[Over 1000 measures implemented] A method to solve radio interference and reading errors of electronic tags (resolved through store renovations in apparel, specialty stores, supply chains, etc.) is explained with photos. The construction points of non-combustible aluminum SS sheets (essential under interior restrictions) are clearly visible at a glance.

We have improved the success rate of bulk reading of large quantities of products by preventing interference, misreads, and reading errors of RFID signals with a non-combustible SS sheet barrier, which also prevents the reading of non-target electronic tags.

● Before the measures were implemented, the electronic tags (RFID) on the apparel store side were being read by the reader on the back-end side, causing disruptions in operations. However, by spatially separating them with a non-combustible aluminum shield sheet partition (constructed on the back-end wall to prevent multipath interference, with ceiling installation examples depending on the environment), we reduced the impact of mutual interference and resolved the issue, and we are currently expanding renovations to all stores. ● By utilizing RFID and electronic shelf labels together, we can automate necessary parts, allowing us to allocate limited personnel to areas where human involvement enhances corporate value and the significance of the store, thus achieving true labor reduction. Recently, due to the pressure on radio waves leading to frequency shifts and reconfigurations, as well as an increase in RFID users and other wireless devices, cases of acquired radio interference and other obstacles have been observed. However, considering the characteristics of RFID, what is expected is not just labor reduction. ● The non-combustible certified aluminum electromagnetic wave shielding sheet used has obtained F☆☆☆☆ certification and fireproof certification (non-combustible: NM-1776). Its high shielding performance and durability make it user-friendly, and because it can be relatively easily installed in general interior construction, it is expanding its range of applications in various uses where specialized skills were previously required.

• aluminum

Non-combustible materials exhibit excellent strength and electromagnetic wave shielding properties, are superior in durability and workability, and facilitate easy new construction, renovation, and maintenance work.

【SS Sheet: Fireproof Material Certification Number (Non-combustible: NM-1776) F☆☆☆☆ Certification】 ● Reduction of RFID and WiFi signal interference ● Aluminum sheet reinforced with glass cloth ● Both sides are aluminum, providing unprecedented strength, making it less prone to holes or cracks from bending during installation, and excellent in workability. In case of emergencies, the joints and holes can be reinforced with conductive aluminum tape of the same material, enhancing the shielding performance. 【SS Tape】 ● Reinforcement of gaps between shielding materials, repair of holes, reinforcement of metal connections, and around openings (for shielding joints, shielding construction repairs, and joining metal to metal)

• IC tag
• aluminum
• fiber

The "Mechanical Stitch Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

Features: ● Equipped with Intel Core Ultra 7 255H/7 155H/5 225H/5 125H ● LPDDR5x 16GB/32GB/64GB onboard ● M.2 NVMe 256GB onboard ● USB 2.0 x 8, USB 3.2 (10Gbps) x 4 ● PCIe Gen 4 [x8] x 1, PCIe Gen 3 [x1] x 4, PCIe Gen 3 [x4] x 1 (2 lanes co-lay with SATA; BOM option) ● 2.5GbE x 2 ● COM-HPC Mini standard, size 95mm x 70mm ● Optional items ECB-980A: Development carrier board HPC-ARHm-FAN01: CPU fan HPC-ARHm-HSP01: Heat spreader (Note: heat dissipation is required in the enclosure)

Features: ● Equipped with Jetson AGX Orin 32GB/64GB ● Gigabit LAN ×1, 10Gigabit LAN ×1 ● USB 3.2 Gen 2 (Type-A) ×4 ● DB-9 connector ×1 (for DIO 8 channels) ● DB-9 connector ×2 (supports RS-232/422/485: Rx/Tx/RTS/CTS) ● Jetpack 6.0.0 pre-installed

Features: ● Equipped with Intel Atom x7835RE/x7433RE ● LPDDR5x 8GB/16GB onboard ● eMMC 32GB/64GB onboard ● LVDS x 1, DDI x 1 ● USB 2.0 x 8, USB 3.2 Gen 2 x 2 ● PCIe x1 x 4 ● COMe Type 10 standard, 84mm x 55mm size ● Operating temperature -40 to 85℃ ● Optional items ECB-920A-0001: Development carrier board NANOCOM-ADN-FAN01: CPU fan NANOCOM-ADN-HSP01: Heat spreader (※ Heat dissipation is required in the enclosure)