Handling CAE Solutions

"VizSpark," which makes it possible to analyze the erosion of spark plugs, which was previously difficult.

VizSpark is an arc plasma simulation software developed by Esgee Technologies in the United States, founded by Professor Raja, an expert in plasma simulation at the University of Texas at Austin. It has the most extensive track record in the analysis of spark plugs and circuit breakers, with many case studies presented at academic conferences. In Japan, it has a significant track record primarily among complete vehicle manufacturers and internal combustion engine-related manufacturers, and it supports the analysis of devices such as: - Ignition plugs (spark plugs) - Circuit breakers - Atmospheric pressure discharges - Plasma torches (plasma jets) - Welding - Thermal spraying - High-intensity lamps

• simulator
• Contract Analysis
• Analysis Services

"VizSpark" makes it possible to analyze the wear of spark plugs, which was previously difficult.

VizSpark is an arc plasma simulation software developed by Esgee Technologies in the United States, founded by Professor Raja from the University of Texas at Austin, an expert in plasma simulation. It has the most achievements in the analysis of spark plugs and circuit breakers, with many case studies presented at academic conferences. In Japan, it has a strong track record primarily among complete vehicle manufacturers and internal combustion engine-related manufacturers, and it supports the analysis of devices such as: - Ignition plugs (spark plugs) - Circuit breakers - Atmospheric pressure discharge - Plasma torches (plasma jets) - Welding - Thermal spraying - High-intensity lamps

• simulator
• Contract Analysis
• Analysis Services

"Particle-PLUS" is a plasma and rarefied fluid analysis software that specializes in magnetron sputtering devices using the particle method.

"Particle-PLUS" is a simulation software suitable for the research, development, and manufacturing of devices and materials using plasma. - It specializes in low-pressure plasma analysis. - It can perform advanced physical model analysis such as CCP and external circuit models. - It excels in plasma simulation for low-pressure gases, where calculations using fluid models are challenging. - It supports both 2D and 3D, allowing for efficient analysis even with complex models. - As a strength of our in-house developed software, it can perform CCP and magnetron sputtering calculations with standard features, and customization to fit customer devices is also possible. ◆ Supports various cases ◆ - Magnetron sputtering - PVD, plasma CVD - Capacitively coupled plasma (CCP) - Dielectric barrier discharge (DBD) - Electrophoresis, etc. ◆ Outputs various calculation results ◆ - Potential distribution - Density distribution/temperature distribution/generation distribution of electrons and ions - Particle flux and energy flux to the wall - Energy spectrum of electrons and ions at the wall - Density distribution/temperature distribution/velocity distribution of neutral gas, etc. *For more details, please feel free to contact us.

• Other analyses

"Particle-PLUS" is a plasma and rarefied fluid analysis software that uses the particle method.

"Particle-PLUS" is a simulation software suitable for research, development, and manufacturing of devices and materials using plasma. - It specializes in low-pressure plasma analysis. - It can perform advanced physical model analysis such as CCP and external circuit models. - It excels in plasma simulation for low-pressure gases, where calculations with fluid models are challenging. - It supports 2D (two-dimensional) and 3D (three-dimensional) analyses, allowing efficient analysis of complex models. - As a strength of our in-house developed software, it can perform CCP and magnetron sputtering calculations with standard features, and customization to fit customer devices is also possible. ◆ Supports various cases ◆ - Magnetron sputtering - PVD, plasma CVD - Capacitively coupled plasma (CCP) - Dielectric barrier discharge (DBD) - Electrophoresis, etc. ◆ Outputs various calculation results ◆ - Potential distribution - Density distribution/temperature distribution/generation distribution of electrons and ions - Particle flux and energy flux to the walls - Energy spectrum of electrons and ions at the walls - Density distribution/temperature distribution/velocity distribution of neutral gas, etc. *For more details, please feel free to contact us.

• Other analyses

"Particle-PLUS" is a plasma analysis software suitable for simulations such as plasma reaction furnaces and chemical vapor deposition (CVD).

Particle-PLUS is a plasma and rarefied fluid analysis software that uses the particle method. It is effective for research, development, and manufacturing of devices and materials using plasma. It is also capable of analyzing advanced physical models such as dual-frequency CCP and external circuit models. With comprehensive support, even those new to simulation or busy with experiments can reliably achieve results. The software employs a particle model to analyze plasma, using the PIC/MC (Particle In Cell / Monte Carlo) method to track the motion of particles representing electrons and ions. Additionally, depending on the target plasma density, it efficiently switches between implicit methods for relatively high densities and explicit methods for low densities, allowing for effective solutions even with complex models. It excels in plasma simulations of low-pressure gases, where fluid modeling is particularly challenging. In addition to standard functions for CCP, ICP, and magnetron sputtering calculations, customization to fit the customer's equipment is also available.

