Mfair has ended, thank you.

It is a low-cost magnet with a high degree of shape freedom.

Rubber magnets are magnets formed by mixing permanent magnet powder (ferrite or neodymium) with synthetic rubber. They are flexible, and there are two manufacturing methods: compression molding and injection molding. They have a high degree of shape freedom and are used not only for educational materials, stationery, and decorations but also in industrial applications such as small motors, cooling fans, and motor rotors. 【Features】 - A mixture of ferrite or neodymium permanent magnet powder and synthetic rubber. - Generally available in strip or sheet form. - Isotropic rubber magnets can be magnetized in multiple poles. - Operating temperature ranges from minus 40 degrees to 100 degrees. - They have a wide range of applications, including small motors, cooling fans, motor rotors, stationery caps, advertising decorations, and refrigerator seals. We have Japanese staff available. Please feel free to contact us for more details about our products.

• electromagnet
• magnet

It is a magnet with the best temperature characteristics.

Alnico magnets are metal magnets primarily composed of aluminum, nickel, cobalt, and iron. They have excellent properties in relation to temperature and remain stable even at operating temperatures of 500°C. They are suitable for specialized industries such as chemistry and aerospace defense. There are two types of alnico magnets based on their shape: sintered alnico magnets and cast alnico magnets. The former is used for smaller craft applications, while the latter is suitable for high-precision complex designs. They can also be combined with plastics and metals for special applications. 【Features】 - Excellent temperature and corrosion resistance, stable even at operating temperatures of 500°C. - There are two types based on shape: sintered alnico magnets and cast alnico magnets. The former is used for smaller craft applications, while the latter is suitable for high-precision complex designs. - The magnetic retention is relatively low, making them susceptible to demagnetization from external shocks. However, they can be magnetized again. - They can be adapted for use in automotive parts, microphones, radar, meters, aerospace equipment, sensors, etc. We have Japanese staff available. Please feel free to contact us for more details about the products.

• electromagnet

It is a magnet with excellent temperature characteristics, strong magnetic force, and resistance to rust.

This is a rare earth magnet composed of samarium and cobalt. It has excellent temperature characteristics and stability even in high-temperature working environments. In working environments ranging from 250°C to 350°C, the maximum energy value reaches 29-32 MGOe. It also has high corrosion resistance, so surface treatments such as plating are unnecessary. 【Features】 ● It is ideal for applications requiring temperature stability and high-temperature conditions (250-350°C) due to its excellent temperature characteristics. ● It is more resistant to thermal demagnetization compared to neodymium magnets, demonstrating its superiority in high-temperature working environments. ● It is resistant to rust, so surface treatments such as plating are generally unnecessary. ● There are Sm2Co5 and Sm2Co17 systems with different composition ratios; the latter has better heat resistance and magnetic strength and can be adapted for machining. The former is relatively unsuitable for special shapes. ● It is widely used in precision instruments for special applications, aerospace and military parts, as well as medical devices like MRI machines, radar equipment, high-precision electronics, and stirrers. We have Japanese staff available. Please feel free to contact us for more details about the products.

• electromagnet
• magnet

It is the most cost-effective and easy-to-process magnet in terms of usage.

This is a magnet made by injection molding a mixture of magnetic powder and thermoplastic elastomer resins (PA6, PA12, PPS). It allows for integrated molding with components such as motor shafts and yoke materials, thereby eliminating complex processes after molding. While ferrite types are common, there are also strong neodymium and samarium-cobalt types available. There are many types of binders used as well. The maximum heat resistance temperature is 235 degrees. 【Features】 ● Bonded magnets can be molded into thin shapes or any shape, and radial magnetization or multipole magnetization is also possible. ● Integrated molding with motor shafts and yoke materials eliminates complex processes after molding. ● Due to high dimensional accuracy, finishing processes are unnecessary, and performance is stable. They are widely used in automated equipment, stepping motors, air conditioners, automatic sensors, meters, brushless motors, and high-performance home appliances and electrical equipment. We have Japanese staff available. Please feel free to contact us for more details about the products.

• electromagnet
• magnet

It is a low-cost magnet with excellent heat resistance.

Ferrite magnets (ceramic magnets) are permanent magnets made primarily by mixing iron (Fe2O3) and oxides (SrCO3) and sintering them at high temperatures. They can be mass-produced using molds at a low cost. They have excellent corrosion resistance and are suitable for use in harsh environments. Currently, they are the most widely used in the electrical industry. 【Features】 ● Custom shapes can be made at a low cost. ● They have excellent heat and corrosion resistance, are produced in large quantities, and are widely applied. ● They are brittle, so care is needed when handling them. ● Sintered ferrite magnets have relatively large tolerances due to the manufacturing process, typically +/- 2%. ● They are widely used in acoustic equipment, general electrical applications, automotive motors, general-purpose motors, and eco-industries. Examples include speakers, DC motors, air conditioner compressors, and wind power drive motors. We have Japanese staff available. Please feel free to contact us for more details about our products.

