New product for abnormal temperature alarm that detects abnormal temperatures in home appliances and industrial equipment.

New product for abnormal temperature alarms that detect and alert for abnormal temperatures in home appliances and industrial equipment.

■Features of the Abnormal Temperature Alarm 1. Can be installed on household appliances and industrial equipment in factories to provide an abnormal temperature (80°C) alarm. 2. Enables early detection of abnormal temperatures, preventing equipment damage and fires. 3. Allows for regular monitoring of abnormal temperatures, ensuring reliable and safe maintenance management. 4. Can be easily installed on household appliances, industrial equipment, and appliances that may be subject to recall. 5. The abnormal temperature alarm is an eco-friendly technology product with zero standby power due to its switching function. 6. The temperature memory sensor directly detects temperature and signals through physical operation without the need for power or measuring devices. 7. The temperature memory sensor is a product that integrates shape memory alloy into a coil shape with electrical wires. 8. The temperature memory sensor detects temperature by short-circuiting the two wires (softening) and shape memory alloy (restoration) to generate a signal. 9. This product meets the performance standards of type 1 fixed temperature detectors (120 seconds) as specified by fire safety regulations. 10. It is a non-resettable type that allows for confirmation after activation. (Once activated, it cannot be reactivated. The activated location can be deleted and reconnected.)

• Safety switch
• Safety Sensors
• Other safety equipment

Early detection of abnormal temperatures due to industrial equipment fires / New product for industrial abnormal temperature alarms

■Features of Industrial Abnormal Temperature Alarm Device 1. It can detect abnormal temperatures in industrial equipment early, preventing damage and fires. 2. It allows for daily collective monitoring of abnormal temperatures in various industrial machines. 3. By installing it on each industrial device, maintenance management of the entire factory can be conducted reliably and safely. 4. It is an eco-technology that can detect and alarm abnormal temperatures in various industrial machines with zero standby power. 5. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and send a signal. 6. It can directly sense temperature and send signals through physical operation without the need for power supply or measuring instruments. 7. It can be wired similarly to electrical equipment wiring and can be used for both indoor and outdoor wiring. 8. It is a product that integrates numerous shape memory alloys at equal intervals of 0.5m along the wire. 9. It utilizes the softening of the wire and the recovery of the shape memory alloy to short-circuit the two wires, sensing temperature and sending a signal. 10. The shape memory alloy has permanent memory, is rust-free, and can be used for many years once activated. 11. It is a product that meets the performance standards of fixed-temperature detectors Type 1 (120 seconds) as specified by fire safety regulations. 12. It is a non-resettable type that allows for confirmation after activation. (Once activated, it cannot be reactivated. The activated location can be deleted and reconnected.)

• Safety switch
• Safety Sensors
• Other safety equipment

Eco technology utilizing the restoration of shape memory alloys and the softening of electric wires / New product of temperature memory sensors

■Features of Temperature Memory Sensor 1. It operates through physical action without the need for power supply or measuring instruments, allowing direct temperature sensing and signal generation. 2. The operation allows for direct temperature detection through physical action, and the circuit configuration can be simple and low-cost. 3. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and generate a signal. 4. It can continuously monitor various abnormal temperatures. 6. This product integrates shape memory alloy with the wire. Set temperature (80°C). 7. It utilizes the softening of the wire and the recovery of the shape memory alloy to short-circuit the two wires for temperature sensing and signal generation. 8. It is an eco-friendly technology product with zero standby power due to its switching function. 9. The shape memory alloy has permanent memory, is rust-free, and retains its state permanently once activated. 10. This product meets the performance standards of fixed temperature type detectors as specified by fire safety regulations (120 seconds). 11. It is a non-resettable type that allows for confirmation after activation. ■Contact Information for Inquiries 2-2-8 Minami Tsutsujigaoka, Kameoka City, Kyoto Prefecture, 621-0847 Space Works Contact: Wada wadakame@siren.ocn.ne.jp TEL: 0771-25-3430 / FAX: 0771-25-4932

• Sensors
• Sensors
• Safety Sensors

New product of temperature sensing wire integrated with multiple temperature memory sensors.