• Other analyses

This is simulation software that makes it possible to analyze the arc plasma of automotive spark plugs, which was previously difficult.

VizSpark is an arc plasma simulation software developed by Esgee Technologies in the United States, founded by Professor Raja from the University of Texas at Austin, an expert in plasma simulation. It has the most extensive track record in the analysis of spark plugs and circuit breakers, with many case studies presented at academic conferences. In Japan, it has a strong track record primarily among complete vehicle manufacturers and internal combustion engine-related manufacturers, and it supports the analysis of devices such as: - Circuit breakers - Atmospheric pressure discharge - Ignition plugs (spark plugs) - Plasma torches (plasma jets) - Welding - Thermal spraying - High-intensity lamps

• Engine parts
• Other analyses
• Contract Analysis

This is simulation software that makes it possible to analyze arc plasma in automotive spark plugs, which was previously difficult.

VizSpark is an arc plasma simulation software developed by Esgee Technologies in the United States, founded by Professor Raja from the University of Texas at Austin, an expert in plasma simulation. It has the most achievements in the analysis of ignition plugs and circuit breakers, with many cases presented at academic conferences. In Japan, it has a strong track record primarily among complete vehicle manufacturers and internal combustion engine-related manufacturers, and it supports the analysis of devices such as: - Circuit breakers - Atmospheric pressure discharge - Ignition plugs (spark plugs) - Plasma torches (plasma jets) - Welding - Thermal spraying - High-intensity lamps

• simulator
• Contract Analysis
• Analysis Services

The world's only software dedicated to analyzing arc discharge! Strong in analyzing spark plugs and circuit breakers!!

VizSpark is an arc plasma simulation software developed by Esgee Technologies in the United States, founded by Professor Raja from the University of Texas at Austin, an expert in plasma simulation. It has the most achievements in the analysis of ignition plugs and circuit breakers, with many case studies presented at academic conferences. In Japan, it has a significant track record, especially among major automobile manufacturers, and supports the analysis of devices such as: - Circuit breakers - Atmospheric pressure discharge - Ignition plugs (spark plugs) - Plasma torches (plasma jets) - Welding - Thermal spraying - High-intensity lamps

• simulator
• Contract Analysis
• Analysis Services

"Particle-PLUS" is a plasma and rarefied fluid analysis software that excels in 2-frequency CCP analysis using the particle method.

"Particle-PLUS" is a simulation software suitable for research and development of devices using plasma, compatible with CCP. - Excels in simulations of low-pressure gases where fluid modeling is challenging. - Advanced physical model analysis including CCP and external circuit models. - Supports 2D and 3D, efficiently analyzing even complex models. - As a strength of our in-house developed software, it not only includes standard functions for CCP and magnetron sputtering calculations but also allows customization to fit customer devices. ◆ Supports various cases ◆ - Magnetron sputtering - PVD, plasma CVD - Capacitively coupled plasma (CCP) - Dielectric barrier discharge (DBD), etc. ◆ Outputs various calculation results ◆ - Potential distribution - Density distribution/temperature distribution/generation distribution of electrons and ions - Particle flux and energy flux to the wall - Energy spectrum of electrons and ions at the wall - Density distribution/temperature distribution/velocity distribution of neutral gas, etc. *For more details, please feel free to contact us at information@wavefront.co.jp.

• Other analyses

"Particle-PLUS" is a plasma and rarefied fluid analysis software that excels in 2-frequency CCP analysis using the particle method.

"Particle-PLUS" is a simulation software suitable for research and development of devices using plasma, compatible with CCP. - Excels in plasma simulation for low-pressure gases where fluid modeling is challenging - Advanced physical model analysis including CCP and external circuit models - Supports 2D (two-dimensional) and 3D (three-dimensional) analysis, efficiently handling complex models - As a strength of our in-house developed software, it offers standard functions for CCP and magnetron sputtering calculations, as well as customization to fit customer devices ◆ Supports various cases ◆ - Magnetron sputtering - PVD, plasma CVD - Capacitively coupled plasma (CCP) - Dielectric barrier discharge (DBD), etc. ◆ Outputs various calculation results ◆ - Potential distribution - Density distribution/temperature distribution/generation distribution of electrons and ions - Particle flux and energy flux to the wall - Energy spectrum of electrons and ions at the wall - Density distribution/temperature distribution/velocity distribution of neutral gas, etc. *For more details, please feel free to contact us at information@wavefront.co.jp.

