KCT type tank (black) now on sale!

Demo units available for loan! The unique bottom shape of the resin tank allows for a remaining amount of just 0.1%! Even when the liquid level decreases, stirring is still possible! Slurry can also be discharged. It eliminates residual liquid after stirring.

The "KCT Tank" is a polyethylene conical tank with a sloped bottom that can be easily attached and detached with the stirrer's shaft and paddle installed. It allows the paddle to be positioned lower in the tank, enabling stirring with a small amount of liquid. The conical bottom allows for 99.9% discharge, leaving almost no residual liquid. It is designed with various conditions in mind, making it suitable for multiple purposes. By making the tank color black, it helps mitigate liquid degradation and algae growth caused by sunlight. *The lid is white. 【Features】 ■ Easy attachment and detachment of the stirrer ■ Drain diameter is 50A, making it easy to discharge slurry ■ Residual liquid is only 0.1% ■ Can be used for various purposes utilizing the insert nuts on the side ■ Three upper pipe seats are provided For more details, please refer to the catalog or feel free to contact us.

• Plastic utensils and containers
• tank

Demo units available for loan! The unique bottom shape of the resin tank allows for a remaining amount of just 0.1%! Even when the liquid level decreases, stirring is still possible! Slurry can also be discharged. It eliminates residual liquid after stirring.

The "KCT Tank" is a polyethylene conical tank with a sloped bottom that can be easily attached and detached with the mixer shaft and paddle installed. It allows the paddle to be positioned lower in the tank, enabling mixing with a small amount of liquid. The conical bottom allows for 99.9% discharge, leaving almost no residual liquid. The basic design anticipates various conditions, making it suitable for multiple purposes. By making the tank color black, it helps mitigate liquid degradation and algae growth caused by sunlight. *The image shows a 100L black KCT tank. *The lid is white. 【Features】 ■ Easy attachment and detachment of the mixer ■ Drain diameter is 50A, allowing for easy discharge of slurry ■ Residual liquid is only 0.1% ■ Can be used for various purposes utilizing the insert nuts on the side ■ Three pipe sockets are provided on the top For more details, please refer to the catalog or feel free to contact us.

• Plastic utensils and containers
• tank

This is a tank created with a new idea that has never existed before.

The "KCT Tank" is a polyethylene conical tank with a sloped bottom that can be attached and detached while the agitator shaft and blades are mounted. Since installation work inside the tank is unnecessary, the position of the agitator blades can be lowered closer to the bottom, allowing for mixing with a small amount of liquid. Additionally, it comes standard with a 50A threaded joint (made of polypropylene). It can be adapted from 50A to 40A, 25A, 20A, and 15A using an eccentric reducer. 【Features】 ■ Easy attachment and detachment of the agitator ■ Easy discharge of slurry ■ Residual liquid of 0.1% ■ Usable for various purposes ■ Three upper pipe seats available *For more details, please refer to the catalog or feel free to contact us.

• tank

Demo units available for loan! The unique bottom shape of the resin tank allows for a remaining amount of just 0.1%! Even when the liquid level decreases, stirring is still possible! Slurry can also be discharged. It eliminates residual liquid after stirring.

The "KCT Tank" is a polyethylene conical tank with a bottom slope that can be easily attached and detached with the stirrer's shaft and paddle installed. It allows the paddle to be positioned lower in the tank, enabling mixing with a small amount of liquid. The bottom is conical, allowing for 99.9% discharge, leaving almost no residual liquid. It is designed with various conditions in mind, making it suitable for multiple purposes. 【Features】 ■ Easy attachment and detachment of the stirrer ■ Drain diameter of 50A for easy discharge of slurry liquids ■ Residual liquid is just 0.1% ■ Can be used for various purposes utilizing the side insert nuts ■ Three top pipe seats available For more details, please refer to the catalog or feel free to contact us.

• Plastic utensils and containers
• tank

Demo units available for loan! Unique bottom shape of the resin tank allows for a remaining amount of just 0.1%! Even when the liquid level decreases, stirring is still possible! Slurry can also be discharged. It eliminates residual liquid after stirring.

The "KCT Tank" is a polyethylene conical tank with a sloped bottom that can be easily attached and detached with the agitator's shaft and paddle installed. It allows the paddle to be positioned lower in the tank, enabling mixing with a small amount of liquid. The conical bottom allows for 99.9% discharge, leaving almost no residual liquid. It is designed with various conditions in mind, making it suitable for multiple purposes. 【Features】 ■ Easy attachment and detachment of the agitator ■ Drain diameter of 50A for easy discharge of slurry ■ Residual liquid is only 0.1% ■ Can be used for various purposes utilizing the side insert nuts ■ Three upper pipe seats are provided For more details, please refer to the catalog or feel free to contact us.

• Plastic utensils and containers
• tank

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.