Lightweight, compact LED tunnel lighting from Seiwa Electric.

LED tunnel lighting (with initial luminous flux correction function) conforms to the LED road and tunnel lighting introduction guidelines (draft) and improves the fixture luminous flux.

The tunnel lighting from Hoshi and Denki adopts long-lasting, high-efficiency white LEDs as the light source, and by incorporating an initial luminous flux correction function, it achieves low maintenance and energy-saving capabilities. ○ It can reduce power consumption and CO2 emissions. ○ Maintenance work that requires traffic regulation can be minimized. It can reduce maintenance work that involves traffic regulation, such as lamp replacement. 1. Long lifespan: 20 years, with only one replacement of the LED and control device; lifespan of 90,000 hours. The LED module has a long lifespan of 90,000 hours, providing over 10 years of maintenance-free operation with 24-hour daily lighting. By coordinating the lifespan of the LED module and control device, only one replacement of both will be needed during 20 years of operation. 2. Lineup: Two types of light distribution and four types of light source capacity. With two types of light distribution and four types of light source capacity, it accommodates a wide range of design speed conditions (40–80 km/h). ■ Ceiling-mounted wide span (CL) …… Two types: LED 50W, 80W ■ Side wall-mounted wide span (BL) …… Four types: LED 40W, 50W, 80W, 100W 3. Supports special dimming: Two-stage dimming capability.

• LED lighting

LED tunnel lighting (with initial luminous flux correction function) has been improved to comply with the LED road and tunnel lighting introduction guidelines (draft).

LED Tunnel Lighting By adopting long-life, high-efficiency white LEDs as the light source and incorporating an initial luminous flux correction function, we achieve low maintenance and energy-saving features. 1. Long Life: 20 years, with only one replacement of the LED and control device; lifespan of 90,000 hours. The LED module has a long lifespan of 90,000 hours, allowing for maintenance-free operation for over 10 years with continuous lighting of 24 hours a day. By coordinating the lifespan of the LED module and control device, only one replacement of both will be needed during 20 years of operation. 2. Lineup: Two types of light distribution and four types of light source capacities. With two types of light distribution and four types of light source capacities, it can accommodate a wide range of design speed conditions (40-80 km/h). ■ Ceiling-mounted wide span (CL) … two types: LED 50W, 80W ■ Side wall-mounted wide span (BL) … four types: LED 40W, 50W, 80W, 100W 3. Supports special dimming: A function made possible by LEDs; two-stage dimming is possible. 4. Initial luminous flux correction function (our unique feature). 5. Standard equipped with luminous flux reduction alarm function (our unique feature). 6. Modularization of component parts.

• LED lighting

When measuring the flow rate of liquids or gases that are unsuitable for plastic due to high pressure or high temperature, our robust "glass tube variable area flow meter (rotameter)" allows for more accurate flow measurements. It offers a wider flow range and is suitable for various liquids and gases! 【Features】 ■ Glass tube variable area flow meter ・ Flow measurement technology with high durability, economy, and excellent operability ・ Capable of a wider flow range, suitable for various liquids and gases ■ Metal tube variable area flow meter ・ Durability and accuracy that withstands high pressure and harsh temperature environments 【Product Lineup】 ■ Glass tube variable area flow meter ・ Sho-Rate models 1350, 1355, 1358 ・ GT1600 series ■ Metal tube variable area flow meter ・ MT3750 series ・ MT3809 series ▼ For more details, visit https://www.brooksinstrument.com/ja-jp/products/variable-area-flow-meters

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

A "non-contact switch" that allows you to open and close doors simply by waving your hand, without directly touching the doorknob or switch! By adopting microwave technology, the risk of malfunction due to condensation in environments with temperature differences, such as cold storage warehouses, is significantly reduced. It reduces the risk of virus and bacterial infections in places where hygiene is a concern, such as food factories, hospitals, nursing facilities, and restaurant kitchens. 【Features】 ○ Reduces the risk of virus infection by allowing door operation without contact ○ Waterproof and dustproof (IP55 design), allowing the main unit to be washed with water (note: the wall surface (back side) is not applicable) ○ LED display and response sound allow for easy confirmation of detection status ○ Two pattern settings for one-shot and latch output are possible ○ The thinnest in the industry! Only 22mm thick! ◎ For more details, please download the catalog or contact us.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.