Optimal for liquid stirring and discharge! A stirring unit that combines a stirrer and a valve in a stainless steel container.

Recommended for liquid stirring and discharge! A stirring unit that combines a stirrer and a valve with a stainless steel container.

○ The container has a bottom plate that is inclined in the discharge direction, allowing for complete liquid discharge without residue. ○ It is equipped with a centrifugal stirrer that can mix low to medium-high viscosity liquids, without any blades. ○ The stirrer can be selected between air motor type and electric motor type. ○ The valve is a straight type with low flow resistance and features a diaphragm design that is excellent in chemical resistance. ○ The stirrer and valve can be easily disassembled and cleaned with a Heller connection.

• Stainless steel container

A stainless steel container comes with a magnetic stirrer and a dedicated stand. It is ideal for stirring, dissolving, preventing sedimentation, and dispersion.

- We have adopted a magnet-type immersion stirrer that does not require holes or parts in the container. - The container has a bottom plate that is inclined in the discharge direction, allowing for complete liquid discharge. - If you are already using a single taper container [KTT], you can use the stirrer without any additional modifications. - As an option, it is also possible to change the specifications of the container or select surrounding components such as valves.

• Stainless steel container

High power for reduced heating time! Stainless container with a heater that can warm up in a short time.

1. Compact Equipment The heater unit is directly attached to the container, making the equipment compact and space-efficient. Since all the devices are mounted on the container, moving it is easy. 2. No Initial Cost Chillers with both heating and cooling functions are expensive and have a higher initial cost compared to heaters. If only heating of the jacket is needed, heaters are overwhelmingly more cost-effective in terms of initial investment. 3. Can Quickly Heat the Jacket By adopting a 7.5kW heater, the water in the jacket can be heated to high temperatures in a short time, warming the contents. Product Features - The heater is installed in the jacket section, allowing for liquid heating with just this unit. - It has a dry-run prevention feature, so the heater stops when the water in the jacket is low. - Equipped with a level gauge to check the water level in the jacket. - The temperature of the mixed liquid can be adjusted through the linkage between the thermometer and the heater. - A stirrer can be attached to the container, allowing for uniform heating of the contents. As this is a made-to-order product, modifications to "dimensions" and "materials" can be made, as well as custom processing to suit specific applications.

• tank

Super compact! Portable mixing and transfer equipment! You can manage the mixer and pump together.

- A combination of stainless steel containers, mixers, and transfer pumps. - After mixing the raw materials, they can be moved directly to the next process, allowing the mixed solution to be transferred. - The operation of the mixer and pump can be collectively controlled from the control panel. - The container and cart are made of durable and rust-resistant SUS304 material. - We will select, design, and manufacture according to the usage environment and the contents.

• Other pumps

Presentation of the 'Selection Guide for 111 Points Listing'! For the mixing of food and pharmaceuticals with safety considerations!

The "Stirring and Temperature Control Unit" is a device that eliminates factors that hinder uniform stirring. We manufacture a unit tailored to your usage conditions by combining stainless steel containers and stirrers with excellent stirring efficiency, along with chillers. This allows for uniform stirring while maintaining a constant temperature of the contents. Additionally, we also design and manufacture containers that fit existing stirrers. Right now, we are offering a free selection guide for stainless steel containers! 【Features】 ■ A wide lineup that can be chosen based on application and purpose ■ Stainless steel containers with excellent stirring and discharge efficiency ■ Container attachment types do not require a stirrer frame ■ Ideal for small-batch production of various types *For more details, please refer to the catalog. Feel free to contact us as well.

• Mixer/agitator

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

This is an introduction to "outer diameter film polishing," which is used for ultra-finish machining of various shaft-type workpieces. - Wouldn't you like to achieve ultra-finish machining more easily, safely, and with less variation? Please take a look at what film polishing is, along with related products and catalogs!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed without causing any thermal impact on the base material. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

We are pleased to announce that Tokyo Machine Works Co., Ltd. will be exhibiting at the "INNOVATION EXPO 2025" to be held at Tokyo Big Sight from September 10 (Wednesday) to September 12 (Friday), 2025. 【Exhibited Equipment】 - 1-ton portable autonomous mobile robot (AMR) - 2-ton portable unmanned transport vehicle (AGV) - Shutter-equipped unmanned transport vehicle - Autonomous cleaning robot, etc. 【Booth Number】 - 6-405 You will have the opportunity to see each machine up close, including demonstrations that link the equipment together. We sincerely look forward to your visit during this event. Please note that pre-registration (free of charge) is required to attend the exhibition, so we kindly ask you to register using the link below. https://www.logistech-online.com/jp/registration.php?exhibitor=EX000072 If you would like an invitation, please request it through our contact form.