【NEW!】Perfect for moving small or heavy containers! Stainless steel cart with handle.

Stainless steel cart with handles for easy transport of containers. The cart is made entirely of stainless steel, and the wheels are made of nylon urethane, which is less likely to damage the floor.

This is a dedicated cart for straight containers (ST/CTH/CTB/STB/SMA/KTT/DT). The cart for transporting containers [KMS] has been equipped with a handle. It is a hand-pushed cart ideal for moving small or heavy containers. The handle is attached by welding, so it does not wobble. The casters are made of nylon urethane wheels that are less likely to damage the floor. The casters are equipped with stoppers to prevent movement. Custom modifications, such as changing the height of the handle, are possible.

• Trolley

Stainless steel cart with handles for easy transportation of containers.

This is a dedicated cart for straight containers (ST/CTH/CTB/STB/SMA/KTT/DT, etc.). The cart for transporting containers [KM] has been equipped with a handle. It is an ideal hand cart for moving small or heavy containers. The handle is attached by welding, so it does not wobble. To prevent movement, the casters are equipped with stoppers. Custom modifications, such as changing the height of the handle, are possible.

• Trolley

A sterilizable stainless steel cart has been created!

○ Sterilization can be performed in an autoclave. ○ The wheels are made of MC nylon. ○ It is a lightweight plate-type cart with a pressed design. ○ The cart can be secured with casters that have stoppers. The 【KMS-A】 is a dedicated cart for straight containers (such as ST, CTH, CTB, STB, SMA, etc.). The 【KMS-A-TP】 is a dedicated cart for tapered containers.

• Trolley

A cart specifically designed for stainless steel containers ideal for clean room use!

This is a dedicated cart for stainless steel tanks (ST/CTH/CTL/STB/CTB) from Nitto Metal Industry Co., Ltd. The cart and casters are made of stainless steel, making them resistant to rust, and the nylon urethane wheels do not damage the floor and are less likely to leave marks, which is why they are widely used in clean rooms. Sizes 30 to 47 are lightweight dish types, while sizes 565 to 77H are angle types focused on strength. It comes with four swivel casters, two of which have brakes to secure the cart in place. Custom orders are available! We can accommodate notches, drainage hole processing, wheel changes, and more. Please feel free to contact us for more details!

• Stainless steel container

A cart specifically designed for stainless steel containers with convenient stoppers for easy movement!

This is a transport cart specifically designed for Nitto Metal Industry Co., Ltd.'s straight tanks (ST/CTH/CTL/STB/CTB). The cart is made of stainless steel, making it resistant to rust and hygienic. The sizes 30 to 47 are lightweight plate types, while sizes 565 to 77H are angle types focused on strength. It comes with four swivel casters, two of which have brakes to secure the cart in place. The caster wheels are made of SS rubber. Custom manufacturing and wheel changes are possible. Please contact us for more details!

• Trolley

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling and tripping of wired cables × Cable disconnection or damage × Worry about forgetting to turn on the switch after temporarily stopping the sensor. × Want to be notified of bed exit even from a location away from the nurse call outlet. Such concerns can be resolved simply by connecting to a wireless set linked to the nurse call system! Our nurse call linked wireless set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed, alleviating concerns about tripping and falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations away from the nurse call outlet, allowing for more flexible equipment placement.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

Hotron's vehicle detection sensors allow you to search for products that meet your needs in three categories: "Purpose of Use," "Location of Use," and "Product List." The sensors detect the passage of vehicles, alerting you with rotating lights or switching the display of parking availability. They manage vehicle presence, full parking, and exit warnings in parking lots, contributing to safe driving and smooth operational management within the parking area. They are used in various settings, from coin-operated parking to large-scale parking lots.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The RNP-45 is a surface mount power film resistor designed to be compatible with the TO-252 package, weighing only 0.33 grams, with a thermal resistance of 3.0°C/W and a rated power of 45W. The resistive element is a pulse-resistant thick film, featuring excellent high-frequency characteristics with a reactance component of 2.7pF and 14.7nH, while also having a pulse power performance of 1kW-1µs despite its small size. The operating temperature range is from -55 °C to +175 °C. Additionally, it incorporates several design features, such as the removal of the metal flange to maximize the thermal performance of the resistor, compatibility with standard reflow SAC solder joints instead of wire bond connections, making it suitable for automatic mounting, an increased resistive element area to enhance surge performance, and the adoption of a 0.8mm substrate to strengthen bending stress.