The SIRC sensor dedicated smartphone app is now compatible with iPhone.

No electrical work required! Just clamp onto two wires to visualize power!

■ Non-contact IoT power sensor unit that can be installed on three-phase three-wire and single-phase three-wire/two-wire systems. By simply attaching it to two of the three wires (for single-phase two-wire, the L/N two wires), it measures the active power including power factor. Utilizing Bluetooth wireless technology and powered by a lithium battery, it operates for approximately three years. It can be installed not only in factory cubicles but also in distribution boards and panel boards, enabling power measurement for each manufacturing line and equipment. No electrical or wiring work is required, making it easy to visualize active power. ■ Accurate understanding of power consumption through power factor detection. Typical clamp-on type power meters calculate power values by multiplying the measured current value by fixed voltage and power factor values. However, the SIRC IoT power sensor unit can detect the power factor. By multiplying the measured current value by the detected power factor simultaneously, it accurately determines the active energy consumption. For companies and factories, understanding the current accurate power consumption is essential for efforts towards carbon neutrality. The SIRC IoT power sensor unit allows for accurate measurement of power consumption, enabling effective CO₂ reduction (decarbonization) measures.

• Power meter

The world's first! Visualizing power consumption in just 15 seconds with one touch.

The IoT power sensor unit is a "retrofit" power sensor that requires no electrical work or equipment downtime and can be installed in just 15 seconds. It can measure the power consumption of each piece of equipment in real-time, and it also non-contact measures the "power factor," which indicates how effectively the supplied power is being used. It simplifies the visualization of previously hard-to-see power waste and imbalances. Its ease of installation and high measurement accuracy without power factor errors have been recognized, earning it the 2024 Energy Conservation Award. 【Features】 ■ Easy installation in 15 seconds Simply clamp it onto two of the three wires of a single-phase system or two wires of a single-phase system. It can be installed without stopping the equipment. ■ Non-contact measurement of "power factor" With a unique algorithm, it can accurately grasp the power factor, which cannot be determined by CT. ■ Wireless and no construction required With Bluetooth transmission and energy-saving design, it operates for about three years on a standard battery. *Based on a communication interval of 10 seconds. ■ Real-time "visualization" It allows for understanding the power consumption of each piece of equipment, leading to the discovery of energy-saving opportunities. *For more details, please refer to the PDF or feel free to contact us.

• Power meter

Realizing Analog DX in Explosion-Proof Areas

We enable the IoT transformation of instruments installed in "explosion-proof" areas, such as chemical plants, where there is a risk of fire and explosion, achieving efficiency in inspection operations and stable operations. We eliminate the cumbersome tasks of directly visually confirming mechanical meter indicators and manually writing down values, allowing for the digital acquisition of indicator values simply by retrofitting existing analog meters like pressure gauges. ■■Product Features■■ - Intrinsically safe explosion-proof structure This is an intrinsically safe explosion-proof structure that can be used in ZONE 1 (hazard level 1 area). - Remote monitoring The values indicated by analog meters are digitized, allowing for remote monitoring and inspection. - Safety measures It reduces inspection work in hazardous locations such as high places and dark areas.

• Other measurement, recording and measuring instruments

Achieve IoT integration simply by retrofitting existing analog meters!

This is a sensor node that can be easily retrofitted to existing mechanical analog single-needle meters (such as pressure gauges and thermometers) to achieve IoT functionality. It contributes to the labor-saving, automation of data acquisition, and reduction of personnel in regular inspection and maintenance tasks. Furthermore, it is well-suited for obtaining digital data from analog instruments as part of digital transformation (DX). - Labor-saving in inspection and maintenance tasks - Automatic acquisition of handwritten input as digital data - Remote monitoring of operational status - Easy retrofitting to existing analog meters

• Other measurement, recording and measuring instruments

Send measurement data from existing equipment via Bluetooth.

Data from production quantity meters and air, liquid, and gas flow meters used on-site will be wirelessly transmitted via Bluetooth to the SIRC cloud or data logger. This allows for centralized management of previously scattered on-site data, promoting energy savings and improving operational efficiency. ~Features~ - One-touch connection with the included terminal block - Selectable power source: battery or external power - Bluetooth transmission of acquired data

• Other measurement, recording and measuring instruments

High-speed model capable of measurement at intervals of 0.2 seconds.

The wired connection enables measurements at intervals of 0.2 seconds. It has become possible to collect power data that changes rapidly, which was previously difficult. This is expected to improve the accuracy of data acquisition and anomaly detection in equipment that involves precise operations, such as processing machines. 【Product Features】 - High-voltage wiring work is not required, making installation easy. It measures detailed data in real-time at 0.2-second intervals. - It is easy to link power consumption to production data, allowing for the calculation of the amount of electricity used for each individual product in the manufacturing process. This enables not only the calculation of carbon footprints but also the planning of power reduction measures such as improving production line processes and reducing standby power.

• Power meter

High-speed model capable of measurement at intervals of 0.2 seconds.

We have achieved measurement at intervals of 0.2 seconds through a wired connection. This enables the collection of power data that changes rapidly over short periods, which was previously difficult, allowing for more accurate data acquisition and improved anomaly detection in equipment that involves precise operations, such as processing machines. 【Product Features】 By connecting to a PLC, it can be integrated into existing data collection systems. High-speed data acquisition is possible through connection with devices that support RS-232C communication, contributing to quality stabilization through processing condition analysis, as well as the detection of previously missed anomalies and the diagnosis of equipment degradation for predictive maintenance.

• Power meter

● The production time for casting prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly creating sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be created in a single molding process. This allows for the verification of multiple types in a short period.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

This time, the ACS-5000 is available as a facial recognition terminal compatible with FaceMe Security's add-on feature "Face Terminal," enabling access control management that combines "advanced anti-spoofing features" with high-speed facial recognition powered by edge AI. ■ Main Features 1. Accelerated Authentication Processing FaceMe Security is optimized for the MediaTek Genio 700's NPU, achieving faster facial recognition processing and reduced CPU load compared to processing solely on the CPU. It ensures stable authentication without delays even during peak times such as clocking in and out, contributing to alleviating congestion. 2. Advanced "Anti-Spoofing" Optimized for the IR + RGB camera mounted on the ACS-5000, it can quickly detect fraudulent authentication using photos, videos, or 3D masks within 0.6 seconds, ensuring reliable identity verification. 3. Door Control Without Additional Equipment FaceMe Security can directly control the digital I/O of the ACS-5000, allowing for the construction of an access control management system without the need for additional equipment. This simplifies system configuration and reduces implementation costs.

This is an air leak tester for battery cases of electric vehicles (EVs). The battery case has the characteristic of being "large with a significant internal volume, and its structure may deform due to internal pressure." As a result, air leak testing generates "noise caused by its large size and capacity" and "noise caused by expansion or deformation due to internal pressurization." To mitigate this noise, this device features a newly developed smoothing function and a linear fitting correction function used in combination during measurement. Additionally, to achieve low-pressure control that is difficult to manage and to expand flow for large volumes, we provide a bypass box (CBU-600) equipped with an electro-pneumatic regulator for precise pressure control and a pressurization valve with a large effective diameter to supply high flow rates. Measurement methods: Work-Work comparison, Work-Master comparison, Fixed Master comparison Measurement pressure range: 10 kPa, 20 kPa, 50 kPa (depending on specifications) Gauge pressure sensor accuracy: ±2% F.S. Differential pressure sensor accuracy: ±0.5% F.S. Group settings: 0 to 31 groups Power supply voltage / Power consumption: AC100 to 240 V / 100 VA

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!