Published in the Japan Agricultural News! - Development of CO2 Control Device -

For optimal CO2 concentration management in greenhouses! The world's first CO2 controller compatible with "zero concentration difference CO2 application."

The "SA-K Series" is an agricultural CO2 controller that works in conjunction with CO2 generators to maintain the CO2 concentration in greenhouses at optimal levels. When the ventilation windows are open, it applies zero concentration difference CO2, and when the windows are closed, it applies high concentration CO2, allowing for automatic switching control (managed by a single CO2 sensor). 【What is zero concentration difference application?】 It is the application of CO2 that brings the indoor and outdoor CO2 concentration difference to zero. Even when the windows are open, during photosynthesis, the indoor CO2 concentration decreases (250-350 ppm) compared to the outdoor air (400-450 ppm), resulting in about a 20% reduction in photosynthesis compared to using outdoor air. By applying zero concentration difference, CO2 is absorbed by plants without waste, enabling photosynthesis to occur with nearly 100% efficiency. 【What is high concentration CO2 application?】 By setting the indoor CO2 concentration to a high level (700-1000 ppm), it can further promote the photosynthesis of crops. 【Recommended for those who:】 ■ Find it cumbersome to manage CO2 concentration in greenhouses ■ Want to improve production efficiency 【Benefits of introduction】 ■ Reduction of labor in operations ■ Improvement in plant production efficiency *For more details, please refer to the PDF materials or feel free to contact us.

• Other environmental analysis equipment

Recover initial costs within an average of 2 years. Achieve energy savings through the visualization of CO2 and automatic ventilation control! We also support pre-implementation effect verification.

The "CO2 Sensor Controller" measures and displays indoor CO2 concentration, temperature, and humidity, maintaining a comfortable indoor environment while enabling automatic ventilation control based on CO2 levels, which can reduce electricity costs (energy saving). It is an integrated system for measurement, display, and control, making it easy to install and maintain as an add-on. Ventilation is necessary for maintaining indoor comfort, but excessive ventilation can lead to increased air conditioning load. By implementing automatic ventilation control based on CO2 concentration, energy savings can be achieved. The CO2 Sensor Controller can be connected to various ventilation devices and supports ON/OFF, high/low, and airflow control operations. By providing information such as drawings, we can assist in creating installation plans and conducting simple calculations of energy-saving effects. 【Recommended for the following people!】 ■ Those considering easy energy-saving solutions for small to medium-sized facilities ■ Those contemplating CO2 control in new buildings ■ Those interested in "visualizing" indoor environments 【Benefits of Implementation】 ■ Improvement of indoor environment (realization of a comfortable space) ■ Reduction of electricity costs (energy saving) *For more details, please refer to the PDF materials or feel free to contact us.

• controller

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

Hotron, which manufactures and sells sensors, provides bed exit sensors for hospitals, nursing, and care facilities. Hotron offers easy-to-understand video guidance on how to use the bed exit sensors wirelessly and how to set up device connections! ▼ Video Manual (YouTube) https://www.youtube.com/playlist?list=PLNVA4mTrZDqtJa6MfFRZQxwtfCSnAfxVy 【Bed Exit Sensors】 ○ Non-contact infrared sensor, simply place it - Pole-kun HB-H1 ○ Mat sensor, foldable thin mat - Mat-kun HB-UST ○ Body movement call - Ugo-kun HB-TV3 ○ Body movement call for wheelchairs - Ayumi-chan HB-WTV3 【Options】 ○ Nurse call linked wireless set - Wireless set (transmitter/receiver) HB-RS/HB-RJ ◎ For more information about the products, please contact us or download the catalog.

In facilities operating nurse call systems, we have made bed exit sensors wireless, allowing them to notify in conjunction with the nurse call system. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensors wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ Bed exit sensors wirelessly notify in conjunction with the nurse call system. ○ Up to 5 transmitters can be registered with a single receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.