We will exhibit at the Functional Film Exhibition 2018!

A case study explaining common issues with surface treatment processing of film materials and their solutions!

The "Problem-Solving Case Study Collection" is a document that explains common issues encountered in the surface treatment processing of film materials and their solutions. Please feel free to consult us with any small concerns, such as "Can Otsuki Industries do this?" ★ We are currently offering the Problem-Solving Case Study Collection! Please take a look. 【Do you have any of these concerns? (Some examples)】 ■ Problems such as poor adhesion often occur when printing or coating plastic films... ■ I want to reduce surface friction... ■ I want to do something about static electricity issues... *For more details, please contact us or refer to the catalog.

• Processing Contract

Achieving stable adhesion with printing inks and resins! We respond according to your desired materials and adhesion strength!

The "Easy Adhesion Coating" is a surface treatment that applies a coating to various form surfaces to enhance the adhesion between the film surface and the coating resin or ink. By applying this treatment to films with low adhesion performance to coating resins or inks, stable adhesion can be achieved. We can respond to your desired materials and adhesion strength as needed. Combinations with other processed products (such as annealing) are also possible. We can accommodate small lots, so please feel free to consult with us. 【Features】 ■ Excellent adhesion to various printing inks ■ Excellent adhesion to various resins ■ Usable for UV inkjet printing ■ Compatible with screen printing and offset printing ■ Can also provide anti-static performance to easy adhesion surfaces ■ Capable of handling small lots *For more details, please feel free to contact us.

• Surface treatment contract service

By directly imparting antistatic properties to the coating mat layer, we solve the issues of sustainability and stability in products that were difficult to address with conventional methods.

Otsuki Industries has developed a "static electricity prevention performance coating mat" that directly incorporates antistatic properties into the coating mat layer. Until now, products have been processed by applying a coating mat followed by an antistatic coat on the surface of the coating mat to impart antistatic effects. The products obtained through this process have certain performance characteristics and are used in various applications, but they have faced challenges in terms of sustainability and stability. This development aims to solve such issues! ★ Scheduled to be exhibited at the Functional Coating Fair 2017 on December 5th! We look forward to your visit. 【Features】 - Excellent sustainability of antistatic performance - Excellent heat resistance - Excellent water resistance - Excellent chemical resistance *For more details, please contact us or download the PDF.

• Processing Contract

A case study explaining common issues with surface treatment processing of film materials and their solutions!

The "Problem-Solving Case Collection" is a document that explains common issues encountered in the surface treatment processing of film materials and their solutions. Please feel free to consult us about any small concerns, such as "Can Otsuki Industries do this?" ★ We are currently offering the Problem-Solving Case Collection for free! Please take a look. 【Do you have any of these concerns? (Some examples)】 ■ Problems such as adhesion failure often occur when printing or coating plastic films... ■ I want to reduce surface friction... ■ I want to do something about static electricity issues... *For more details, please contact us or refer to the catalog.

• Processing Contract

We assist with diverse needs using precise coating technology! Leave the processing of surface treatments for film materials to us.

Otsuki Industrial Co., Ltd. has applied its unique technology, cultivated through the coloring process of gold and silver threads, to the field of industrial materials, working on coating processes for web materials that can meet a wide range of demands. We always think together with our customers and engage in custom-grade manufacturing tailored to their requirements. Since this is the primary processing of web materials, there may not be anything visible as the "form" of the final product, making it difficult to imagine the nature of our work. However, utilizing the know-how we have developed so far, we will continue to respond to diversifying needs. 【Business Content】 ■ Surface coating processing based on film, primarily polyester film ■ Annealing processing, corona treatment, coating matte, release coating, easy adhesion coating, coloring coating, antistatic coating *For more details, please refer to the PDF materials or feel free to contact us.

• Processing Contract
• Other surface treatment equipment
• Surface treatment contract service

Improved wettability and adhesion of the adhesive! Corona treatment to enhance the substrate surface.

"Corona treatment" is a surface treatment technology that modifies the surface of substrates such as plastic films through corona discharge irradiation. By applying corona treatment, the surface of the substrate is modified, improving the wettability and adhesion of inks, coatings, adhesives, and other materials. Generally, plastic films have low surface tension, which often leads to issues such as poor adhesion during printing or coating. However, when corona treatment is performed, the surface tension of the substrate is significantly increased, enhancing adhesion. 【Features】 ■ Corona discharge irradiation ■ Significant improvement in surface tension of the substrate ■ Enhanced wettability and adhesion ■ Compatible with materials other than PET films ■ Capable of handling small lots *For more details, please refer to the catalog or feel free to contact us.

• Electric discharge machine
• Processing Contract
• Other surface treatment equipment

"Those who want to prevent deformation due to heat" and "Those who want to stabilize dimensions and shapes" should definitely take a look! We also explain what kind of processing it is and what applications it can be used for.

Typically, when heat is applied, the substrate shrinks significantly. However, by performing "annealing" heat treatment in advance, the amount of shrinkage is reduced, and the substrate hardly shrinks even when heat is applied. "Annealing" is a surface treatment that dramatically improves thermal dimensional stability in subsequent processes by applying heat treatment to various films. ▼ A must-see for those facing the following issues: - I want to prevent substrate shrinkage... - I want to improve dimensional stability... - I want to eliminate distortion (reduce residual stress)... Here, we explain the following: 【Table of Contents】 ■ What is annealing? ■ Examples of applications ■ Features ■ Representative physical properties *For more details, please refer to the catalog or feel free to contact us.

• Resin processing machine
• Processing Contract
• Surface treatment contract service

The "Easy Quotation Simulation" is a new web feature that allows customers to instantly display the estimated cost of metal additive manufacturing by simply registering a basic ID and providing 3D data. Traditionally, calculating the estimate required various discussions between the customer and our staff regarding data layout and equipment selection, which sometimes resulted in longer wait times for the estimate. However, with the addition of this automated quotation feature, we can now provide an approximate price level that can be shown for free, as many times as needed, in as little as 3 minutes, tailored to the customer's convenience. This service is primarily aimed at customers who are considering incorporating metal additive manufacturing depending on the price. Please note that this is only a rough price level check, and the estimated amount may vary significantly based on the shape and other factors. Therefore, if the price level feels acceptable and you wish to continue considering it, we kindly ask you to contact us for a formal quotation as usual. For inquiries, please visit our website URL: https://www.jampt.jp/simulation/

The "Mechanical Stitch Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.