Thank you for visiting the International Powder Industry Exhibition.

Stainless hopper ideal for filling machines, custom-made to fit your equipment.

【Features】 - This is a hopper designed for material feeding. - The hopper has a sharp angle of 60 degrees, allowing for smooth feeding. - It can be easily installed if your current equipment or tank lid has a Heller pipe. 【Specifications can be modified】 - Specifications can be changed to suit your equipment. - The size of the Heller outlet can be modified. - The type of outlet can also be changed; it can be converted to a flange or nipple. Please consult us.

• Food Processing Equipment

I will clear the fog on the window with a wiper blade!

This is a sight glass with a wiper that can be attached to a helix. You can check the contents inside the stainless steel container. Even when the window is fogged up with steam or when the contents splatter and dirty the window, you can maintain a clear view. When the window fogs up, simply turn the handle half a turn! The wiper blade will sweep away the fog. If your current equipment or tank lid has helix piping, it can be installed immediately. 【It is useful in the following situations】 - When heating a liquid, the sight glass fogs up with steam and you can't see inside. - During stirring, the contents splatter and dirty the window, making it impossible to see inside.

• Stainless steel utensils and containers

Control valve for powder and granular materials! There are no sliding parts or obstacles on the passage surface, so it does not damage the contents.

This is a control valve for bulk materials, also known as an iris valve. It is used as a valve for discharging and feeding bulk materials. - The choke rope on the outside allows the sleeve (valve) to open and close smoothly like a lens shutter. - The powder contact area is covered with fabric, leaving no gaps for powder to enter. - There are no sliding parts or obstacles on the passage surface, so it does not damage the contents. - It has a hygienic connection type, making it easy to connect and disconnect. - The sleeve can be easily attached and detached with one touch, allowing for simple replacement and cleaning. - Flow rate adjustment can be done freely with a handle. - The material of the sleeve can be changed according to the contents.

• valve

No accumulation of contents, dirt, or cleaning solution! A discharge chute that works great when using the inverted lifter! Custom-made to suit your needs!

By setting it in our stainless steel tank (ST/CTL) and inverting the container, the contents of the powder can be discharged (or input) into equipment such as grinders. The connection parts are flat to prevent powder accumulation, ensuring that even expensive powders are not wasted. Additionally, the included PTFE gasket does not tear, preventing contamination of the contents. The chute is made of stainless steel, making it resistant to rust, and the gaps in the rolled edge are welded all around to prevent dirt and cleaning liquids from accumulating, making it very hygienic. It can also be used as a discharge chute when using an inversion lifter. Its thin and lightweight design makes it easy to handle. Specifications can be changed according to the application.

• Stainless steel container

The "Mechanical Stitch Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

Features: ● Equipped with Intel Core Ultra 7 255H/7 155H/5 225H/5 125H ● LPDDR5x 16GB/32GB/64GB onboard ● M.2 NVMe 256GB onboard ● USB 2.0 x 8, USB 3.2 (10Gbps) x 4 ● PCIe Gen 4 [x8] x 1, PCIe Gen 3 [x1] x 4, PCIe Gen 3 [x4] x 1 (2 lanes co-lay with SATA; BOM option) ● 2.5GbE x 2 ● COM-HPC Mini standard, size 95mm x 70mm ● Optional items ECB-980A: Development carrier board HPC-ARHm-FAN01: CPU fan HPC-ARHm-HSP01: Heat spreader (Note: heat dissipation is required in the enclosure)

Features: ● Equipped with Jetson AGX Orin 32GB/64GB ● Gigabit LAN ×1, 10Gigabit LAN ×1 ● USB 3.2 Gen 2 (Type-A) ×4 ● DB-9 connector ×1 (for DIO 8 channels) ● DB-9 connector ×2 (supports RS-232/422/485: Rx/Tx/RTS/CTS) ● Jetpack 6.0.0 pre-installed

Features: ● Equipped with Intel Atom x7835RE/x7433RE ● LPDDR5x 8GB/16GB onboard ● eMMC 32GB/64GB onboard ● LVDS x 1, DDI x 1 ● USB 2.0 x 8, USB 3.2 Gen 2 x 2 ● PCIe x1 x 4 ● COMe Type 10 standard, 84mm x 55mm size ● Operating temperature -40 to 85℃ ● Optional items ECB-920A-0001: Development carrier board NANOCOM-ADN-FAN01: CPU fan NANOCOM-ADN-HSP01: Heat spreader (※ Heat dissipation is required in the enclosure)