LPDDR5 onboard memory ● USB 3.2 Gen 2 x 4 ● RS232 x 1 ● 10-pin header DIO ● Expansion: M.2 2230 E-Key x 1, M.2 3052 B-Key x 1

Features: ● Equipped with Jetson AGX Orin 32GB/64GB ● Gigabit LAN ×1, 10Gigabit LAN ×1 ● USB 3.2 Gen 2 (Type-A) ×4 ● DB-9 connector ×1 (for DIO 8 channels) ● DB-9 connector ×2 (supports RS-232/422/485: Rx/Tx/RTS/CTS) ● Pre-installed with Jetpack 6.0.0

Features: ● NVIDIA Jetson Orin NX 8GB/16GB ● Fanless design ● 8GB/16GB onboard memory ● PoE/PSE GbE LAN x 8 * 4 ports of PoE share one MAC address and Giga bandwidth * Supports a total of 120W PoE with input of 24V or higher, 80W PoE with input of 12-24V, and 80W PoE with input of 12V or lower. ● Giga LAN x 2 ● Supports 9V-36V DC input and can also accommodate ACC ignition delay On/Off ● Jetpack 6.0.0 pre-installed

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without any thermal impact on the base material. Repairs can be conducted in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is required, please contact us.