[Custom Case] We have published a delivery case for a semiconductor component manufacturer.

BA material, 2B material, buff polishing, electrolytic polishing... A grand reveal of stainless steel surfaces that cannot be discerned by the naked eye!

Smooth, rough, silky... Depending on the material and surface finish, stainless steel shows various appearances. However, it is not possible to see what the actual surface looks like just by visual inspection. Therefore, this time, we will introduce photographs of stainless steel surfaces taken using a scanning electron microscope (SEM). *What is a scanning electron microscope (SEM)?* Unlike optical microscopes (such as magnifying glasses and general microscopes) that use light, a scanning electron microscope uses electron beams. It allows us to clearly see fine surface structures that cannot be observed with optical microscopes.

• Stainless steel container

Stainless steel is a metal that is "difficult" to rust!

We sometimes receive inquiries from customers saying, "Even though it's made of stainless steel, it rusted quickly." Stainless steel, as the English words "Stain (rust, corrosion) + less (less) + steel (steel)" suggest, is an alloy of iron that is highly resistant to rust. While it is much less prone to rust compared to regular iron, it is not completely rust-proof. This PDF document summarizes "Why is stainless steel resistant to rust?", "What causes rust on rust-resistant stainless steel?", and "What are the rust prevention measures for stainless steel containers?" You can view it immediately by downloading the PDF.

• Stainless steel container

I have summarized the important cleaning methods to make stainless steel containers last longer.

After using a stainless steel container, it is essential to clean the container. However, incorrect cleaning methods can cause scratches or lead to rust. Here, we will introduce important cleaning methods to help prolong the life of stainless steel containers.

• Stainless steel container

A round basket made of all stainless steel, equipped with handles, suitable for cleaning and sterilizing parts and instruments.

- It is used when washing parts and equipment, or when placing them into cleaning or sterilization machines. - A fine mesh with high strength is used that does not collapse under the weight of the parts or the vibrations during ultrasonic cleaning. - Made of all stainless steel SUS304, it is electropolished for hygiene. - It can also be used as an inner basket for containers. - Custom design and manufacturing are also available.

• Stainless steel utensils and containers

A fully stainless steel basket with claws, suitable for receiving foreign objects during raw material input.

- It serves as an inner basket when placing materials into the container, preventing the intrusion of foreign objects such as bag fragments. - A strong fine mesh is used that maintains its structure even when loaded with materials. - Made of all stainless steel SUS304, it has undergone electropolishing for hygiene. - It can also be placed into cleaning and sterilization machines. - Custom design and manufacturing are also available.

• Stainless steel utensils and containers

The pinhole inspection for packaging engineering is fully automated, eliminating packaging defects based on certain quality standards. The judgment results and operational status can be managed via a monitor screen. - Quantitative management of quality standards for the pinhole inspection process - Ensuring the quality of the product's shelf life - Establishing evaluation criteria for the manufacturing process, achieving quantitative quality assurance - Slim and space-saving design that can be connected to existing production lines - Quick changeover for product variety switching can be handled in a short time by exchanging chambers - Fully domestically produced, allowing for rapid maintenance and troubleshooting - Example target works: pillow packaging, packaged rice (packaged cooked rice), etc. *Please consult us regarding the use of this product for pharmaceuticals.

Japan is among the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of significant earthquakes occurring. For the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake measures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" ◎ For more details, please download the materials or contact us.

Hotron, which manufactures and sells sensors, provides bed exit sensors for hospitals, nursing, and care facilities. Hotron offers easy-to-understand video guidance on how to use the bed exit sensors wirelessly and how to set up device connections! ▼ Video Manual (YouTube) https://www.youtube.com/playlist?list=PLNVA4mTrZDqtJa6MfFRZQxwtfCSnAfxVy 【Bed Exit Sensors】 ○ Non-contact infrared sensor, simply place it - Pole-kun HB-H1 ○ Mat sensor, foldable thin mat - Mat-kun HB-UST ○ Body movement call - Ugo-kun HB-TV3 ○ Body movement call for wheelchairs - Ayumi-chan HB-WTV3 【Options】 ○ Nurse call linked wireless set - Wireless set (transmitter/receiver) HB-RS/HB-RJ ◎ For more information about the products, please contact us or download the catalog.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.