Notice of Participation in Techno Frontier 2017 Exhibition

Instantly identify and visualize abnormal sounds. Support system construction from the measurement and verification stage.

Our company offers "IoT / Predictive Maintenance Solutions." We develop and sell sound visualization devices that achieve "visualization of sound," instantly identifying the location of abnormal sounds, and provide consulting for building predictive maintenance systems that automatically determine abnormal trends from sensor data using the MT method. The "sound visualization device" visualizes sudden sounds in real-time with high-speed processing of up to 25fps. Many customers have utilized it after purchase. The "IoT / Predictive Maintenance System Construction Consulting" monitors data such as vibrations and employs the MT method for automatic determination during abnormal trends. For higher-level visualization, remote monitoring, and ticket issuance during abnormalities, we use Bosch PPM. We build a total system from measurement to automatic determination and visualization. 【Features】 ■ Support for those who do not know where to start, from the verification stage. ■ Verification is possible with only OK data, even without NG data. ■ Total system construction from measurement to higher-level visualization. ◎ For more details, please refer to the PDF document or feel free to contact us.

• Structural Analysis
• Acoustic Analysis
• Mechanism Analysis

A sound source visualization device, for outside, inside the car, and inside the factory. It is a portable sound source visualization device.

The traditionally stationary and large equipment has been made more compact. A small microphone array has been equipped with a small camera, making it portable along with a laptop. The size is compact while maintaining the same functionality. With the handheld/portable visualization device, for example, field tests can be conducted outdoors to measure environmental noise. For instance, it can be brought into a vehicle to test various electronic components, air conditioning, speakers, etc. Additionally, it can be taken into a factory to measure environmental noise from production equipment and for preventive maintenance of production equipment. Being portable allows for use in various situations.

• DC Motor
• Vibration Testing
• Acoustic Analysis

Achieving a minimum resolution of 1cm. This is a high-resolution version of a sound source visualization device for small devices, which has been difficult until now.

This is a sound source visualization device for small devices that has been difficult to achieve until now. We have designed and manufactured a compact microphone array to more accurately identify the location of sound generation. Despite its small size, it is equipped with a wide-angle camera, allowing for instant identification of sound origin. Furthermore, like conventional devices, it achieves high-speed processing at 25fps, enabling it to track sudden sounds, movement, and changing sounds. It is effective for small motors, automotive parts, circuit boards, mobile phones, and other devices where identifying the sound generation location has been challenging. What was previously invisible can now be seen. Identifying the source of sound is a prerequisite and the most important factor for soundproofing and noise countermeasures. By visualizing sound, we will solve our customers' challenges.

• DC Motor
• air conditioning
• Acoustic Analysis

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

On September 11, 2025, AC Tasarim, a cable blade manufacturer, and our company signed a sales agency agreement for Japan. This was also announced in the company's press release and on social media. Founded in Turkey in 2003, AC Tasarim manufactures flexible EMI cable shields (copper braid), polyester braid, meta-aramid braid (Nomex cable sleeves), flat copper braid busbars/ground braids, all AA59569-coded copper braids, and released AeroBraid in 2025, the world's lightest EMI braid. All manufactured copper braids are certified to military standards. AC Tasarim products hold key certifications including VDE/VG certification, German Federal Armed Forces certification, NATO NSN coding, AS9100 quality certification, and JOSCAR certification. Cable braids and EMI shielding products, essential for wire harnesses in the aerospace and defense industries, are becoming increasingly difficult to source as demand rises. TC Tasarim products are stocked by manufacturers and distributors to ensure quick response times.

Starting from September 22, 2025 (Monday), we will begin accepting orders for five new lineups tailored to various applications in the "N-SELECT" series of transport vehicles. In this new development, we will introduce the following five models that maintain the basic performance of the traditional N-SELECT while addressing more specialized needs: SC (Super Carrier) - Based on the traditional N-SELECT, this model is specialized for transporting immobile and accident vehicles. It is ideal for the automotive maintenance and towing industry. RC (Racing Carrier) - Designed with a gentle loading and unloading angle, this model is perfect for transporting sports cars and lowered vehicles. TP (Transporter) - A standard model optimized for the transportation of general passenger vehicles, suitable for a wide range of industries. ONE (Single Vehicle Loading Model) - A simple and efficient design dedicated to loading one vehicle. Recommended for small-scale transport and individual entrepreneurs. RS (Rescue) - A single vehicle loading model equipped with a crane, enhancing its capability to respond in accident scenes and tight spaces. With these lineups, N-SELECT evolves into a product group that meets a wider variety of on-site needs. We will continue to promote product development that reflects the voices from the field as the "preferred transport vehicle."