The email newsletter "Epsilon Communication Issue 52" has been distributed.

Connect to a solar cell and operates at the maximum operating point (Pmax). It can track the maximum power point under various solar illumination, angle, and temperature conditions.

To evaluate the power generation performance of solar cells, it is necessary to actually put the solar cells in a generating state. Without connecting a load, no current will flow, and thus power generation performance cannot be measured. This device consumes the output power by converting it into heat internally when the solar cells are connected. By simply establishing a minimal measurement environment, it is possible to measure the power generation of the solar cells (the device measures voltage, current, and power every second). For tracking the maximum power point, a unique MPPT tracking method is employed, which, in addition to the conventional sequential power comparison (hill climbing method), sweeps the I-V curve output characteristics of the solar cells once per minute to explore the maximum operating point, thereby performing MPPT control. As a result, even when the maximum operating point (Pmax) changes significantly due to sudden weather changes or shading, it continues to track the maximum operating point. Additionally, when combined with a PV analyzer (I-V curve tracer), it is possible to construct a simulated system under load for outdoor exposure tests. This device is used for applications such as confirming domestic power generation amounts for new types of solar cells (perovskite type), vehicle-mounted solar cells, and OEM products.

• Testing Equipment and Devices

It is a switching device used to measure multiple solar cells with a single measuring instrument during outdoor exposure tests and similar applications.

The connection method and number of channels can be adjusted to fit the system, and it will be delivered as a completely custom-made product. ● Capable of switching between 2-wire and 4-wire high voltage DC, with output to I-V curve tracers and PV analyzers, etc. ● Controlled by I-V curve tracers and PV analyzers, measuring each channel based on the set schedule. ● Can be connected to loads such as PCS and MPPT electronic loads.

• others

The pinhole inspection for packaging engineering is fully automated, eliminating packaging defects based on certain quality standards. The judgment results and operational status can be managed via a monitor screen. - Quantitative management of quality standards for the pinhole inspection process - Ensuring the quality of the product's shelf life - Establishing evaluation criteria for the manufacturing process, achieving quantitative quality assurance - Slim and space-saving design that can be connected to existing production lines - Quick changeover for product variety switching can be handled in a short time by exchanging chambers - Fully domestically produced, allowing for rapid maintenance and troubleshooting - Example target works: pillow packaging, packaged rice (packaged cooked rice), etc. *Please consult us regarding the use of this product for pharmaceuticals.

[To the owners of parking lots and parking lot construction companies] "I'm worried about the possibility of colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those facing sidewalks or roadways are particularly prone to dangerous incidents such as collisions with pedestrians or between vehicles. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures at various sites and alerts the surroundings with LED lights and buzzers. The system consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *When using the exit warning system, we kindly ask customers to arrange for the switching power supply (24V), LED rotating light, control panel, circuit breaker, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. [Contents Included] ○ Vehicle Exit Warning System Configuration ○ Comparison Table of Exit Warning Sensors ○ Four Modes ○ Wide Range of Applications ○ Customer Feedback ○ Appearance Diagram / Specifications ◎ For more details, please contact us or download the catalog.

This is an air leak tester for battery cases of electric vehicles (EVs). The battery case has the characteristic of being "large with a significant internal volume, and its structure may deform due to internal pressure." As a result, air leak testing generates "noise caused by its large size and capacity" and "noise caused by expansion or deformation due to internal pressurization." To mitigate this noise, this device features a newly developed smoothing function and a linear fitting correction function used in combination during measurement. Additionally, to achieve low-pressure control that is difficult to manage and to expand flow for large volumes, we provide a bypass box (CBU-600) equipped with an electro-pneumatic regulator for precise pressure control and a pressurization valve with a large effective diameter to supply high flow rates. Measurement methods: Work-Work comparison, Work-Master comparison, Fixed Master comparison Measurement pressure range: 10 kPa, 20 kPa, 50 kPa (depending on specifications) Gauge pressure sensor accuracy: ±2% F.S. Differential pressure sensor accuracy: ±0.5% F.S. Group settings: 0 to 31 groups Power supply voltage / Power consumption: AC100 to 240 V / 100 VA

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed without causing any thermal impact on the base material. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

Fukuda Co., Ltd., which develops, manufactures, and sells leak testing equipment to inspect airtightness and sealing performance, provides a technical document that clearly explains the methods and theories of airtight testing, titled "Technical Manual." We are offering it as a PDF file. Please take this opportunity to download and view it!