• electromagnet
• magnet

It is a magnet with high dimensional accuracy that is less likely to crack.

This is a neodymium bonded magnet made by compressing MQ powder, which is produced using the rapid cooling solidification method, with resin. It offers high freedom of shape, allowing for thin ring shapes, and has high dimensional accuracy. It is isotropic with no restrictions on the magnetization direction, making it suitable for multi-pole magnetization designs. 【Features】 ● Can be molded into any shape due to compression molding; mold costs are relatively low. ● Isotropic, allowing for multi-pole magnetization after surface coating. ● Magnetic strength is weaker than neodymium magnets but stronger than ferrite magnets. ● Used in digital devices that require compact, thin, high-performance magnets. It is widely used in IT-related and electronic components such as mobile phones, meters, sensors, and HDD motors. Recently, applications in automotive parts have been observed. We have Japanese staff available. Please feel free to contact us for more details about the products.

• electromagnet
• magnet

The most powerful magnet. It enables miniaturization and high performance of products.

This is a rare earth magnet primarily composed of neodymium, iron, and boron. 【Features】 ● The magnetic energy is the highest among existing magnets, offering wide versatility, and custom shapes such as complex sizes are possible. ● It is prone to rust, so it is generally nickel-plated on the surface. ● Utilizing the characteristics of the strongest magnets allows for miniaturization and high performance of products. * Caution is needed regarding thermal demagnetization due to temperature. We have Japanese staff available. Please feel free to contact us for more details about the products.

• electromagnet
• magnet

"ROBO TUBE" is a microtube with 1D/2D code that achieves excellent sealing and fitting properties. By integrating polypropylene and thermoplastic elastomer through one-shot molding, it realizes superior sealing and fitting. Compared to conventional microtubes, the opening and closing of the cap is very smooth, reducing the stress of cap operation. 【Features】 ■ The opening and closing of the cap is very smooth compared to conventional microtubes ■ Reduces the stress of cap operation ■ Innovative two-color molding of polypropylene and thermoplastic elastomer ■ Achieves excellent sealing and fitting properties ■ High compatibility with lab automation *For more details, please download the PDF or feel free to contact us.

We have unveiled two new products. 【Downflow Dust Collector (DFPRE Large Series)】 A packaged dust collector that combines productivity and practicality. It uses downward airflow to reduce filter load, leading to lower maintenance costs. Suitable for various industrial sectors including metal and machining, industrial applications, and waste recycling. 【Workstation Dust Collector (DBE Series)】 A dust collector integrated with a workstation, saving space. Recommended for dust control in manufacturing processes such as grinding, polishing, cutting, and finishing. It accommodates long and heavy workpieces. Applicable in various manufacturing processes including metalworking, aircraft parts manufacturing, automotive manufacturing, and industrial machinery manufacturing. For more details, please refer to the downloadable catalog or contact us. (C) Nippon Donaldson, Ltd. All rights reserved.

We would like to introduce 'Slim 4' handled by FCR & Bio Co., Ltd. This product is a jacket tube with a rack lid lock and anti-rotation function (compatible capacity 4.1ml). It is autoclavable and suitable for DMSO and vapor phase of liquid nitrogen. Additionally, it features a screw cap that does not use O-rings, packing, or gaskets. 【Features】 ■ Polypropylene ■ Autoclavable ■ DMSO compatible ■ Suitable for vapor phase of liquid nitrogen *For more details, please download the PDF or feel free to contact us.

We will hold a thick plate solution event. We will propose a highly efficient automated operation for the entire factory, including cutting with the newly unveiled fiber laser machine, automatic transportation, and bending processing. This event will allow you to experience the latest machines and processing, so we encourage you to attend. 【Event Schedule】 November 21 (Friday) and 22 (Saturday), 2025, from 13:00 to 14:00 *Please note that the capacity for November 21 (Friday) is nearing full, so we recommend attending on November 22 (Saturday). If we reach capacity, we may have to decline participation. Please apply early. 【Event Location】 Amada Global Innovation Center (200 Ishida, Isehara City, Kanagawa Prefecture) 【Event Content】 Part 1: Product Introduction Seminar Part 2: Live Demonstration

Cataracts are a common condition that significantly impacts daily life, causing many people to struggle. However, cataract surgery can restore or greatly improve patients' vision. KNF vacuum pumps are an essential component of the medical devices used for such precise surgeries. KNF offers a diverse lineup of diaphragm pumps for cataract surgery. For debris removal, the N 813 is a strong option. It achieves a maximum vacuum of 0.5 mbar (absolute), a maximum flow rate of 13 l/min, and a maximum pressure of 0.3 bar (relative). The N 813 provides stable, reliable performance with a compact design. It can be equipped with a customizable state-of-the-art BLDC motor that enables precise flow control. Its configuration and motor allow for low-speed operation, ensuring the necessary flow rate and vacuum for cataract surgery while reducing noise and vibration.