• Other analyses

Dilute fluid analysis software 'DSMC-Neutrals' that also supports 'shower head type CVD' analysis.

Simulation Analysis of Gas Flow in Showerhead-Type CVD Equipment Initially compatible with various simulations 【Features】 ■ By adopting a non-structured mesh, it is possible to compute the exact shape of complex actual equipment. ■ High parallel efficiency allows for quick computation results even for large-scale shapes. ■ Since a particle method is used, unlike fluid models, convergence solutions can be obtained even with poor quality computational grids. ■ With comprehensive technical support, even those new to simulations or busy with experiments can reliably achieve results. ◆ Compatible with various cases ◆ - Simulation of rarefied gas flow in a vacuum chamber - Simulation of thin film generation in semiconductor manufacturing - Simulation of thin film generation in semiconductor manufacturing such as Chemical Vapor Deposition (CVD), Organic Light Emitting Diodes (OLED), and Molecular Beam Epitaxy (MBE) ◆ Outputs various computation results ◆ - Calculation of chemical reactions - Calculation of chemical reactions from Arrhenius-type reaction data - Calculation of dissociation, recombination, and molecular (atomic) exchange reactions - Multiple reaction equations can be set up on the GUI *We also offer contract analysis, so please feel free to contact us.

• Other analyses

Analysis of gas flow under low pressure conditions; analysis software compatible with rarefied gases (rarefied fluids).

【Features】 ■ Adopts unstructured mesh, allowing for calculations that accurately reflect the complex shapes of actual devices. ■ High parallel efficiency enables quick computation results even for large-scale geometries. ■ Utilizes a particle method, ensuring convergence to a solution even with poor quality computational grids, unlike fluid models. ■ Comprehensive technical support ensures that even those new to simulation or busy with experiments can reliably achieve results. ◆ Supports various cases ◆ - Simulation of rarefied gas flow within a vacuum chamber. - Simulation of thin film generation in semiconductor manufacturing. - Simulation of thin film generation in semiconductor manufacturing processes such as Chemical Vapor Deposition (CVD), Organic Light Emitting Diodes (OLED), and Molecular Beam Epitaxy (MBE). ◆ Outputs various computation results ◆ - Calculation of chemical reactions. - Calculation of chemical reactions from Arrhenius-type reaction data. - Calculation of dissociation, recombination, and molecular (atomic) exchange reactions. - Ability to set multiple reaction equations on the GUI. * For more details, please refer to the catalog or feel free to contact us.

• Wafer
• Vacuum Equipment
• Vacuum pump

"Dust behavior affecting contamination" analysis supported by the rarefied fluid analysis software 'DSMC-Neutrals'

Simulation Analysis of Dust Behavior Affecting Contamination Initially compatible with various simulations 【Features】 ■ By adopting unstructured meshes, it is possible to compute the exact shape of complex actual devices. ■ High parallel efficiency allows for quick computation results even for large-scale shapes. ■ Since a particle method is used, unlike fluid models, convergence solutions can be obtained even with poor quality computational grids. ■ With comprehensive technical support, even those new to simulations or busy with experiments can reliably achieve results. ◆ Compatible with various cases ◆ - Simulation of rarefied gas flow in a vacuum chamber - Simulation of thin film generation in semiconductor manufacturing - Simulation of thin film generation in semiconductor manufacturing such as Chemical Vapor Deposition (CVD), Organic Light Emitting Diodes (OLED), and Molecular Beam Epitaxy (MBE) ◆ Outputs various computational results ◆ - Calculation of chemical reactions - Calculation of chemical reactions from Arrhenius-type reaction data - Calculation of dissociation, recombination, and molecular (atomic) exchange reactions - Multiple reaction equations can be set up on the GUI *We also conduct contract analysis, so please feel free to contact us.

• Other analyses

Analysis of gas flow under low pressure conditions; analysis software compatible with rarefied gases (rarefied fluids).

