Notice of Change in Drentrap Model

Only the drain is reliably discharged using Fukuhara's technology! It will significantly save energy.

The "Drex 150" is a drain trap suitable for air dryers, after coolers, and air filters. It resolves issues such as "air leakage" and "no drain discharge" that occur with float-type drain traps and disc-type drain traps equipped in refrigerated air dryers. It is compatible with compressors up to 150 kW and is energy-efficient. 【Features】 ■ Minimal air loss ■ No need for settings on drain discharge cycles or discharge times ■ Only drains when the sensor detects ■ Drains while the manual button is pressed ■ The strainer is built into the union for easier cleaning *For more details, please refer to the PDF document or feel free to contact us.

• Other environmental equipment

The compressor starts under light load! Available in high voltage (AC400V) specifications and cold climate specifications.

We would like to introduce the "Single Trap" that we handle. At the end of work, when the compressor switch is turned OFF, all drain and air are released. The compressor starts the next morning with a light load. This perfectly aligns with the compressor manufacturers' instruction to "drain at the end of work." It is an extremely effective product. 【Features】 ■ Applicable compressors: 0.2 to 11 kW ■ Available in high voltage (AC400V) specifications and cold climate specifications ■ The compressor starts the next morning with a light load *For more details, please refer to the PDF document or feel free to contact us.

• Gas recovery/treatment equipment

The drain discharge time is variable and can be adjusted according to the amount! The compressor starts under light load.

The "Double Trap" is a drain trap that combines the excellent features of single traps and auto air traps. During compressor operation, it regularly and reliably discharges the drain, and when the compressor switch is turned OFF, it releases both the drain and air. The compressor starts the next morning with a light load. The drain discharge time is variable and can be adjusted according to the amount of drain. 【Features】 ■ Applicable compressors: 2.2 to 37 kW ■ Regularly and reliably discharges the drain during compressor operation ■ Releases drain and air when turned OFF ■ Variable drain discharge time ■ Adjustable according to the amount *For more details, please refer to the PDF document or feel free to contact us.

• Gas recovery/treatment equipment

Applicable compressors from 0.75 to 37 kW! During compressor operation, regularly and reliably discharge the drain.

We would like to introduce our "Auto Air Trap." During compressor operation, it reliably and frequently discharges condensate. The discharge time is adjustable and can be modified according to the amount of condensate. Additionally, we offer high voltage (AC400V) specifications and cold climate specifications. Please feel free to contact us if you have any requests. 【Features】 ■ Applicable compressors: 0.75 to 37 kW ■ Adjustable discharge time ■ Can be adjusted according to the amount of condensate *For more details, please refer to the PDF document or feel free to contact us.

• Gas recovery/treatment equipment

Best-selling product of the drain trap! Applicable compressors 0.4 to 22 kW.

We would like to introduce our "Electronic Trap." It can be installed regardless of whether it is a pressure switch type or an unloader type. It reliably and frequently discharges condensate during compressor operation. Additionally, the discharge time is adjustable and can be modified according to the amount of condensate. Please feel free to contact us if you have any requests. 【Features】 ■ Available in high voltage (AC400V) specifications and cold climate specifications ■ Applicable compressors: 0.4 to 22 kW ■ Can be installed regardless of whether it is a pressure switch type or an unloader type *For more details, please refer to the PDF document or feel free to contact us.

• Gas recovery/treatment equipment

Easy to understand operational status with a large action lamp! Applicable compressors from 0.4 to 37 kW, energy-saving compatible.

We would like to introduce "Electronic Trap II," which we handle. The drain discharge time is variable and can be adjusted according to the amount of drain. It reliably discharges the drain frequently during compressor operation. Additionally, the discharge cycle and discharge time can be easily adjusted with a knob, and it can be installed regardless of whether it is a pressure switch type or an unloader type. 【Features】 ■ Applicable compressors: 0.4 to 37 kW, energy-saving compatible ■ Large operation lamp makes it easy to understand the operating status ■ Easy adjustment of discharge cycle and discharge time with a knob ■ Available in high voltage (AC400V) specification, high pressure (4.9MPa) specification, and cold climate specification *For more details, please refer to the PDF document or feel free to contact us.

• Other environmental equipment

Super powerful type! The operation lamp has been enlarged, making the operational status easier to understand.

We would like to introduce the "Super Trap" that we handle. It is suitable for discharging drains that have a high viscosity, similar to heavy oil, and are prone to sludge inflow, such as aftercooler drain separators, air tanks, and dryer air filters for medium to large compressors. Since it does not come equipped with a strainer, the risk of discharge failure due to clogging is minimal. 【Features】 ■ The sensor detects the drain and discharges any remaining drain (sensor-equipped model) ■ Enlarged operation lamp ■ Knob-type adjustment for discharge cycle and discharge time ■ Unified frequency ■ Applicable compressors: 22 to 220 kW, energy-saving compatible *For more details, please refer to the PDF document or feel free to contact us.

• Other environmental equipment

Equipped with a powerful motor valve! Reliable, high trustworthiness, and strong against high viscosity scales.

We would like to introduce the "Ultra Trap" that we handle. This trap features smooth and reliable valve operation with high reliability, and it is resistant to high-viscosity scale. It is ideal for draining aftercoolers, drain separators, air tanks, and dryer air filters for medium to large compressors. Since it does not come equipped with a strainer, the risk of discharge failure due to clogging is minimal. 【Features】 ■ Equipped with a powerful motor valve ■ Applicable compressors: 22–500 kW, energy-saving compatible ■ Minimal risk of discharge failure due to clogging ■ Time setting is easy with a knob-style adjustment *For more details, please refer to the PDF document or feel free to contact us.

• Other environmental equipment

The pinhole inspection for packaging engineering is fully automated, eliminating packaging defects based on certain quality standards. The judgment results and operational status can be managed via a monitor screen. - Quantitative management of quality standards for the pinhole inspection process - Ensuring the quality of the product's shelf life - Establishing evaluation criteria for the manufacturing process, achieving quantitative quality assurance - Slim and space-saving design that can be connected to existing production lines - Quick changeover for product variety switching can be handled in a short time by exchanging chambers - Fully domestically produced, allowing for rapid maintenance and troubleshooting - Example target works: pillow packaging, packaged rice (packaged cooked rice), etc. *Please consult us regarding the use of this product for pharmaceuticals.

● What is a pneumatic regulator? It is a self-developed pneumatic regulator with a control reproducibility of ±0.1%. We offer a wide range of products from low flow to high flow. ● What is a regulator? Please use it to adjust the test pressure for leak testing. By supplying a stable test pressure, it enables more accurate measurements.

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

The "Dubhe" series from OtO Photonics is a spectrometer developed for OCT (Optical Coherence Tomography) applications. It has a spectral range of 800 to 880 nm, a body size of 180 (L) x 120 (W) x 63 (H) mm, and a high resolution of 0.04 nm (with a slit width of 5 µm). There are two models available that support CMOS camera line rates of 80 kHz and 20 kHz. It achieves micrometer resolution and captures depths of a few millimeters. This spectrometer is ideal for integration into OCT devices. Please contact us if you would like to evaluate a demo unit.

Fukuda's new flagship model. - Masterless type (FLA-0200 series) - General type (FLA-0201 series) Two models of air leak testers. With the mastering correction function, high-precision measurements can be achieved in a short time. Please take a look at the catalog.