■Features of Temperature Sensing Wire 1. Direct temperature sensing and signal generation through physical operation without the need for power supply or measuring instruments. 2. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and generate a signal. 3. Various abnormal temperatures can be monitored collectively on a daily basis, ensuring reliable and safe maintenance management. 4. Early detection of abnormal temperatures in various devices can prevent equipment damage and fires. 5. By simply extending the wiring, a wide range of abnormal temperature monitoring can be achieved. 6. Wiring similar to that of electrical equipment can be done, and it can be used for both indoor and outdoor wiring. 7. This product integrates numerous shape memory alloys at regular intervals along the extended wire. 8. Utilizing the softening of the wire and the recovery of the shape memory alloy, it senses temperature by short-circuiting the two wires and generates a signal. 9. It is a simple, easy, and accurate eco-technology product with zero standby power due to its switching function. 10. The shape memory alloy has permanent memory, is rust-free, and retains its state indefinitely once activated, allowing for long-term use. 11. This product meets the performance standards of fixed temperature type detectors (120 seconds) as specified by fire safety regulations. 12. It is a non-resettable type that allows for confirmation after activation. (Once activated, it cannot be reactivated. The activated location can be deleted and reconnected.)

• Sensors
• Sensors
• Safety Sensors

Hotron, which manufactures and sells sensors, provides bed exit sensors for hospitals, nursing, and care facilities. Hotron offers easy-to-understand video guidance on how to use the bed exit sensors wirelessly and how to set up device connections! ▼ Video Manual (YouTube) https://www.youtube.com/playlist?list=PLNVA4mTrZDqtJa6MfFRZQxwtfCSnAfxVy 【Bed Exit Sensors】 ○ Non-contact infrared sensor, simply place it - Pole-kun HB-H1 ○ Mat sensor, foldable thin mat - Mat-kun HB-UST ○ Body movement call - Ugo-kun HB-TV3 ○ Body movement call for wheelchairs - Ayumi-chan HB-WTV3 【Options】 ○ Nurse call linked wireless set - Wireless set (transmitter/receiver) HB-RS/HB-RJ ◎ For more information about the products, please contact us or download the catalog.

Japan is among the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of significant earthquakes occurring. For the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake measures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" ◎ For more details, please download the materials or contact us.

The pinhole inspection for packaging engineering is fully automated, eliminating packaging defects based on certain quality standards. The judgment results and operational status can be managed via a monitor screen. - Quantitative management of quality standards for the pinhole inspection process - Ensuring the quality of the product's shelf life - Establishing evaluation criteria for the manufacturing process, achieving quantitative quality assurance - Slim and space-saving design that can be connected to existing production lines - Quick changeover for product variety switching can be handled in a short time by exchanging chambers - Fully domestically produced, allowing for rapid maintenance and troubleshooting - Example target works: pillow packaging, packaged rice (packaged cooked rice), etc. *Please consult us regarding the use of this product for pharmaceuticals.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

We are currently running the VariCAD Start Support Campaign, where you can purchase VariCAD at a special price! During the campaign period, new licenses are available at 20% off the regular price. Additionally, during the SALE period, we are distributing discount coupons (note: there is a validity period for use) that can be used after the SALE ends. Customers who wish to experience VariCAD before making a purchase can obtain this coupon during the SALE period and use it later after their trial. The initial setup cost is priced at around 100,000 yen (including one year of maintenance support and upgrades) due to this discount campaign, and the annual maintenance support running cost from the second year onwards is around 50,000 yen (with conditions for purchase in the renewal month), making the total cost lower compared to other products. Why not take advantage of this campaign and start using 3D CAD at a great price? ◆ VariCAD Start Support Campaign Special Site https://varicad.add-soft.jp/support/?page_id=17614