【Exhibition held in Osaka!】Exhibiting at "Powder Technology Exhibition Osaka 2015" for the first time in over a decade! We will showcase stainless steel containers for powder recovery and powder feeding. --Nitto Metal Industry Co., Ltd., a stainless steel container manufacturer--

【New Product】Check the interior without opening the lid! The inside of the stainless steel container is clearly visible!

■ "We solve the problem of 'not being able to see the contents of stainless steel containers'!" ■ The transparent acrylic lid stainless steel airtight container [CTH-AF] allows you to: - Avoid opening the lid of a tank with contents, - Store items with strong odors, - Keep contents that dislike outside air, - Ensure visibility of the container... etc. It is a stainless steel tank that allows you to check and monitor the contents without opening the lid! It can be used for temporary storage of powders and liquids that are sensitive to moisture and outside air. By placing a packing between the container and the lid and sealing it with a clip, it prevents spillage of contents and contamination from dust and other foreign substances. - You can also use it this way... Depending on the process, you can switch between the acrylic lid and the stainless steel lid. (Stainless steel lid sold separately)

• Stainless steel container

Resolve storage dissatisfaction! Stackable stainless steel containers!

Are you having trouble with the storage of containers? Stacking taper-shaped airtight containers will eliminate wasted space! ○ Expand space by stacking containers in use! It is possible to stack them while sealed with the lid, significantly reducing the space occupied by the containers. ○ Further expand space by stacking unused containers! When not in use, the lids can be removed to stack them. They can be compactly organized and stored in a small space. ● Applications This is a sealed stainless steel tank used for temporary storage of powders, liquids, etc., that are sensitive to moisture and outside air. By placing a packing between the container and the lid and tightening it with a catch clip, it prevents the contents from spilling and keeps out dust and other foreign substances. Made of stainless steel, it is resistant to rust and can be reused, making it suitable for various fields such as pharmaceuticals, cosmetics, food, and chemicals. The corners of the bottom have an R structure, making it difficult for dirt to accumulate, which enhances cleanliness and hygiene.

• tank

No accumulation of contents, dirt, or cleaning solution! A discharge chute that works great when using the inverted lifter! Custom-made to suit your needs!

By setting it in our stainless steel tank (ST/CTL) and inverting the container, the contents of the powder can be discharged (or input) into equipment such as grinders. The connection parts are flat to prevent powder accumulation, ensuring that even expensive powders are not wasted. Additionally, the included PTFE gasket does not tear, preventing contamination of the contents. The chute is made of stainless steel, making it resistant to rust, and the gaps in the rolled edge are welded all around to prevent dirt and cleaning liquids from accumulating, making it very hygienic. It can also be used as a discharge chute when using an inversion lifter. Its thin and lightweight design makes it easy to handle. Specifications can be changed according to the application.

• Stainless steel container

Dedicated valve for stainless steel bulk discharge with numerous inquiries! Lightweight and compact! Ideal for tablets and more!

It is used by connecting to the discharge port of containers such as stainless steel hoppers. It is a valve that opens and closes by sliding a plate-like disc. The structure is simple, making it easy to disassemble and assemble during cleaning. When the valve is fully open, there are no obstacles to the flow, and the seat can match the same diameter as the discharge port. The main body is made of stainless steel, and the sealing material is only PTFE, making surface treatments like electropolishing easy. It has almost no airtightness for gases and liquids, and is unsuitable for flow regulation as it is intended only for powders and solids with fully open and fully closed applications. It is equipped with a locking function to prevent incorrect opening and closing of the valve. ○ Features - Easy to disassemble, clean, and assemble. During cleaning, it can be disassembled and assembled simply by attaching and removing the fixing butterfly bolt. No tools are required. - There are no powder accumulations, and it has an opening and closing port with the same diameter as the drain outlet. When fully open, there are no obstacles in the valve to impede the flow, allowing all fluids to pass through. - Surface treatment of the inner surface of the valve can be performed. Surface treatments tailored to the contents, such as electropolishing and fluororesin coating, can be applied. - The size and type of fittings can be freely set for both the inlet and discharge sides.

• valve

We will be exhibiting jointly with the JGC Group at "SEMICON JAPAN 2025" held at Tokyo Big Sight. <JGC Group Exhibition Overview> Since its founding, the JGC Group has been involved in various fields, including EPC (Engineering, Procurement, and Construction) for plants and factories representing oil refining and natural gas, as well as diverse businesses such as the manufacturing of catalysts, inorganic materials, and fine ceramics components. In the semiconductor field, we contribute to the semiconductor industry in multiple ways, focusing on "design and construction of semiconductor-related factories," "components for semiconductor manufacturing equipment," and "materials for semiconductor materials." <JFC Exhibition Overview> In the Japan Fine Ceramics corner, we will introduce products and application examples related to semiconductors. ● Application examples of "metal-ceramic composite materials" for temperature-controlled wafer chucks and cooling jackets ● Thin-walled rib structures "SiC ceramics" for lightweight, high-rigidity stages ● Ceramic substrates and thin-film metallized substrates ● High-performance "silicon nitride substrates" for power semiconductors ● Transparent alumina, low dielectric loss alumina, Li-ion conductors, cells for SOFC/SOEC, pressure sensors for hydrogen environments We look forward to welcoming you at our booth.

Nitto Kohki will exhibit at the "30th Mechanical Components Technology Exhibition [Tokyo]" held at Makuhari Messe Hall 5 from July 9 (Wednesday) to July 11 (Friday). [Booth Number: Hall 5 31-32] At this exhibition, we will showcase a variety of products, including the electric suction hand "e-VEE" with a built-in pump that does not require compressed air, a cordless belt sander, the electric driver "Delvo" that can be mounted on robots, and the "Flow Monitor" that allows for easy visualization of the flow of cooling water in molds and other applications.

Nitto Kohki will hold the "2025 Attack Fair in Meiko" for two days from July 23 (Wednesday) to July 24 (Thursday), 2025, at the "Kowa Seminar Plaza 2F Training Room NO.12 (inside Kowa Sports Land)." The Attack Fair is an exhibition where you can actually "see, touch, and operate" Nitto Kohki's products. Additionally, there will be wonderful souvenirs for attendees and many fun activities planned. We look forward to welcoming everyone!

Nitto Kohki will hold the "2025 Attack Fair in Kurume" at the "Local Production Kurume General Exhibition Hall" for two days from February 13 (Thursday) to February 14 (Friday), 2025. The Attack Fair is an exhibition where you can actually "see, touch, and operate" Nitto Kohki's products. Additionally, there will be wonderful commemorative gifts for visitors and many fun activities prepared. We look forward to welcoming everyone!

"Overcoming Resource Shortages - How Introducing Inside Sales Changed the Sales Environment" While lead acquisition through exhibitions and newsletters was progressing smoothly, Shinano Kenshi faced challenges in responding to and following up with new leads. There was a demand for a structured approach to lead nurturing within the limited sales resources, as they encountered issues such as "appointments do not lead to negotiations or deals" and "building ongoing relationships is difficult." In this seminar, we will introduce how the implementation of inside sales outsourcing helped establish a lead nurturing system, allowing the sales team to focus on "high-quality negotiations." We will also share the process of transitioning from outsourcing to establishing an in-house inside sales department that continues to generate results, using real examples. Registration is required in advance. We hope you take this opportunity to participate.