What are the disadvantages of fluorine grease? An explanation of its advantages and precautions.

High heat resistance, high pressure resistance, and excellent chemical resistance universal fluorine grease.

M-MLPT is a multipurpose fluorine grease specifically designed for molds, combining high heat resistance, high chemical resistance, and non-contaminating properties. Its high-performance design, incorporating PTFE (fluoropolymer), excels in sliding performance and lubrication longevity, making it suitable for a wide range of areas such as sliding parts, pins, cores, and slides in resin molding and die-casting molds. It prevents seizing and wear even in high-temperature environments above 200°C, and the risk of resin contamination is extremely low, making it ideal for molds of products where appearance quality is emphasized. ✅ Product Features (M-MLPT) - High heat resistance: Maintains stable lubrication performance even in high-temperature environments of 280°C - High lubricity: Extremely high sliding properties due to the incorporation of PTFE (fluoropolymer) - Non-contaminating: Minimal grease bleeding and discoloration, does not dirty molded products - Chemical resistance: Excellent resistance to solvents, gases, and resin additives - Versatile application: Ideal for sliding parts, slide sections, pins, guides, hinges, etc. - Prevents seizing and wear: Forms a lubricating film even under high loads, extending lifespan - Compatible with various mold materials: Usable with SUS, SKD, aluminum, hard chrome, etc. Widely adopted as a standard grease on-site: Numerous examples of transitioning from initial testing to long-term use.

• Plastic Mould
• Lubricants
• Mold

Next-generation PTFE-based lubricants that challenge high temperature, high vacuum, and corrosive environments.

M-PPT is a PTFE-based fluorine grease designed to withstand harsh conditions such as high temperature, high vacuum, and high corrosion. It has high resistance to acids, alkalis, and organic solvents, providing stable lubrication for extended periods even in severe chemical environments and clean rooms. It can operate at temperatures ranging from -40°C to +250°C (withstanding up to 280°C momentarily) and is highly resistant to evaporation loss and oxidative degradation, making it ideal for equipment and devices that require high reliability. Additionally, it has good compatibility with metals, resins, and rubber, and is used for lubrication and wear resistance in high-temperature engineering plastic components such as PEEK, PPS, and PTFE, as well as for sealing and lubrication of O-rings and gaskets. This grease serves as the "last line of defense" to thoroughly mitigate lubrication issues, from fine mechanisms to heavy machinery components.

• Plastic bearings
• Engineering Plastics
• Lubricants

Reliable in processing environments. PTFE high-temperature lubricant that works even under long hours and high temperatures.

MK-HPT is a high-temperature fluorine grease based on a fully synthetic oil, blended with PTFE micro-powder. It can handle a wide temperature range from -40°C to +240°C, and due to its stable structure, it experiences minimal evaporation or hardening even in high-temperature environments. With the addition of antioxidants and anti-friction agents, it maintains durability and lubrication performance over an extended period. It is ideal for lubricating mold components and precision machinery.

• Engineering Plastics
• bearing
• Lubricants and additives

A strong ally in equipment management. A single tool that works for any material or application.

Lubrication, heat resistance, water resistance, rust prevention. All the performance required on-site, in one product. M-MPT is a multipurpose grease that combines special synthetic oil with ultra-fine particle PTFE. Its versatility allows it to accommodate all types of equipment, regardless of the usage environment, materials, or applications. It is NSF-H1 certified and can be used in food processing machinery. Additionally, it has low separation and degradation, which helps reduce the frequency of replacement and replenishment, contributing to overall cost reduction. This high-performance grease meets all needs for equipment maintenance, process improvement, and safety management.

• Plastic bearings
• Lubricants
• Lubricants and additives

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.

In the field of collaborative robots, there is a demand for reduced startup labor, energy efficiency, and safe yet flexible handling performance. In particular, reliance on compressed air systems and complex wiring and piping can pose challenges during installation and operation. Piab's "piCOBOT Electric for ABB GoFa" is a plug-and-play electric vacuum gripper solution optimized specifically for ABB GoFa. Its all-electric design generates vacuum using only electricity, eliminating the need for compressed air. This enables the creation of a clean, quiet, and energy-efficient collaborative robot cell. Furthermore, by adopting ABB GoFa-specific software plugins, designated cables, and standard ISO machine interfaces, smooth integration into the ABB control environment is possible. This supports rapid startup and stable operation. Read the article here: https://www.piab.com/ja-jp/news/piab-launches-picobot-electric-for-abb-gofa

We have added the DL material "Explained in Manga! Let's Prevent Technical Information Leakage to the Outside with CrackProof Software Protection!" to the DNP Hypertech site. In the manufacturing industry, there is a growing awareness of measures against the leakage of technical information. Many companies seem to have already established sufficient rules and measures for information protection when exchanging data with external parties. However, when it comes to cases where in-house software suffers from cracking (unauthorized analysis and tampering) and information leaks occur, the current measures are still not adequate. We have explained the measures against technical information leakage through software protection in an easy-to-understand manga format. Please take a look.