We will participate and exhibit at the "Kata Technology Workshop 2018 in Fukui."

Introducing shim plates for press processing! Renowned for their tolerance accuracy!

The shim plate "THG" is made from stainless steel material SUS301 and has achieved a hardness of HRC 47-54 through a special heat treatment, making it suitable for press processing. This product, measuring 300mm in width and 1000mm in length, features thickness markings at 20 locations, eliminating the problem of not knowing which thickness shim plate you have after cutting. Additionally, it offers superior durability compared to standard shim steel plates. 【Features】 ■ Achieves a maximum tolerance of ±0.001mm ■ Excellent durability ■ Wide range of lineup ■ Special processing available from a single shim *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• stainless

Outstanding water displacement power! A rust prevention agent that repels surface water droplets and forms a rust-resistant coating.

Are you struggling with rust removal? Prevent rust before it starts! Use Sabinikuin for rust prevention! No hassle of pre-wiping, "increased work efficiency!" ★ Outstanding water drainage performance! 【Exceptional water displacement power!】 Even when wet, it repels surface water droplets and forms a rust-proof film! ★ Low viscosity, ultra-thin soft film (approximately 1 to 2 microns) It dries moderately without stickiness in about 15 minutes after application, allowing for economical rust prevention over a wide area with a small amount. Additionally, it won't interfere with subsequent installation processes. ★ Rust prevention period: approximately 1 to 2 years Although it forms a thin film, using it for the long-term rust prevention of metal parts and machine tools can reduce defects caused by rust.

• Press Dies
• Rust Inhibitor

Persistent rust! It can be wiped off quickly without taking much time!

★Three Key Points to Choose★ <1> Rust can be removed in 5 to 10 minutes! Powerful degreasing and rust removal capability <2> Rust remover that does not require rinsing! <3> Corrosion inhibition effect: It suppresses erosion by acids and the recurrence of rust. *Note: There is no long-term rust prevention effect. ■Applications ● Removal of rust from metal parts generated during the manufacturing process ● Removal of rust from metals that occurred during the storage of materials and parts ● Removal of rust from factory machinery, tools, jigs, electrical equipment molds, etc. during use ● Removal of rust from construction hardware, office equipment, automobiles, etc. Note: It may affect materials with weak corrosion resistance (such as non-ferrous metals and sintered materials). In this case, please rinse with water or wipe with a dry cloth. ★Samples and SDS data are also available, so please feel free to contact us.

• Press Dies
• Rust Inhibitor
• Other consumables

For organizing and maintaining the appearance of molds. Also effective against rain, wind, dust, and rust! We protect your "molds."

To store molds that are not used for a while for the production of supply parts, there are times when we need to keep them, right? However... There’s no space for that, so they end up exposed outdoors... It’s hard to find them, and they get rusty... We cover them with blue tarps, but they quickly become tattered... Since they are large, it’s a struggle just to cover them... Do you have such troubles? The mold storage cover "Dai-Guard" will solve your problems! ▼ Excellent durability! The top is made of a material with excellent abrasion resistance, and the sides use thick UV-resistant sheets! Designed for outdoor storage, it is strong against sunlight and wind and rain! ▼ Convenient for management! It has a transparent pocket on the side! You can put a management sheet inside, making it easy to see the contents at a glance! ▼ Easy to put on♪ One side can be opened and closed with Velcro, so it can be put on by one person! ■ Specifications / Material - Color: Only Green x Gray (1 color) - Size: 4 types (S, M, L, XL) Custom sizes available. - Top green part: Polyester canvas - Silver part: UV #4000 - One side of the short side opens and closes with Velcro - Drawstring (with cord tightening mechanism) around the bottom perimeter

• Press Dies
• Other packaging materials

[To the owners of parking lots and parking lot construction companies] "I'm worried about the possibility of colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those facing sidewalks or roadways are particularly prone to dangerous incidents such as collisions with pedestrians or between vehicles. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures at various sites and alerts the surroundings with LED lights and buzzers. The system consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *When using the exit warning system, we kindly ask customers to arrange for the switching power supply (24V), LED rotating light, control panel, circuit breaker, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. [Contents Included] ○ Vehicle Exit Warning System Configuration ○ Comparison Table of Exit Warning Sensors ○ Four Modes ○ Wide Range of Applications ○ Customer Feedback ○ Appearance Diagram / Specifications ◎ For more details, please contact us or download the catalog.

In recent times, there has been a growing interest in infection control measures and facility hygiene management. Our company offers non-contact sensor products that are recommended for commercial facilities, food factories, and nursing and caregiving facilities. 【Sensors for Automatic Doors】 ● Light Touch Sensor HA-T401 … When you wave your hand in front of the automatic door, the sensor detects the movement and opens or closes the door. It is recommended for making doors that use touch switches non-contact. ● Hand Wave Sensor PF-R5, PF-U2, DHS-1 … Opens and closes the automatic door by waving your hand in front of the sensor. ● Foot Switch PF-01S/01D/03S/05 … Opens and closes the automatic door by placing your foot in the opening. 【Access Control System】 ● Face Recognition + Unmanned Temperature Measurement DS Series … Capable of detecting mask-wearing and measuring body temperature simultaneously with face recognition. ● Automatic Disinfectant Spray Dispenser PHW-03B … Automatically sprays disinfectant when you wave your hand in front of the sensor. 【Nursing and Care Sensors】 ● Infrared Bed Exit Sensor "Just Place It Pole-kun" … This bed exit sensor is installed next to the bed and alerts via nurse call when the subject enters the detection range. ◎ For more details, please download the catalog or contact us.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If you require a detailed technical explanation, please contact us.

Finally, the long-awaited JBC brand soldering equipment direct sales online store has been launched. Free shipping nationwide in Japan, and all products of the JBC brand are available for purchase. More than 10 types of soldering tips, with quantity discounts for over 50. From the latest model compact stations to consumables, please be sure to visit our website.