Is predictive maintenance necessary for fans!? What can be done to protect important equipment? [Oriental Motor WEB Shop]

Equipped with a brushless motor! Low power consumption propeller fan compatible with wide voltage.

The "EMU Series" is a low power consumption propeller fan equipped with a brushless motor and designed for AC power input. It can be used with a wide voltage range of single-phase 100-240V (50/60Hz), providing the same characteristics regardless of the frequency used. Additionally, the fan is equipped with a rotation decrease alarm that outputs an alert when the fan motor's rotation speed decreases due to lifespan or foreign object intrusion. This allows for detection of rotation decrease, enabling replacement before the fan motor stops. 【Features】 (for the □120mm square fan) ■ Approximately 68% reduction in power consumption ■ Expected lifespan of 60,000 hours (about 6 years) ■ Compatible with single-phase 100-240V (50/60Hz) ■ Approximately 45% lighter ■ No grounding required *For more details, please refer to the PDF materials or feel free to contact us.

• Fan motor
• AC Motor

Equipped with a high-efficiency brushless motor! AC power input, low power consumption, variable speed propeller fan.

The "EMR Series" is a propeller fan equipped with a high-efficiency brushless motor and a newly developed driver, achieving low power consumption and variable speed. By adjusting the required airflow, power consumption and noise can be reduced. It is lightweight and comes with a finger guard, making installation on equipment easy. Additionally, if there is a drop in rotation or any abnormalities occur with the fan, an alarm will be output. The LED lights green during normal operation and blinks red during abnormal conditions, allowing you to check the fan's status via the LED. 【Features】 - Up to 42% reduction in power consumption (comparison between conventional products at 60Hz and the EMR series at rated rotation speed) - Energy-saving and low noise through airflow adjustment - Approximately 40% reduction in weight due to the adoption of a compact and high-power brushless motor - Pre-assembled finger guard for easy installation - Alarm function included, with fan status check via LED - Simple wiring *For more details, please refer to the PDF document or feel free to contact us.

• Fan motor

Ideal for cooling control panels! Easy selection, arrangement, installation, and maintenance due to its integrated design.

The "Control Panel Fan Unit" is a product that integrates a fan and peripheral devices (cover, filter media, frame, finger guard). Since the fan and peripheral devices are in a unified structure, selection, installation, and maintenance are easy. It keeps the internal environment of the control panel in optimal condition. 【Features】 ■ Integrated structure of fan and peripheral devices ■ Contributes to dust and drip protection inside the panel ■ A wide range of products with alarms available ■ Further energy-saving and noise-reducing for the equipment *For more details, please refer to the PDF document or feel free to contact us.

• Fan motor
• Fan Filter Unit

Automatic control of fan operation and stop! Contributes to performance improvements such as energy saving and low noise.

The "AM2-XA1" is a temperature switch for fans that can automatically control the operation and stop of the fan in response to temperature changes within the device. By controlling the fan ON/OFF based on the set temperature, it enables the reduction of fan power consumption. 【Features】 ■ Compact design ■ Optimal airflow circulation design ■ Easy to set with a finger-turn dial, no tools required ■ DIN rail compatible ■ Temperature setting range of 0 to 60°C (setting error: ±5°C) with 1°C increments ■ Certified to safety standards *For more details, please refer to the PDF document or feel free to contact us.

• Fan motor
• switch

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.