**Features** - Adopts unstructured mesh, allowing for calculations that accurately reflect the complex shapes of actual devices. - High parallel efficiency enables quick computation results even for large-scale geometries. - Utilizes a particle method, ensuring convergence solutions even with poor-quality computational grids, unlike fluid models. - Comprehensive technical support ensures that even those new to simulations or busy with experiments can reliably achieve results. **Supports Various Cases** - Simulation of rarefied gas flow within a vacuum chamber. - Simulation of thin film generation in semiconductor manufacturing. - Chemical vapor deposition (CVD), organic light-emitting diode (OLED), molecular beam epitaxy (MBE). - Film deposition simulations involving chemical reactions, such as CVD. **Outputs Various Calculation Results** - Calculations of chemical reactions. - Calculation of chemical reactions from Arrhenius-type reaction data. - Calculations of dissociation, recombination, and molecular (atomic) exchange reactions. - Ability to set multiple reaction equations on the GUI. *For more details, please refer to the catalog or feel free to contact us.*

• Contract Analysis
• Other analyses

Simulate the flow characteristics of positive displacement pumps such as gear pumps and vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the micrometer range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automobiles and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoid pumps for engine lubrication. *There is a lot of information that cannot be posted online. Particularly, we encourage you to see the actual mesh creation and movement through a demo presentation!!

• Thermo-fluid analysis

Simulate the flow characteristics of positive displacement pumps such as gear pumps and vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variations of flow fields (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automotive and construction machinery applications, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. In particular, please see a demo presentation for actual mesh creation and movement!

• simulator
• Thermo-fluid analysis
• Contract Analysis

Simulate the flow characteristics of volumetric pumps such as vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automotive and construction machinery, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, please see the actual mesh creation and movement in a demo presentation!!

• Thermo-fluid analysis

Simulating the flow characteristics of positive displacement pumps such as gear pumps and vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variations of flow fields (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in applications for oil pumps used in automobiles and construction machinery, with examples including vane pumps for power steering and CVTs, as well as trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. In particular, we encourage you to see the actual mesh creation and movement through a demonstration!

• Thermo-fluid analysis

Fluid analysis software for positive displacement pumps such as gear pumps and vane pumps! CFD software specialized for pumps that other CFD software struggles with!

Simerics MP+ is a fluid analysis software designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid analysis software Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variations of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automobiles and construction machinery, with examples such as vane pumps for power steering and CVT, as well as trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, the actual mesh creation and movement should be demonstrated in a live demo!!

• Thermo-fluid analysis

Simulate the flow characteristics of positive displacement pumps such as gear pumps and vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automobiles and construction machinery, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Particularly, we encourage you to see the actual mesh creation and movement through a demo presentation!

• simulator
• Thermo-fluid analysis
• Contract Analysis

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

***Contract Processing Now Accepting Orders*** We can accommodate small lots and a variety of sample tests, including spray drying with organic solvents. Please feel free to contact us. ----Example of a Prototype Schedule---- 9:30 Pre-test Meeting 10:00 Spray Drying Test Starts 12:00 Lunch Break 13:00 Spray Drying Test Resumes 16:00 Post-test Meeting

【Period: Ongoing until May 31, 2026】 Now 20% OFF! For orders of 10 or more: Dry T-shirts @ 1,600 yen (tax included) Dry polo shirts @ 2,000 yen (tax included) (Price includes the garment and one print location) * For sizes 3L and above, an additional 550 yen * An additional 550 yen for each additional print location Design and data production fees are required separately. (No fee for complete data submission) We accept orders for various purposes such as events, teams, goods, souvenirs, and gifts, from one piece to mass production. We also have many other garments not listed. Please feel free to inquire.

We have announced the "piCOBOT Electric (Standard I/O)," an electric vacuum gripper compatible with most collaborative robot brands. It enables clean and energy-efficient automation without the need for compressed air, simplifying equipment configuration while improving energy efficiency. It supports various collaborative robot brands, allowing for flexible automation. With a universal Standard I/O interface, smooth integration with major collaborative robots is possible. Additionally, its lightweight and compact design maximizes the robot's portability. By combining it with various suction cups and accessories from Piab, you can build a flexible handling system that accommodates diverse workpieces. Read the article here: https://www.piab.com/ja-jp/news/piab-launches-picobot-electric--all-electric-vacuum-gripping-for-any-cobot-brand

This column is a special series consisting of 12 installments themed around user manuals. In the first installment, we will focus on the often-overlooked "risks of postponing the user manual" in relation to CE marking compliance. In the process of obtaining CE marking, attention is often concentrated on design and safety measures, leading to cases where the preparation of the user manual is delayed. However, in practice, deficiencies in the user manual can lead to the following issues: - Rejection just before the review - Increased costs due to design revisions - Schedule delays - Product liability (PL liability) risks after shipment Even if CE marking is obtained, it is important to be aware that insufficient information provision can leave risks associated with the product.