It was introduced as "Downtown Rocket in Nagoya" in "Sora Baka"!

A diaphragm valve that employs a latch mechanism utilizing the magnetic force of a permanent magnet. There is almost no temperature rise in the coil, and power consumption is minimized!

The "WLB Series" is a diaphragm valve that employs a latch mechanism utilizing the magnetic force of permanent magnets. Power is supplied only at the moment of opening and closing, resulting in minimal temperature rise of the coil and reduced power consumption. The orifice is 2.0mm. If you have any questions about this product, please feel free to contact us. 【Features】 ■ Employs a latch mechanism utilizing the magnetic force of permanent magnets ■ Energy-saving design that supplies power only at the moment of opening and closing ■ Minimal temperature rise of the coil and reduced power consumption ■ Orifice is 2.0mm *For more details, please refer to the PDF document or feel free to contact us.

• valve

A compact diaphragm valve with excellent chemical resistance. Its synergistic effect with the reduction of the flow path length between ports contributes to the minimization of analysis samples and reagents, as well as improved accuracy!

The "LV Series" is a compact diaphragm valve that can be installed in an area of less than 1 cm², measuring 8.9×10.4(mm). It achieves a very small internal volume of IN: 3.3μl and OUT: 8.3μl while simultaneously shortening the flow path length between ports. The body is made of PEEK, and the diaphragm is made of perfluoroelastomer, providing excellent chemical resistance. (The body material can be changed upon request.) If you have any questions about this product, please feel free to contact us. 【Features】 ■ Can be installed in an area of less than 1 cm² ■ Internal volume is only IN: 3.3 microliters, OUT: 8.3 microliters ■ Contributes to the reduction of sample and reagent volumes and improved accuracy through the synergistic effect of shortening the flow path length between ports ■ The body is made of PEEK, and the diaphragm is made of perfluoroelastomer, providing excellent chemical resistance (the body material can be changed upon request) *For more details, please refer to the PDF document or feel free to contact us.

• valve

Diaphragm valve with orifice size of φ1.2 to 1.6mm. Two-way and three-way valves are available! The body is made of molded PPS or PEEK!

The "CTV series" is a diaphragm valve with an orifice size of Φ1.2 to 1.6mm. Both 2-way and 3-way valves are available. The body is made of molded PPS or PEEK. For connection methods, in addition to screw connections and nipple types, there is also a type with built-in quick-connect fittings that make tube attachment and detachment easy. If you have any questions about this product, please feel free to contact us. 【Features】 ■ Orifice size Φ1.2 to 1.6mm ■ Both 2-way and 3-way valves are available ■ Body made of molded PPS or PEEK ■ Connection methods include screw connections and nipple types, as well as a type with built-in quick-connect fittings for easy tube attachment and detachment *For more details, please refer to the PDF document or feel free to contact us.

• valve

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed without causing any thermal impact on the base material. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If you require a detailed technical explanation, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.