Primix Corporation "International Secondary Battery Exhibition - BATTERY JAPAN 2014" Exhibition Information 【Booth Number: W6-46】

[Video available] Enables uniform dispersion in a short time = Supports efficient experiments! A stirrer that achieves a sharp particle size distribution and micronization down to the nanometer scale.

Filmix® is a mixer (dispersion stirring device) for nanoparticle dispersion that achieves sharp particle size distribution and micronization to nanometer sizes, which was difficult with conventional high-speed stirrers. Emulsification and dispersion in seconds significantly shorten research and development time. The 40-L model is a small desktop machine for testing. There are cases where processing that used to take more than half a day for one batch can now be completed in just 30 or 60 seconds, receiving high praise for its extremely fast processing time!

• Emulsifier/Disperser
• Mixer/agitator
• Homogenizer

[Video available] Highly effective in dissolving powders, breaking up lumps, and dispersing! A lab mixer suitable for stirring operations involving powder entrapment, with numerous scale-up achievements.

The Homodisper is a device that simultaneously draws powder into a liquid by the high-speed rotation of its stirring blades and performs the micronization and dispersion of aggregates through the cutting action of the blades. The Homodisper Type 2.5 is a test machine for uniform dispersion and a small-scale production machine. *The Homodisper Type 2.5 appears in the video from 0:11 below.*

• Emulsifier/Disperser
• Mixer/agitator
• Homogenizer

[Video available] Uniform dispersion in a short time! A high-speed stirrer that achieves sharp particle size distribution and micronization down to nanometers (a mixer capable of particle design).

Filmix® is a mixer (dispersion stirring device) for nanoparticle dispersion that achieves sharp particle size distribution and micronization to nanometer sizes, which was difficult with conventional high-speed stirrers. Emulsification and dispersion in seconds significantly shorten research and development time. Model 80 can operate in batch mode for small-scale prototyping and dispersion condition verification, as well as in continuous mode for a fixed amount of prototyping.

• Emulsifier/Disperser
• Mixer/agitator
• Homogenizer

[Video available] An ultra-high-speed multi-stirring system with a maximum rotation speed of 22,000 r/min! It is an emulsification and dispersion testing machine that can accommodate vacuum, continuous, and batch types.

Here are the appealing points of using the Lab Solution® emulsion dispersion testing machine, which is the de facto standard for consolidated evolution! ▼ ▼ ▼ ○ There are plenty of stirring options that can be easily swapped, making it easy to try various configurations during the initial investigation phase. ○ You can select the appropriate model based on the stirring purpose and the processing liquid. ○ The increased motor power allows you to confirm the load condition, providing peace of mind when increasing the rotation speed. Materials that were previously overloaded can be retested. ○ The temperature sensor is standard equipment, and the temperature is displayed on the operation panel. This improves work efficiency compared to testing with a separate thermometer.

• Emulsifier/Disperser
• Mixer/agitator
• Homogenizer

We present a booklet on battery device solutions from Plimix Co., Ltd., the professionals in emulsifiers, dispersers, kneaders, and stirrers!

Can your company meet the rapidly increasing demand for batteries with your facilities? In the current context of rising fossil fuel prices and advancing global warming, batteries that do not emit CO2 are gaining attention as next-generation fuels. By incorporating the continuous dispersion device "Filmix(R)" into the battery production process, we can achieve reduced manufacturing time, improved quality, and lower capital investment costs! To efficiently and maximally provide this technology to our customers, we have gathered experts from various departments to form the Primix Battery Device Solutions Department, PEACE. PEACE conducts consultative sales for battery device manufacturing while also placing specialists in technology development, design, and on-site testing to respond quickly to customer needs. We are also actively disseminating technical information at conferences and other events. If you have concerns related to battery manufacturing, such as wanting to reduce electrical resistance, avoid metal contamination, or produce large quantities at a low cost with minimal investment, please consult Primix PEACE!

• Secondary Cells/Batteries
• Lithium-ion battery
• Mixer/agitator

[Video available] Achieve uniform dispersion in a short time! The smallest model of the Filmix® series, which realizes sharp particle size distribution and nanoscale micronization!

Filmix® is a mixer (dispersion stirring device) that enables sharp particle size distribution and micronization to nanometer sizes, which was difficult to achieve with conventional high-speed stirrers. Emulsification and dispersion in seconds significantly shorten research and development time. The 30-L model is the smallest unit in the Filmix® series. It is well-received as a research tool for scaling up from next-generation material research to mass production. This unit also serves as an optional stirring component for Lab Revolution®, and it can be used by attaching it to an existing Lab Revolution® you may already own.

• Emulsifier/Disperser
• Mixer/agitator
• Homogenizer

[Video available] Enables uniform dispersion in a short time! A particle design mixer (high-speed stirrer) that achieves sharp particle size distribution and micronization down to nanometers.

Filmix® is a mixer (dispersion stirring device) that enables sharp particle size distribution and micronization to nanometer sizes, which was difficult with conventional high-speed stirrers. Emulsification and dispersion in seconds significantly shorten research and development time. The 56-L model is capable of both batch and continuous operation on a tabletop. Once the conditions are set in batch mode, continuous experiments can be conducted by assembling a line. This single unit can be compactly used for everything from research and development to small-scale production!

• Emulsifier/Disperser
• Mixer/agitator
• Homogenizer

Features: ●Core 3 N355/N150 ●DDR5 SODIMM x 1 (up to 16GB) ●HDMI 1.4, VGA, LVDS ●2.5GbE x 3, SATA 6Gb/s, GPIO 8-bit ●USB 3.2 Gen 2 x 2, RS-232/422/485 x 2, RS-232 x 2 ●Mini PCIe x 1, M.2 2230 E-Key x 1, M.2 3052 B-Key x 1 ●DC input 9V～36V

Features: ● Equipped with Intel Core Ultra 5 125H/Ultra 7 155H・155U ● DDR5 5600MHz SO-DIMM x2 slots (up to 96GB) (sold separately) ● LVDS x 1, eDP x 1, DP x 1, HDMI x 1 ● LAN x 3, SATA 6Gb/s x 1, 8-bit GPIO ● USB 3.2 Gen2 x 2, USB 2.0 x 4 ● M.2 2280 M-Key x 1 (PCIe 4.0 [x4]/SATA), M.2 3052 B-Key x 1, M.2 2230 E-Key x 1 ● DC 9~36V input * Heat spreader and fan-equipped heat sink sold separately GENE-MTH6-FAN: Fan-equipped heat sink GENE-MTH6-HSP: Heat spreader * Memory, storage, and OS are sold separately.

Our company will be exhibiting at the "28th IoT & Edge Computing Expo [Spring]" within Japan IT Week, which will be held at Tokyo Big Sight from April 8 (Wednesday) to April 10 (Friday), 2026! We will showcase an AI compact edge PC equipped with NVIDIA's Jetson Thor, boards and PCs featuring Intel's Panther Lake and Bartlett Lake, a vending machine-type demo using ARM boards, as well as touch panel PCs, tablet PCs, and other peripheral devices. ■ Dates: April 8 (Wednesday) - April 10 (Friday), 2026 ■ Hours: 10:00 AM - 6:00 PM (until 5:00 PM on the final day) ■ Venue: Tokyo Big Sight, West Hall 3 ■ Booth Location: W22-22 You can register for your visit at the URL below. We sincerely look forward to your attendance. https://www.japan-it.jp/spring/ja-jp/register.html?code=1606569853287533-WSW

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If you require a detailed technical explanation, please contact us.

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)