We will be exhibiting at the 11th Medical Creation Fukushima 2015.

We respond to your requests for plastic processing products with our "comprehensive strength."

We specialize in small-sized, high-precision resin molding and ultra-thin products with wall thicknesses of less than 1mm produced through high-speed molding, as well as molded products with multi-point gates, such as mobile phone buttons. Our technology has been refined to meet the stringent quality demands required for the compactization of mobile phones. We believe that by leveraging the know-how accumulated through our past experiences, we can satisfy our customers' expectations.

• Other electronic parts

Peace of mind! A convenient companion for your life♪ Your ideas will expand its uses!

Made of silicone rubber, it is: 1. Heat resistant 2. Fully washable 3. Non-slip

• Other food factory equipment and parts

Contributing to cost reduction for customer prototypes with 3D printer manufacturing!

The single layer thickness of the 3D printer introduced by San Arrow Kasei is 16 μm, providing sufficient resolution for confirming prototype shapes. The build size can accommodate up to 340 (X) × 340 (Y) × 200 (Z) mm. You can choose from acrylic-based rigid materials and rubber-like materials. Above all, since we can directly create from design data, we can significantly reduce the waiting time for our customers. 【Features】 ○ You can immediately bring your envisioned design to shape and verify it by seeing and touching it. ○ We can create from 1 piece. ○ Not only rigid resins but also soft materials like rubber can be produced. ○ We can effectively reduce costs in the prototyping stage. ● For more details, please download the catalog or contact us.

• 3D Printer
• others

High-performance materials with new functions while maintaining excellent fundamental properties.

Our company specializes in the press molding of silicone rubber compounds. The advantage of press molding is that it can accommodate small production runs. Additionally, due to the simple mold structure, the initial costs for mold creation can be significantly reduced. We have production equipment including roll machines ranging from 8 to 18 inches, press machines from 70 to 250 tons, and a 250-ton vacuum molding machine, allowing us to handle a wide range of needs from prototyping to mass production.

• Rubber

Precision molding of silicone rubber - Contributing to improved reliability and cost reduction for our customers through various integrated molding techniques!

San Arrow Kasei specializes in the press molding of silicone rubber compounds. One of the advantages of press molding is its ability to accommodate small production runs. Additionally, due to the simple structure of the molds, the initial costs for mold creation can be significantly reduced. As for our production equipment, we have roll machines ranging from 8 inches to 18 inches, press machines from 70 tons to 250 tons, and a 250-ton vacuum forming machine, allowing us to handle a wide range of needs from prototyping to mass production. We pay meticulous attention to quality control from the time we receive an order until delivery, always striving to enhance our customers' trust. 【Molding Methods】 ○ Precision Molding → Responding to silicone rubber molding that requires dimensional accuracy, etc. ○ Multi-color Integrated Molding → Integrating silicone rubbers of different colors and hardness without using adhesives, etc. ○ Integrated Molding of Different Materials → Integrating silicone rubber with materials such as resin and metal, etc. ● For more details, please download our catalog or contact us.

• others

Please place your custom orders for various silicone rubber experimental equipment!

As we advance our research, we find that using only generic products makes it difficult to conduct experiments smoothly. For researchers who are facing even minor concerns like "If only this could be done this way, it would work well..." or "The accuracy of homemade solutions is just not enough...", please leave it to us at San Arrow Chemical.

• Other experimental consumables
• others

Composite parts can be created by insert molding silicone and metal components.

This is a method of inserting metal parts into a mold and forming them with silicone. It is a product that utilizes the soft characteristics of silicone while ensuring the rigidity of the metal. Additionally, since it is insert molding, it does not require adhesives, which can also contribute to cost reduction.

• Other electronic parts

Our company is capable of precision molding of ultraviolet (UV) curing resin.

We perform precision molding of UV-curable resin that hardens with ultraviolet light (UV). Thin molded products, which are difficult to achieve with injection molding, can be easily handled by using UV-curable resin. Additionally, UV-curable resin molding leads to improved efficiency through reduced molding time and contributes to a lower environmental impact, making it a highly attractive technology.

• Other electronic parts

Conductive switch button utilizing silicone material.

Silicone is originally an insulating material that does not conduct electricity. However, it is possible to create conductive silicone switches through special methods. We can propose silicone switch buttons in various shapes, colors, and hardness levels.

• switch

This is a course where you can systematically learn the knowledge and skills necessary for management positions from the perspectives of leadership and labor management, and strengthen your "ability to motivate people." It is open to one participant per company. Content: - The ideal image of a leader - Team building that creates results - Ways to communicate that engage people - Methods for guiding and developing subordinates - Rules of labor management - Prevention of harassment - Mental health in the workplace Here are some comments from participants: - I have dreamed of becoming the best team, so I will share this with my members and take steps forward! - If I communicate what I am not doing to the staff, I won't gain their support. I will express it through my own actions. - The phrase "Strategies to enhance motivation without human relationships are meaningless" resonated with me. - I had no knowledge about labor issues, and it was a learning experience. I will study to be able to respond as a leader. We look forward to your participation. *Details can be downloaded from "Product Information." *For inquiries and applications, please contact us below or visit our website or call us. *Registration will close once we reach capacity.

We want to improve our operations with AI, but what exactly can we do... For those who want to actually try out and compare services, we have an announcement. The electronic contract and document management service paperlogic will be exhibiting at the 'Business Innovation Fair 2025 Autumn in Makuhari' hosted by Otsuka Shokai on November 13th (Thursday) and 14th (Friday) at the Hotel Green Tower Makuhari. Seminars on business improvement and AI utilization will also be held, so if you are nearby, please come and visit us. ● We will also be conducting product demonstrations of paperlogic at the venue. The biggest feature of paperlogic is that it is easy to use and simple, yet it complies with all document management regulations, including the Electronic Bookkeeping Act. We invite you to experience this simplicity firsthand.

At our center, we regularly hold a lecture series called the "Environmental Science Seminar" aimed at providing and promoting information related to the environment and hygiene for citizens. This year, it will take place on Saturday, November 15th. We are pleased to have Dr. Takeshi Ochiai from the Kanagawa Prefectural Institute of Industrial Technology, a local independent administrative institution, deliver a lecture titled "The Future of Living Created by Photocatalysts." Photocatalysts are materials that use natural forces such as light and water to decompose and remove dirt and harmful substances. While it may sound complicated, they are actually utilized in everyday products like wall materials, window glass, and air purifiers. In this seminar, we will clearly introduce photocatalysts, a dream material that is environmentally friendly, safe, and contributes to the future of society. Additionally, we will set up an exhibition booth where you can experience the effects of photocatalysts, so please come and try it out.

Our company will exhibit equipment at the "69th Space Science and Technology Union Conference." We sincerely look forward to your visit.

Japan Filtration Group Co., Ltd. will be exhibiting at the "10th Drink Japan" held at Makuhari Messe. On December 5th (Friday), we plan to introduce our research facility "Filter Lab," established in Boston, equipped with advanced equipment and cultivation facilities, to respond timely to various customer needs for verification and product development in the exhibitor seminar area within the exhibition venue. The director, who has been involved in filter experiments for many years, will explain microbial control through the sterilization and verification methods of Levilactobacillus brevis and Alicyclobacillus acidoterrestris, which are spoilage bacteria found in fruit juice and wine.