【Exhibition held in Osaka!】Exhibiting at "Powder Technology Exhibition Osaka 2015" for the first time in over a decade! We will showcase stainless steel containers for powder recovery and powder feeding. --Nitto Metal Industry Co., Ltd., a stainless steel container manufacturer--

【New Product】Check the interior without opening the lid! The inside of the stainless steel container is clearly visible!

■ "We solve the problem of 'not being able to see the contents of stainless steel containers'!" ■ The transparent acrylic lid stainless steel airtight container [CTH-AF] allows you to: - Avoid opening the lid of a tank with contents, - Store items with strong odors, - Keep contents that dislike outside air, - Ensure visibility of the container... etc. It is a stainless steel tank that allows you to check and monitor the contents without opening the lid! It can be used for temporary storage of powders and liquids that are sensitive to moisture and outside air. By placing a packing between the container and the lid and sealing it with a clip, it prevents spillage of contents and contamination from dust and other foreign substances. - You can also use it this way... Depending on the process, you can switch between the acrylic lid and the stainless steel lid. (Stainless steel lid sold separately)

• Stainless steel container

Resolve storage dissatisfaction! Stackable stainless steel containers!

Are you having trouble with the storage of containers? Stacking taper-shaped airtight containers will eliminate wasted space! ○ Expand space by stacking containers in use! It is possible to stack them while sealed with the lid, significantly reducing the space occupied by the containers. ○ Further expand space by stacking unused containers! When not in use, the lids can be removed to stack them. They can be compactly organized and stored in a small space. ● Applications This is a sealed stainless steel tank used for temporary storage of powders, liquids, etc., that are sensitive to moisture and outside air. By placing a packing between the container and the lid and tightening it with a catch clip, it prevents the contents from spilling and keeps out dust and other foreign substances. Made of stainless steel, it is resistant to rust and can be reused, making it suitable for various fields such as pharmaceuticals, cosmetics, food, and chemicals. The corners of the bottom have an R structure, making it difficult for dirt to accumulate, which enhances cleanliness and hygiene.

• tank

No accumulation of contents, dirt, or cleaning solution! A discharge chute that works great when using the inverted lifter! Custom-made to suit your needs!

By setting it in our stainless steel tank (ST/CTL) and inverting the container, the contents of the powder can be discharged (or input) into equipment such as grinders. The connection parts are flat to prevent powder accumulation, ensuring that even expensive powders are not wasted. Additionally, the included PTFE gasket does not tear, preventing contamination of the contents. The chute is made of stainless steel, making it resistant to rust, and the gaps in the rolled edge are welded all around to prevent dirt and cleaning liquids from accumulating, making it very hygienic. It can also be used as a discharge chute when using an inversion lifter. Its thin and lightweight design makes it easy to handle. Specifications can be changed according to the application.

• Stainless steel container

Dedicated valve for stainless steel bulk discharge with numerous inquiries! Lightweight and compact! Ideal for tablets and more!

It is used by connecting to the discharge port of containers such as stainless steel hoppers. It is a valve that opens and closes by sliding a plate-like disc. The structure is simple, making it easy to disassemble and assemble during cleaning. When the valve is fully open, there are no obstacles to the flow, and the seat can match the same diameter as the discharge port. The main body is made of stainless steel, and the sealing material is only PTFE, making surface treatments like electropolishing easy. It has almost no airtightness for gases and liquids, and is unsuitable for flow regulation as it is intended only for powders and solids with fully open and fully closed applications. It is equipped with a locking function to prevent incorrect opening and closing of the valve. ○ Features - Easy to disassemble, clean, and assemble. During cleaning, it can be disassembled and assembled simply by attaching and removing the fixing butterfly bolt. No tools are required. - There are no powder accumulations, and it has an opening and closing port with the same diameter as the drain outlet. When fully open, there are no obstacles in the valve to impede the flow, allowing all fluids to pass through. - Surface treatment of the inner surface of the valve can be performed. Surface treatments tailored to the contents, such as electropolishing and fluororesin coating, can be applied. - The size and type of fittings can be freely set for both the inlet and discharge sides.

• valve

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

We are currently running the VariCAD Start Support Campaign, where you can purchase VariCAD at a special price! During the campaign period, new licenses are available at 20% off the regular price. Additionally, during the SALE period, we are distributing discount coupons (note: there is a validity period for use) that can be used after the SALE ends. Customers who wish to experience VariCAD before making a purchase can obtain this coupon during the SALE period and use it later after their trial. The initial setup cost is priced at around 100,000 yen (including one year of maintenance support and upgrades) due to this discount campaign, and the annual maintenance support running cost from the second year onwards is around 50,000 yen (with conditions for purchase in the renewal month), making the total cost lower compared to other products. Why not take advantage of this campaign and start using 3D CAD at a great price? ◆ VariCAD Start Support Campaign Special Site https://varicad.add-soft.jp/support/?page_id=17614

We are currently running the VariCAD Start Support Campaign, where you can purchase VariCAD at a special price! During the campaign period, new licenses are available at 20% off the regular price. Additionally, during the SALE period, we are distributing discount coupons (note: there is a validity period for use) that can be used after the SALE ends. Customers who wish to experience VariCAD before making a purchase can obtain this coupon during the SALE period and use it later after their trial. The initial setup cost is around 100,000 yen (including one year of maintenance support and upgrades) at the discounted campaign price, and the annual maintenance support running cost from the second year onwards is around 50,000 yen (with conditions for purchase in the renewal month), making the total cost lower compared to other products. Why not take advantage of this campaign and start using 3D CAD at a great price? ◆ VariCAD Start Support Campaign Special Site https://varicad.add-soft.jp/support/?page_id=17614

Thank you very much for your continued support. We regret to inform you that our company will be closed for the following period for the Golden Week holiday. <Golden Week Holiday Period> From Saturday, April 25, 2026, to Tuesday, May 5, 2026 During this period, we will be closed for business. If you have any inquiries, please use email or the contact form on our website to reach the person in charge. We will respond to your inquiries sequentially after Tuesday, May 6. We apologize for any inconvenience this may cause and appreciate your understanding. [Limited Company Iida Manufacturing, Fukushima No. 2 Factory] 〒969-1204 21-2 Mizukami, Nukazawa, Motomiya City, Fukushima Prefecture TEL: 0243-64-2320 FAX: 0243-64-2571

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!